The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Modular Multilevel Converter DC Fault Protection
Open accessAbstract
High-voltage direct current (HVDC) grids will require the development of dc protections that provide fast fault isolation and minimize the disturbance caused to the existing ac power networks. This paper investigates how the dc fault recovery performance of a half-bridge modular multilevel converter (HB-MMC) is impacted by different dc protection design choices. An HB-MMC point-to-point HVDC system that is protected with dc circuit breakers (CBs) is simulated on a real-time digital simulator using detailed switch models of the converters and switch gear. A dc CB controller has been developed and implemented in a software-in-the-loop fashion, and has been made available free for download. A novel blocking scheme for the HB-MMC is proposed, which limits the prospective dc-side fault current, benefiting dc switch gear. A comparison of circulating current controllers shows that the standard d -q controller is likely to be unsuitable for fault studies. Finally, benchmarking shows that a 48% reduction in power-flow recovery time and a 90% reduction in the energy dissipated in the circuit breaker can be achieved, along with other benefits, depending on the protection design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pou, J., Ceballos, S., Konstantinou, G., Agelidis, V. G., Picas, R., & Zaragoza, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336608 · Cited by 406
Self-citationThe Alternate Arm Converter: A New Hybrid Multilevel Converter With DC-Fault Blocking Capability
Merlin, M. M. C., Green, T. C., Mitcheson, P. D., Trainer, D. R., Critchley, R., Crookes, W., & Hassan, F. (2014) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2013.2282171 · Cited by 402
HVDC Grids: For Offshore and Supergrid of the Future
(2016) · Wiley eBooks · doi:10.1002/9781119115243 · Cited by 266
Impact of DC Breaker Systems on Multiterminal VSC-HVDC Stability
Wang, W., Barnes, M., Marjanovic, O., & Cwikowski, O. (2016) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2409132 · Cited by 168
Self-citationContinuous Operation of Radial Multiterminal HVDC Systems Under DC Fault
Li, R., Xu, L., Holliday, D., Page, F., Finney, S. J., & Williams, B. W. (2015) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2015.2471089 · Cited by 157
Circulating current suppressing controller in modular multilevel converter
Tu, Q., Xu, Z. G., & Zhang, J. (2010) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2010.5675048 · Cited by 145 · cited 15×
“During the transient, CCSC can only track and suppress the second harmonic component of the circulating current while FCCC actively sets a reference to the circulating current.”
MethodInfluentialDevelopment and test of a 200kV full-bridge based hybrid HVDC breaker
Zhou, W., Wei, X., Zhang, S., Tang, G., He, Z., Zheng, J., Dan, Y., & Gao, C. (2015) · European Conference on Power Electronics and Applications · doi:10.1109/epe.2015.7309153 · Cited by 134 · cited 2×
“LCSs, or similar, appear in at least three industrial prototypes [3], [4], [11].”
BackgroundAn enhanced MMC topology with DC fault ride-through capability
Li, X., Liu, W., Song, Q., Rao, H., & Xu, S. (2013) · IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society · doi:10.1109/iecon.2013.6700152 · Cited by 92 · cited 1×
“This modified blocking scheme can be used to prevent pseudo-rectifier operation, just as the double bypass thyristors can [17], [16].”
MethodOperating DC Circuit Breakers With MMC
Cwikowski, O., Wood, A. R., Miller, A., Barnes, M., & Shuttleworth, R. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2658540 · Cited by 92 · cited 2×
“This modified blocking scheme can be used to prevent pseudo-rectifier operation, just as the double bypass thyristors can [17], [16].”
BackgroundMethodSelf-citationModelling of high‐power hybrid DC circuit breaker for grid‐level studies
Lin, W., Jovcic, D., Nguefeu, S., & Saad, H. (2016) · IET Power Electronics · doi:10.1049/iet-pel.2015.0518 · Cited by 86
Research works printed but not linked: 2
- cwikowski, 2015, Analysis and simualtion of the proactive hybrid circuit breaker, Proc 11th IEEE Int Conf Power Electron Drive Syst, 4
- dupraz, 2014, Development of a 120 kV direct current circuit breaker, CIGRE
Cited by
HVDC Transmission: Technology Review, Market Trends and Future Outlook
Alassi, A., Bañales, S., Ellabban, O., Adam, G., & MacIver, C. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.04.062 · Cited by 476
“The use of DC superconducting fault-current limiters (SFCL) within VSC-HVDC transmission is suggested in the literature to mitigate this issue [169-172].”
BackgroundInfluentialModular Multilevel Converters: Recent Achievements and Challenges
Perez, M. A., Ceballos, S., Konstantinou, G., Pou, J., & Aguilera, R. P. (2021) · IEEE Open Journal of the Industrial Electronics Society · doi:10.1109/ojies.2021.3060791 · Cited by 327
Self-citationCui, S., & Sul, S.-K. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2513426 · Cited by 210
Nguyen, T. H., Hosani, K. A., Moursi, M. S. E., & Blaabjerg, F. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2862247 · Cited by 173
“The AAC arm consists of an active switch controlling the current direction and the FBSMs connected in series to produce the multilevel output voltages in positive and negative side [32], [69], [70].”
BackgroundMethodSatpathi, K., Ukil, A., & Pou, J. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2788199 · Cited by 138
“Failure mode and effect analysis [50] and fault analysis have been carried out for low-voltage dc [38], [51], [52], MVDC power systems [53], and HVDC [36], [37], [54]–[56].”
BackgroundSelf-citationA New Topology of Multilevel VSC Converter for a Hybrid HVDC Transmission System
Jung, J.-J., Cui, S., Lee, J.-H., & Sul, S. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2598368 · Cited by 131
“2(a) describes the circuit configuration of mixed HBSM and FBSM-based MMC [19]–[21].”
BackgroundInfluentialZhang, Y., Wang, H., Wang, Z., Yang, Y., & Blaabjerg, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2823664 · Cited by 128
“, redundancy [10] and fault protection [11]).”
Improved Design and Control of FBSM MMC With Boosted AC Voltage and Reduced DC Capacitance
Hu, J., Xiang, M., Lin, L., Lu, M., Zhu, J., & He, Z. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2739679 · Cited by 120
“When a dc fault occurs, the power of an ac system may fluctuate rapidly, and a converter with DC-FRT capability can control the reactive power to support the ac system [15].”
BackgroundOperation and Control Methods of Modular Multilevel Converters in Unbalanced AC Grids: A Review
Li, J., Konstantinou, G. S., Wickramasinghe, H. R., & Pou, J. (2018) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2018.2856505 · Cited by 114
“Common fault conditions that MMC-HVdc systems have to handle include: 1) SM failures [28]–[30]; 2) dc-link faults [31]–[34]; 3) asymmetric arm impedance conditions”
BackgroundSelf-citationCoordination of MMCs With Hybrid DC Circuit Breakers for HVDC Grid Protection
Wang, S., Li, C., Adeuyi, O. D., Li, G., Ugalde‐Loo, C. E., & Liang, J. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2828705 · Cited by 111
“Conversely, in [27] the MMC is bypassed based on the fault signal only and the bypass duration is based on the duration of the fault.”
BackgroundMethodResultInfluentialMission Profile-Based System-Level Reliability Prediction Method for Modular Multilevel Converters
Zhang, Y., Wang, H., Wang, Z., Blaabjerg, F., & Saeedifard, M. (2020) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2957826 · Cited by 105
“Accordingly, previous studies propose many solutions to improve its reliability, such as redundancies [3], fault-tolerant controls [4], and sizing components with excessive design margins (e.”
BackgroundBeyond the MMC: Extended Modular Multilevel Converter Topologies and Applications
Sun, P., Tian, Y., Pou, J., & Konstantinou, G. S. (2022) · IEEE Open Journal of Power Electronics · doi:10.1109/ojpel.2022.3175714 · Cited by 108
Self-citationLu, M., Hu, J., Zeng, R., Li, W., & Lin, L. (2017) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2017.2743780 · Cited by 91
“1(a) depicts one leg of the symmetric hybrid MMC proposed in [9] and [10], where each arm consists of N submodules (SM), i.”
BackgroundAn Improved Phase-Shifted Carrier Modulation Scheme for a Hybrid Modular Multilevel Converter
Lu, S., Yuan, L., Li, K., & Zhao, Z. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2532386 · Cited by 75
“The hybrid MMC composed of the HBSMs and the FBSMs not only can control the dc fault current to be zero but also can control the ac grid-side reactive power to support the ac grid during the dc-side fault condition, that is, the dc-side fault ride-through capability [15], [16].”
BackgroundHVdc Reactor Reduction Method Based on Virtual Reactor Fault Current Limiting Control of MMC
Li, X., Li, Z., Zhao, B., Lü, C., Song, Q., Zhou, Y., Rao, H., Xu, S., & Zhu, Z. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2960735 · Cited by 68
“Hybrid dc breakers can limit dc fault current by modulating the secondary semiconductor switch branch when the mechanical switch is fully open [3], [20].”
BackgroundInfluentialTian, Y., Wickramasinghe, H. R., Li, Z., Pou, J., & Konstantinou, G. S. (2022) · Energies · doi:10.3390/en15061985 · Cited by 62
“The lack of dc-fault tolerance of the typical HBSM-based MMC can be overcome by introducing various bipolar SMs that have dc-fault blocking capability within the arms [79].”
BackgroundSelf-citationA Modular Multilevel Converter Integrated With DC Circuit Breaker
Song, Q., Zeng, R., Yu, Z., Liu, W., Huang, Y., Yang, W., & Li, X. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2815550 · Cited by 59
“The other way is using the modified blocking scheme, which switches off all the upper IGBTs (SU) and switches on all the lower IGBTs (SL) in each SM [24], as depicted in Fig.”
MethodReview of technologies for DC grids – power conversion, flow control and protection
Adam, G. P., Vrana, T. K., Li, R., Li, P., Burt, G., & Finney, S. J. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5719 · Cited by 58
“DCCB, the LCS is turned off to initiate commutation of the dc fault current from the principle conduction path to the main circuit breaker (MCB), which is a typical high-voltage semiconductor switch, capable of carrying high current for short period (<10ms) [90, 91].”
BackgroundAlternate Arm Converters-Based HVDC Model Compatible With the CIGRE B4 DC Grid Test System
Wickramasinghe, H. R., Konstantinou, G. S., Li, Z., & Pou, J. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2850933 · Cited by 52
“Further research on dc-breakers [5] and dc-fault tolerant topologies for VSC-based HVDC will assure more resilient MTDC grids in the future [6].”
BackgroundSelf-citationLee, J.-H., Jung, J.-J., & Sul, S. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2019.2896336 · Cited by 52
“According to this requirement, many researches on topologies regarding MMC were conducted and developed, such as half-bridge submodule MMC (HBSMMMC) with high-power diode [6], full-bridge submodule MMC (FBSM-MMC) [7], [8], and HBSM-FBSM mixed hybrid MMC [9]–[12].”
BackgroundCui, S., Kim, S., Jung, J.-J., & Sul, S. (2014) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2014.6803371 · Cited by 52
A non-unit boundary protection of DC line for MMC-MTDC grids
Zhang, S., Zou, G., Wang, C., Li, J., & Xu, B. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.105538 · Cited by 51
Jiang, S., Xin, Y., Li, G., & Wang, L. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.2991722 · Cited by 43
“of MMCs and DCCBs based on the method of [15], where the fault current can be effectively limited by temporarily bypassing”
BackgroundMethodLu, M., Hu, J., Zeng, R., & He, Z. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2755505 · Cited by 42
“With a trade-off consideration of cost and efficiency, hybrid MMC consisting of half HBSMs and half FBSMs is a promising solution [16], [17], and the HVDC systems based on the hybrid MMC can still transmit certain active power via the healthy DC pole under the PTG fault conditions [11], [18].”
BackgroundGradient-Based Energy Balancing and Current Control for Alternate Arm Converters
Wickramasinghe, H. R., Konstantinou, G. S., & Pou, J. (2017) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2017.2785386 · Cited by 42
“This can be provided using i) dc-breakers [6] or ii) dc-fault tolerant converter topologies.”
MethodSelf-citationDC Fault Current Blocking With the Coordination of Half-Bridge MMC and the Hybrid DC Breaker
Iman‐Eini, H., & Liserre, M. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2935980 · Cited by 41
“Hence, to control the slope of fault current in these breakers, large dc reactors are used in series with the breakers, which may cause voltage instability problem in dc grids [18].”
A Cost-Effective and DC-Fault Tolerant Alternate Arm Converter With Wide Range Voltage Adaptability
Fan, S., Chen, C., Yang, H., Xiang, X. J., Yang, H., Li, W., & He, X. (2021) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2021.3120748 · Cited by 38
“it equals a three-phase short-circuit during dc fault [6], [7].”
BackgroundReview on topology‐based dc short‐circuit fault ride‐through strategies for MMC‐based HVDC system
Wan, Y., Mao, M., Zhou, L., Xi, X., Xie, B., & Zhou, S. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2019.0607 · Cited by 37
Pole Rebalancing Methods for Pole-to-Ground Faults in Symmetrical Monopolar HVDC Grids
Wang, M., Leterme, W., Chaffey, G. P., Beerten, J., & Hertem, D. V. (2018) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2018.2853704 · Cited by 35
“Most literature have focused on DC faults in low impedance grounded grids as these fault conditions entail the most stringent requirement on the breaking current [8]–[10].”
BackgroundSingle‐ended line protection for MMC‐MTDC grids
Zhang, S., Zou, G., Huang, Q., Xu, B., & Li, J. (2019) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2018.6903 · Cited by 35
A Differential Pilot Protection Scheme for MMC-Based DC Grid Resilient to Communication Failure
Xiang, W., Zhang, H., Yang, S., Zhou, M., Lin, W., & Wen, J. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3035672 · Cited by 33
“Many protection schemes in time-domain and frequency-domain are proposed, utilizing the transient voltage and current traveling waves (TWs) and the boundary protection algorithms based on current-limiting inductors [6][7].”
BackgroundHybrid DC circuit breaker with coupled inductor for automatic current commutation
Pei, X., Smith, A. C., Cwikowski, O., & Barnes, M. (2020) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2020.106004 · Cited by 31
“…in a DC system is significantly more challenging than in an AC system because: firstly, there are no Email address: x.pei@bath.ac.uk. natural zero-crossings of the current to enable interruption of the fault; secondly, the rate of rise of the fault current is much higher in DC networks [12-15].”
BackgroundSelf-citationA STATCOM Based on a Three-Phase, Triple Inverter Modular Topology for Multilevel Operation
Pires, V. F., Cordeiro, A., Foito, D., & Silva, J. F. (2019) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2019.2923087 · Cited by 28
“Additionally, over the last years several other solutions for STATCOM and/or high-voltage direct current (HVDC) applications based on Modular Multilevel Converters (MMC) have also been presented [28]–[36].”
BackgroundDC fault current limiting effect of MMC submodule capacitors
Li, X., Zhao, B., Wei, Y., Xie, X., Hu, Y., & Shu, D. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.105444 · Cited by 25
A global fault current limiting strategy for the MMC-HVDC grid with a reduced DC reactor
Gong, Z., Zhao, S., Wu, X., Zheng, C., & Zhou, J. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108088 · Cited by 23
Centralized Locating Strategy of Fault Current Limiters in MMC-Based Multiterminal HVdc Grid
Tang, S. Y., Chen, M., Jia, G., Zhang, C., Jiang, F., He, Z., Yang, H., & Li, W. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3027385 · Cited by 22
A new topology of multilevel VSC converter for hybrid HVDC transmission system
Jung, J.-J., Cui, S., & Sul, S. (2016) · Conference proceedings/Conference proceedings - IEEE Applied Power Electronics Conference and Exposition · doi:10.1109/apec.2016.7468234 · Cited by 22
“2(c) describes the circuit configuration of mixed HBSM and FBSM based MMC [6-8].”
BackgroundLifetime-Based Selection Procedures for DC Circuit Breaker Varistors
Zhang, Z. J., Bosworth, M., Xu, C., Rockhill, A., Zeller, P. J., Saeedifard, M., Graber, L., & Steurer, M. M. (2022) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3177158 · Cited by 21
Zero-/Low-Speed Operation of Multiphase Drive Systems With Modular Multilevel Converters
Daoud, M., Elserougi, A. A., Massoud, A. M., Bojoi, R. I., Abdel-Khalik, A. S., & Ahmed, S. (2019) · IEEE Access · doi:10.1109/access.2019.2893526 · Cited by 21
“Recently, Modular Multilevel Converter (MMC) has emerged as a feasible option for high-power medium-/high-voltage applications thanks to converter construction that yields modularity, scalability, lower output harmonic content, and transformerless operation [3]–[7].”
BackgroundDC Fault Management Strategy for Continuous Operation of HVDC Grids Based on Customized Hybrid MMC
Psaras, V., Vozikis, D., Adam, G. P., & Burt, G. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3048085 · Cited by 21
“In addition, coordination of the HB-MMC with hybrid DCBBs has been proposed in [13], [14], where the Half-Bridge Sub-modules (HB-SMs) are immediately bypassed after DC fault detection in an effort to suppress the DC fault current and support the DCCBs.”
BackgroundXiang, M., Hu, J., & Qiu, Y. (2018) · High Voltage · doi:10.1049/hve.2018.5050 · Cited by 20
“When a DC fault occurs, the power of an AC system may fluctuate rapidly, and a converter with DC-FRT capability can control the reactive power to support the AC system [12].”
BackgroundArm Overcurrent Protection and Coordination in MMC-HVDC
Tu, Q., Li, Y., Liu, W., Huang, M., Zeng, G., Du, B., & Wu, Z. (2018) · IEEE Power Engineering Society General Meeting · doi:10.1109/pesgm.2018.8585924 · Cited by 20
Research on a Novel DC Circuit Breaker Based on Artificial Current Zero-Crossing
Teng, S., Zhang, Z., & Xiao, L. (2020) · IEEE Access · doi:10.1109/access.2020.2975080 · Cited by 19
An improved averaged value model of MMC-HVDC for power system faults simulation
Song, G., Wang, T., Huang, X., & Zhang, C. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.03.016 · Cited by 18
Zero DC voltage ride through of a hybrid modular multilevel converter in HVDC systems
Lu, M., Hu, J., Lin, L., & Xu, K. (2016) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2016.0108 · Cited by 17
HVDC Grid Post-DC Fault Recovery Enhancement
Abedrabbo, M., Dejene, F. Z., Leterme, W., & Hertem, D. V. (2020) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2020.3002717 · Cited by 17
“The authors in [10] compared the influence of two types of CCSC on the converter recovery, and they concluded that the standard DQ-type CCSC is not suitable for post-fault recovery, while the converter recovery shows significant improvement using the CCSC proposed in [11].”
MethodInteroperability of Modular Multilevel and Alternate Arm Converters in Hybrid HVDC Systems
Wickramasinghe, H. R., Sun, P., & Konstantinou, G. S. (2021) · Energies · doi:10.3390/en14051363 · Cited by 16
Self-citationZhang, Y., Wang, H., Wang, Z., & Blaabjerg, F. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2925590 · Cited by 16
“Although many redundancy schemes [5] and fault protection methods [6] are proposed to improve the reliability of MMCs, these methods usually sacrifices some important characters, such as cost, footprint, and power density.”
Thyristor Branch Loop-Based Hybrid Modular Multilevel Converters for DC Short-Circuit Faults
Li, H., Deng, F., Zhu, Z., Lin, J., & Zhou, Q. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2024.3431947 · Cited by 15
A pilot protection scheme for flexible HVDC transmission lines based on modulus power
Ma, J., Xiao, Z., & Cheng, P. (2021) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2021.107849 · Cited by 15
Fault-tolerant control of MMCs based on SCDSMs in HVDC systems during DC-cable short circuits
Hosani, K. H. A., Nguyen, T. H., & Sayari, N. A. (2018) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2018.01.056 · Cited by 14
Li, B., Jiao, X., Wen, W., Wang, W., & Li, B. (2021) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2021.3111683 · Cited by 14
A Novel Series-Connected Asymmetric Hybrid Modular Multilevel Converter for HVDC Tapping Application
Wang, C., Yang, Y., Long, Z., & Pan, X. (2019) · IEEE Access · doi:10.1109/access.2019.2906378 · Cited by 14
“A symmetric hybrid modular multilevel converter (SH-MMC) is presented in [26].”
MethodElserougi, A. A., Abdelsalam, I., Massoud, A. M., & Ahmed, S. (2020) · IEEE Access · doi:10.1109/access.2020.2966048 · Cited by 13
“Recently, the modular multilevel converter (MMC) has been proposed for high-voltage high-power applications due to its modularity, scalability, and output voltage quality [4]–[7], which makes it suitable for high-power AC drive applications.”
Modular Multilevel Converter With Self-Energy Equalization for Medium Voltage AC Drive Applications
Elserougi, A. A., Abdelsalam, I., Massoud, A. M., & Ahmed, S. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.3045585 · Cited by 12
Tian, Y., Wickramasinghe, H. R., Sun, P., Li, Z., Pou, J., & Konstantinou, G. S. (2021) · IEEE Access · doi:10.1109/access.2021.3130588 · Cited by 12
“One of the commonly used solutions for DC protection is that of a DC circuit breaker (DCCB) as external protection [12].”
BackgroundSelf-citationLi, H., Jiang, H., Liang, Y., Xu, Y., & Wang, G. (2023) · Electric Power Systems Research · doi:10.1016/j.epsr.2023.109199 · Cited by 12
Düllmann, P., Brantl, C., Klein, C., & Moser, A. (2023) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12812 · Cited by 11
Wang, J., Gao, S., Ji, Z., Sun, Y., Hong, L., Luo, F., & Gu, W. (2018) · IET Renewable Power Generation · doi:10.1049/iet-rpg.2018.5041 · Cited by 11
Konstantinou, G. S., Wickramasinghe, H. R., Ceballos, S., & Pou, J. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507725 · Cited by 12
“The first option comes at the cost of increased conduction losses and the latter requires a costly and bulky dc-breaker together with a dc-side inductor to limit the rate of rise of current in the dc-side, allowing the protection system to operate effectively [8].”
BackgroundSelf-citationA Novel Review on Modular Multilevel Converter for Induction Motor Drive Applications
Reddy, E. A. P. D. (2021) · Türk bilgisayar ve matematik eğitimi dergisi · doi:10.17762/turcomat.v12i10.5471 · Cited by 10
“The control strategies in this modular multilevel converter are designed to operate in number of modules to obtain modularity, scalability, and output voltage quality [4-7].”
BackgroundMethodFault Current and Voltage Estimation Method in Symmetrical Monopolar MMC-based DC Grids
Yu, J., Zhang, Z., & Xu, Z. G. (2022) · Journal of Modern Power Systems and Clean Energy · doi:10.35833/mpce.2021.000077 · Cited by 10
DC protection coordination for multi‐terminal HB‐MMC‐based HVDC grids
Niaki, S. H. A., Chen, Z., Bak‐Jensen, B., Sharifabadi, K., Liu, Z., & Hu, S. (2023) · IET Renewable Power Generation · doi:10.1049/rpg2.12903 · Cited by 10
Mei, J., Ge, R., Liu, Z., Zhan, X., Fan, G., Zhu, P., & Chen, W. (2020) · IEEE Access · doi:10.1109/access.2020.3004434 · Cited by 10
“In order to meet the requirements for rapidity of fault identification, scholars have proposed that the method based on single-terminal electrical quantities should be adopted [8], [9].”
DC fault current clearance coordinated control strategy for DC grid with hybrid MMC
Jiang, S., Wang, T., Li, G., Xin, Y., & Wang, L. (2024) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2024.110189 · Cited by 9
Pourfaraj, A., Iman‐Eini, H., Hamzeh, M., Langwasser, M., & Liserre, M. (2024) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2024.3447094 · Cited by 9
“To reduce the DCCB requirements and limit the fault current, Wang et al. [3] and Cwikowski et al. [10] presented the coordination between the conventional single-line DCCBs and half-bridge MMCs (HB-MMCs) by blocking and bypassing the MMC submodules (SMs), respectively.”
BackgroundA DC Fault Ride-Through Control of Half-Bridge MMCs for the HVDC Grid with DC Circuit Breakers
Chiba, A., Sano, K., Koyama, Y., Sekiguchi, K., Ishiguro, T., & Suzuki, D. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9807072 · Cited by 9
Interoperability of modular VSC topologies in Multi-converter multiterminal DC systems
Wickramasinghe, H. R., & Konstantinou, G. S. (2021) · Electric Power Systems Research · doi:10.1016/j.epsr.2021.107225 · Cited by 9
Self-citationActive Fault Current Limiting Control for Half-bridge MMC in HVDC Systems
Huang, P., Shah, S., & Vanfretti, L. (2023) · IEEE ... Workshop on Control and Modeling for Power Electronics · doi:10.1109/compel52896.2023.10221028 · Cited by 8
“However, current bypassing schemes present several limitations: 1) Bypass strategies in [9], [10] are initiated when protection detects a dc fault, usually 2 ∼ 3 ms”
BackgroundMethodInfluentialElserougi, A. A., Diab, M. S., Massoud, A. M., & Ahmed, S. (2020) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2020.3000654 · Cited by 8
Chattopadhyay, S. K., & Chakraborty, C. (2019) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2018.2890575 · Cited by 7
“However, this technology requires a DC breaker to handle dc-side line-fault [10], [11], and higher amount of dc-bus capacitor to maintain cell voltages within tolerable limit.”
BackgroundSingle-ended DC line protection scheme based on first peak time of current-limiting reactor voltage
Wei, X., Zou, G., Chen, C., Zhang, S., Zhou, C., & Song, S. (2023) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2023.109100 · Cited by 7
DC Fault Analysis of Modular DC/DC Converter Employing a New Submodule With Damping-Resistor
You, H., Cai, X., Yao, L., Cao, Y., & Wang, Z. (2018) · IEEE Access · doi:10.1109/access.2018.2878683 · Cited by 5
“The recovery control of HBSM based MMC with dc CB was developed in [27] and [28], the automatic recovery control of MMC employing the HBSM with double thyristor switches was discussed in [29], and the fast recovery control of hybrid MMC was proposed in [19] and [23].”
MethodMa, J., Xiao, Z., Li, Y., Zhang, J., Wu, B., Li, Z., Ma, R., Huang, W., & Cheng, P. (2022) · IET Generation Transmission & Distribution · doi:10.1049/gtd2.12472 · Cited by 5
A Three-stage AC side startup strategy for hybrid MMC
Chen, C., Zhou, L., Guan, H., Dong, Q., & Zhang, K. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2022.108920 · Cited by 5
Xu, Y., Zhang, Y., Qin, L., Liu, K., & Blaabjerg, F. (2022) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2021.107874 · Cited by 5
“Introduction Half-bridge modular multilevel converter (HB MMC) based high voltage direct current (HVDC) transmission is a promising and flexible solution to integrate a large scale of renewable energy resources [1-5].”
BackgroundTang, S. Y., Chen, M., Ji, Y., & Wang, C. (2025) · IEEE Transactions on Power Delivery · doi:10.1109/tpwrd.2025.3626141 · Cited by 4
An improved submodule unified pulse modulation scheme for a hybrid modular multilevel converter
Lu, S., Li, K., Deng, X., Li, S., & Zhao, Z. (2017) · CES Transactions on Electrical Machines and Systems · doi:10.23919/tems.2017.8086112 · Cited by 4
Modular multilevel converter based on arm transfer to clear dc fault
Wang, Z., Liu, J., Xiao, Z., Wang, C., & Li, G. (2019) · IET Generation Transmission & Distribution · doi:10.1049/iet-gtd.2018.6311 · Cited by 4
A Novel Protective Scheme to Improve Half-Bridge MMC Operation against DC Fault Condition
Saleki, A., Rezazade, S., Pordanjani, B. J., Gupta, M., & Bina, M. T. (2022) · Power Electronics, Drive Systems, and Technologies Conference (PEDSTC) · doi:10.1109/pedstc53976.2022.9767295 · Cited by 4
Asymmetric Mixed Modular Multilevel Converter Topology in Hybrid Bipolar HVDC Transmission Systems
Lee, J.-H., Jung, J.-J., & Sul, S. (2018) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec.2018.8507442 · Cited by 3
“The MMC system at receiving end consists of two ASYM-MMCs, i.e. the positive MMC and negative MMC which require no reactive power from AC grid and even can be operated as a STATCOM.”
MethodZhang, Y., Wang, H., Wang, Z., & Blaabjerg, F. (2018) · IEEE Energy Conversion Congress and Exposition (ECCE) · doi:10.1109/ecce.2018.8558180 · Cited by 3
“, redundancy [3] and fault protection control [4]) are proposed to improve the MMC’s reliability, these methods usually sacrifice some important characters, such as costs, footprint and power density.”
BackgroundLin, Y., Wickramasinghe, H. R., & Konstantinou, G. S. (2018) · Asia-Pacific Power and Energy Engineering Conference (APPEEC) · doi:10.1109/appeec.2018.8566399 · Cited by 3
“An additional parasitic inductor (Lp) is added to the secondary branch to obtain realistic commutation time [4].”
BackgroundSelf-citationOn Systematic DC Fault-Ride-Through of Multi-terminal MMC-HVDC Grids
Niaki, S. H. A., Chen, Z., Bak‐Jensen, B., Sharifabadi, K., Liu, Z., & Hu, S. (2021) · International Universities Power Engineering Conference (UPEC) · doi:10.1109/upec50034.2021.9548154 · Cited by 3
Investigation on the Pattern of Transient Energy Flow under DC Fault of MMC-HVDC Grid
Mao, M., Cheng, D., & Chang, L. (2019) · IEEE Workshop on the Electronic Grid (eGRID) · doi:10.1109/egrid48402.2019.9092644 · Cited by 3
Current Suppression Method for DC Side Short Circuit Fault of MMC
Xin, Y., Yang, Y. M., Wang, W., Wang, T., Xu, G., & Dong, Q. (2019) · IEEE Workshop on the Electronic Grid (eGRID) · doi:10.1109/egrid48402.2019.9092659 · Cited by 3
Wang, Z., Hou, Z., Wang, S., & Wang, W. (2020) · IEEJ Transactions on Electrical and Electronic Engineering · doi:10.1002/tee.23248 · Cited by 3
A Hybrid VSC-HVDC System based on Modular Multilevel Converter and Alternate Arm Converter
Wickramasinghe, H. R., Sun, P., & Konstantinou, G. S. (2020) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon43393.2020.9254704 · Cited by 3
Self-citationShu, H., Zhao, W., & Shao, Z. (2025) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2025.3574531 · Cited by 2
A Novel DC Fault Ride-through Coordinated Control Strategy for DC Grid with Hybrid MMC
Jiang, S., Li, G., Wang, X., Xin, Y., Wang, W., & Wang, Y. (2022) · IEEE International Electrical and Energy Conference (CIEEC) · doi:10.1109/cieec58067.2023.10166667 · Cited by 2
TOV in SMs during MMC riding through zero DC voltage fault: analysis and suppression
Hu, J., Lu, M., & Lin, L. (2016) · The Journal of Engineering · doi:10.1049/joe.2016.0194 · Cited by 2
An Efficient Topology of Modular-Multilevel Converter with Alternative Arm Operation
Nguyen, T. H., Hosani, K. H. A., Moursi, M. S. E., & Sayari, N. A. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591482 · Cited by 2
“An inherent drawback of the HBSM-based MMC is the lack of the fault-handling capability even disabling all the IGBTs in the MMC under the DC short-circuit conditions, which occasionally occur on the long-distance DC cables of the HVDC transmission systems [9], [10].”
BackgroundA Novel Overcurrent Suppression Strategy during Reclosing Process of MMC-HVDC
Jiang, B., & Gong, Y. (2019) · Applied Sciences · doi:10.3390/app9091737 · Cited by 2
“When a short-circuit fault occurs on the DC line, very large fault currents will be caused in the DC lines and converters [6].”
BackgroundOptimal Shunt Busbar Capacitor Placement for Selective Protection of Large-Scale VSC-MTDC Grids
Ashouri, M., da Silva, F. F., & Bak, C. L. (2021) · Electric Power Systems Research · doi:10.1016/j.epsr.2021.107458 · Cited by 2
DC Fault Ride-Through Control of Half-Bridge MMCs for the HVDC Grid with DC Circuit Breakers
Chiba, A., Sano, K., Koyama, Y., Sekiguchi, K., Ishiguro, T., & Suzuki, D. (2022) · IEEJ Journal of Industry Applications · doi:10.1541/ieejjia.22006950 · Cited by 2
Sakib, M. N., Azad, S. P., & Kazerani, M. (2022) · Energies · doi:10.3390/en15134595 · Cited by 1
“One approach is to block the IGBTs and prevent SM discharge completely.”
MethodInfluentialA novel flexible fault current limiter for DC distribution applications
Zheng, F., Yang, F. F., Liu, B., Zhong, H., Huang, Y., & Liang, N. (2025) · Electric Power Systems Research · doi:10.1016/j.epsr.2025.111919 · Cited by 1
A Fast DC Line Protection for MMC-MTDC Grids Based on PSVTWs
Zhang, S., Zou, G., Huang, Q., & Gao, H. (2019) · IEEE Power Engineering Society General Meeting · doi:10.1109/pesgm40551.2019.8973706 · Cited by 1
“usually installed at each terminal of the DC line [2].”
BackgroundResearch on a Novel AC Side Start-up Strategy for Hybrid Modular Multilevel Converter
Chen, C., Guan, H., Lin, S., Xiong, J., & Zhang, K. (2020) · IEEE China International Youth Conference on Electrical Engineering (CIYCEE) · doi:10.1109/ciycee49808.2020.9332695 · Cited by 1
HVDC for Grid Services in Electric Power Systems
Jang, G. (2019) · MDPI eBooks · doi:10.3390/books978-3-03921-763-2 · Cited by 1
Metadata
- Authors
- Cwikowski, O., Wickramasinghe, H. R., Konstantinou, G., Pou, J., Barnes, M., & Shuttleworth, R.
- Affiliations
- University of Manchester (GB)
- UNSW Sydney (AU)
- Nanyang Technological University (SG)
- Venue
- IEEE Transactions on Power Delivery
- Published
- 2018-02
- Volume
- 33
- Issue
- 1
- Pages
- 291-300
- ISSN
- 0885-8977 (ISSN-L)
- 1937-4208
- OpenAlex
- W2626022691
- Cited by
- 118
- References
- 17
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 7 · 2023: 8 · 2022: 14 · 2021: 11 · 2020: 18 · 2019: 21 · 2018: 17
- FWCI
- 7.05
- Type
- journal article
- Language
- en
- Open access
- Licence
- Locations
- IEEE Transactions on Power Delivery (publishedVersion)
- Research Explorer (The University of Manchester) (publishedVersion, other-oa)
- UNSWorks (University of New South Wales, Sydney, Australia) (submittedVersion, cc-by-nc-nd)
- UNSWorks (UNSW Sydney) (submittedVersion, cc-by-nc-nd)
- DR-NTU (Nanyang Technological University) (submittedVersion)
- Funders
- Engineering and Physical Sciences Research Council
- National Grid (EP/L021552/1, TAO/22360)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › HVDC Systems and Fault Protection
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Multilevel Inverters and Converters
- Physical Sciences › Engineering › Control and Systems Engineering › Power Systems Fault Detection
- Keywords
- modular multilevel converter, HVDC grids, DC fault protection, DC circuit breakers, fault recovery, blocking schemes, circulating current control, dq control, point-to-point HVDC, real-time digital simulation, software-in-the-loop simulation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.