The DOI matches its Crossref record; 175 of the 175 references it cites were found in a registry or an index.
Failure Prognosis and Applications—A Survey of Recent Literature
Abstract
Fault diagnosis and prognosis are some of the most crucial functionalities in complex and safety-critical engineering systems, and particularly fault diagnosis, has been a subject of intensive research in the past four decades. Such capabilities allow for detection and isolation of early developing faults as well as prediction of fault propagation, which can allow for preventive maintenance, or even serve as a countermeasure to the possibility of catastrophic incidence as a result of a failure. Following a short preliminary overview and definitions, this article provides a survey of recent research on fault prognosis. Additionally, we report on some of the significant application domains where prognosis techniques are employed. Finally, some potential directions for future research are outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on machinery diagnostics and prognostics implementing condition-based maintenance
Jardine, A. K. S., Lin, D., & Banjevic, D. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.09.012 · Cited by 4,816
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
Lei, Y., Li, N., Guo, L., Li, N., Yan, T., & Lin, J. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.11.016 · Cited by 2,634
Artificial intelligence for fault diagnosis of rotating machinery: A review
Liu, R., Yang, B., Zio, E., & Chen, X. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.02.016 · Cited by 2,188
Remaining useful life estimation – A review on the statistical data driven approaches
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2011) · European Journal of Operational Research · doi:10.1016/j.ejor.2010.11.018 · Cited by 2,162
A survey of design methods for failure detection in dynamic systems
Willsky, A. S. (1976) · Automatica · doi:10.1016/0005-1098(76)90041-8 · Cited by 2,153
Lee, J., Wu, F., Zhao, W., Ghaffari, M., Liao, L., & Siegel, D. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.06.004 · Cited by 1,594
A survey of design methods for failure detection in dynamic systems
(1977) · Microelectronics Reliability · doi:10.1016/0026-2714(77)90326-2 · Cited by 1,421
Zhang, Y., Xiong, R., He, H., & Pecht, M. G. (2018) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2805189 · Cited by 1,326
Rotating machinery prognostics: State of the art, challenges and opportunities
Heng, A., Zhang, S., Tan, A. C. C., & Mathew, J. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.06.009 · Cited by 1,207
Intelligent Fault Diagnosis and Prognosis for Engineering Systems
Vachtsevanos, G., Lewis, F., Roemer, M., Hess, A., & Wu, B. (2006) · Wiley eBooks · doi:10.1002/9780470117842 · Cited by 1,134
Prognostic modelling options for remaining useful life estimation by industry
Sikorska, J. Z., Hodkiewicz, M., & Ma, L. (2011) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2010.11.018 · Cited by 947
Remaining useful life estimation of engineered systems using vanilla LSTM neural networks
Wu, Y., Yuan, M., Dong, S., Lin, L., & Liu, Y. (2018) · Neurocomputing · doi:10.1016/j.neucom.2017.05.063 · Cited by 789
State-of-Charge Estimation for Lithium-Ion Batteries Using Neural Networks and EKF
Charkhgard, M., & Farrokhi, M. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2043035 · Cited by 779
Estimation of Bearing Remaining Useful Life Based on Multiscale Convolutional Neural Network
Zhu, J., Chen, N., & Peng, W. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2844856 · Cited by 704
An Improved Exponential Model for Predicting Remaining Useful Life of Rolling Element Bearings
Li, N., Lei, Y., Lin, J., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2455055 · Cited by 686
Nuhic, A., Terzimehic, T., Soczka-Guth, T., Buchholz, M., & Dietmayer, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.11.146 · Cited by 664
Wei, J., Dong, G., & Chen, Z. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2782224 · Cited by 643 · cited 4×
“(SVR) and PF methods is developed in [175].”
MethodInfluentialA Model-Based Method for Remaining Useful Life Prediction of Machinery
Lei, Y., Li, N., Gontarz, S., Lin, J., Radkowski, S., & Dybala, J. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2016.2570568 · Cited by 617
Liao, L., & Kottig, F. (2014) · IEEE Transactions on Reliability · doi:10.1109/tr.2014.2299152 · Cited by 563
Wu, J., Zhang, C., & Chen, Z. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.04.057 · Cited by 528
Chen, J., Jing, H., Chang, Y., & Liu, Q. (2019) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2019.01.006 · Cited by 497
Using Deep Learning-Based Approach to Predict Remaining Useful Life of Rotating Components
Deutsch, J., & He, D. (2018) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2697842 · Cited by 479
CAPABILITY MEASURES FOR m -DEPENDENT STATIONARY PROCESSES
CHEN, S.-M., HSU, Y.-S., & PEARN, W. L. (2003) · Statistics: A Journal of Theoretical and Applied Statistics · doi:10.1080/02331880309257 · Cited by 475
A particle-filtering approach for on-line fault diagnosis and failure prognosis
Orchard, M. E., & Vachtsevanos, G. J. (2009) · Transactions of the Institute of Measurement and Control · doi:10.1177/0142331208092026 · Cited by 463
Self-citationMetrics for Offline Evaluation of Prognostic Performance
Saxena, A., Celaya, J., Saha, B., Saha, S., & Goebel, K. (2021) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2010.v1i1.1336 · Cited by 449
Direct Remaining Useful Life Estimation Based on Support Vector Regression
Khelif, R., Chebel-Morello, B., Malinowski, S., Laajili, E., Fnaiech, F., & Zerhouni, N. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2623260 · Cited by 438
System health monitoring and prognostics — a review of current paradigms and practices
Kothamasu, R., Huang, S. H., & VerDuin, W. H. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2131-6 · Cited by 424
A review on prognostic techniques for non-stationary and non-linear rotating systems
Kan, M. S., Tan, A. C. C., & Mathew, J. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.02.016 · Cited by 381
Extended Kalman Filtering for Remaining-Useful-Life Estimation of Bearings
Singleton, R. K., Strangas, E. G., & Aviyente, S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2336616 · Cited by 364
RUL Prediction of Deteriorating Products Using an Adaptive Wiener Process Model
Zhai, Q., & Ye, Z.-S. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2684821 · Cited by 363
Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., Wang, P., & Taek Yoon, J. (2012) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.03.008 · Cited by 361
A Two-Stage Data-Driven-Based Prognostic Approach for Bearing Degradation Problem
Wang, Y., Peng, Y., Zi, Y., Jin, X., & Tsui, K.-L. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2535368 · Cited by 344
Guha, A., & Patra, A. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2776558 · Cited by 318
Prognosis of Defect Propagation Based on Recurrent Neural Networks
Malhi, A., Yan, R., & Gao, R. X. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2010.2078296 · Cited by 314
Liu, D., Zhou, J., Liao, H., Peng, Y., & Peng, X. (2015) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2015.2389757 · Cited by 313
System Health Monitoring and Prognostics – A Review of Current Paradigms and Practices
Kothamasu, R., Huang, S. H., & VerDuin, W. H. (2009) · Springer eBooks · doi:10.1007/978-1-84882-472-0_14 · Cited by 310
Xu, J., Mi, C. C., Cao, B., & Cao, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.094 · Cited by 304
Loutas, T. H., Roulias, D., & Georgoulas, G. (2013) · IEEE Transactions on Reliability · doi:10.1109/tr.2013.2285318 · Cited by 302
Guha, A., & Patra, A. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2809138 · Cited by 293
Remaining Useful Life Estimation of Critical Components With Application to Bearings
Medjaher, K., Tobon-Mejia, D. A., & Zerhouni, N. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2194175 · Cited by 292
Wang, D., Yang, F., Tsui, K.-L., Zhou, Q., & Bae, S. J. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2534258 · Cited by 287
Pattipati, B., Sankavaram, C., & Pattipati, K. (2011) · IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews) · doi:10.1109/tsmcc.2010.2089979 · Cited by 267
Remaining useful life prediction of aircraft engine based on degradation pattern learning
Zhao, Z., Liang, B., Wang, X., & Lu, W. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.02.007 · Cited by 267
Zheng, X., & Fang, H. (2015) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2015.07.013 · Cited by 260
Vibration condition monitoring of planetary gearbox under varying external load
Bartelmus, W., & Zimroz, R. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.03.016 · Cited by 259
Liao, L., & Köttig, F. (2016) · Applied Soft Computing · doi:10.1016/j.asoc.2016.03.013 · Cited by 258
A New Method Based on Stochastic Process Models for Machine Remaining Useful Life Prediction
Lei, Y., Li, N., & Lin, J. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2601004 · Cited by 253
Saidi, L., Ben Ali, J., Bechhoefer, E., & Benbouzid, M. (2017) · Applied Acoustics · doi:10.1016/j.apacoust.2017.01.005 · Cited by 252
Tran, V. T., Thom Pham, H., Yang, B.-S., & Tien Nguyen, T. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.02.015 · Cited by 248
An Adaptive Prognostic Approach via Nonlinear Degradation Modeling: Application to Battery Data
Si, X.-S. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2393840 · Cited by 245
Battery Health Prognosis Using Brownian Motion Modeling and Particle Filtering
Dong, G., Chen, Z., Wei, J., & Ling, Q. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2813964 · Cited by 242
Zhang, Y., Xiong, R., He, H., & Pecht, M. G. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2808918 · Cited by 242
A hybrid ARIMA–SVM model for the study of the remaining useful life of aircraft engines
Ordóñez, C., Sánchez Lasheras, F., Roca-Pardiñas, J., & Juez, F. J. D. C. (2019) · Journal of Computational and Applied Mathematics · doi:10.1016/j.cam.2018.07.008 · Cited by 240
A review on degradation models in reliability analysis
Gorjian, N., Ma, L., Mittinty, M., Yarlagadda, P., & Sun, Y. (2010) · Engineering Asset Lifecycle Management · doi:10.1007/978-0-85729-320-6_42 · Cited by 239
Health Index-Based Prognostics for Remaining Useful Life Predictions in Electrical Machines
Yang, F., Habibullah, M. S., Zhang, T., Xu, Z., Lim, P., & Nadarajan, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2515054 · Cited by 238
Prognosis of Bearing Acoustic Emission Signals Using Supervised Machine Learning
Elforjani, M., & Shanbr, S. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2767551 · Cited by 233
A new hybrid method for the prediction of the remaining useful life of a lithium-ion battery
Chang, Y., Fang, H., & Zhang, Y. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.09.106 · Cited by 232
Anomaly Detection and Fault Prognosis for Bearings
Jin, X., Sun, Y., Que, Z., Wang, Y., & Chow, T. W. S. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2570398 · Cited by 227
Estimating Remaining Useful Life With Three-Source Variability in Degradation Modeling
Si, X.-S., Wang, W., Hu, C.-H., & Zhou, D.-H. (2014) · IEEE Transactions on Reliability · doi:10.1109/tr.2014.2299151 · Cited by 224
Li, N., Lei, Y., Yan, T., Li, N., & Han, T. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2838078 · Cited by 222
Zhang, H., Miao, Q., Zhang, X., & Liu, Z. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.12.036 · Cited by 218
Soualhi, A., Razik, H., Clerc, G., & Doan, D. D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2274415 · Cited by 213
A Hybrid Prognostics Technique for Rolling Element Bearings Using Adaptive Predictive Models
Ahmad, W., Khan, S. A., & Kim, J.-M. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733487 · Cited by 212
Ensemble of data-driven prognostic algorithms for robust prediction of remaining useful life
Hu, C., Youn, B. D., & Wang, P. (2011) · 2011 IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2011.6024361 · Cited by 205
A comparative analysis of distributed MPC techniques applied to the HD-MPC four-tank benchmark
Alvarado, I., Limon, D., Muñoz de la Peña, D., Maestre, J. M., Ridao, M. A., Scheu, H., Marquardt, W., Negenborn, R. R., De Schutter, B., Valencia, F., et al. (2011) · Journal of Process Control · doi:10.1016/j.jprocont.2011.03.003 · Cited by 202
Data-driven hybrid remaining useful life estimation approach for spacecraft lithium-ion battery
Song, Y., Liu, D., Yang, C., & Peng, Y. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.06.045 · Cited by 196
Wu, J., Su, Y., Cheng, Y., Shao, X., Deng, C., & Liu, C. (2018) · Applied Soft Computing · doi:10.1016/j.asoc.2018.03.043 · Cited by 195
Cui, L., Wang, X., Xu, Y., Jiang, H., & Zhou, J. (2018) · Measurement · doi:10.1016/j.measurement.2018.12.028 · Cited by 195
Remaining useful life estimation for proton exchange membrane fuel cells using a hybrid method
Liu, H., Chen, J., Hissel, D., & Su, H. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.023 · Cited by 193
A data-model-fusion prognostic framework for dynamic system state forecasting
Liu, J., Wang, W., Ma, F., Yang, Y. B., & Yang, C. S. (2012) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2012.02.015 · Cited by 190
Remaining Useful Life Prediction of Rolling Bearings Using an Enhanced Particle Filter
Qian, Y., & Yan, R. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2427891 · Cited by 188
Lithium-ion batteries health prognosis considering aging conditions
El Mejdoubi, A., Chaoui, H., Gualous, H., Van Den Bossche, P., Omar, N., & Van Mierlo, J. (2019) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2018.2873247 · Cited by 186
Bressel, M., Hilairet, M., Hissel, D., & Ould Bouamama, B. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519328 · Cited by 182
Shehab El Din, M., Hussein, A. A., & Abdel-Hafez, M. F. (2018) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2018.2802043 · Cited by 179
Capacity Fade Estimation in Electric Vehicle Li-Ion Batteries Using Artificial Neural Networks
Hussein, A. A. (2015) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2014.2365152 · Cited by 176
Liu, X., Wu, J., Zhang, C., & Chen, Z. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.07.107 · Cited by 176
Review of adaptive systems for lithium batteries State-of-Charge and State-of-Health estimation
Watrin, N., Blunier, B., & Miraoui, A. (2012) · IEEE Transportation Electrification Conference and Expo · doi:10.1109/itec.2012.6243437 · Cited by 174
Intelligent condition-based prediction of machinery reliability
Heng, A., Tan, A. C. C., Mathew, J., Montgomery, N., Banjevic, D., & Jardine, A. K. S. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.12.006 · Cited by 173
State-of-life prognosis and diagnosis of lithium-ion batteries by data-driven particle filters
Cadini, F., Sbarufatti, C., Cancelliere, F., & Giglio, M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.10.095 · Cited by 173
Artificial neural networks in spectrum fatigue life prediction of composite materials
Vassilopoulos, A. P., Georgopoulos, E. F., & Dionysopoulos, V. (2006) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2006.03.004 · Cited by 172
El Mejdoubi, A., Oukaour, A., Chaoui, H., Gualous, H., Sabor, J., & Slamani, Y. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2509916 · Cited by 170
Estimation and forecasting of machine health condition using ARMA/GARCH model
Pham, H. T., & Yang, B.-S. (2010) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.08.004 · Cited by 164
Dusmez, S., Duran, H., & Akin, B. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2518127 · Cited by 164
Data driven prognostics using a Kalman filter ensemble of neural network models
Peel, L. (2008) · 2008 International Conference on Prognostics and Health Management · doi:10.1109/phm.2008.4711423 · Cited by 163
Online Tool Wear Monitoring Via Hidden Semi-Markov Model With Dependent Durations
Zhu, K., & Liu, T. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2723943 · Cited by 162
Cheng, F., Qu, L., & Qiao, W. (2018) · IEEE Transactions on Sustainable Energy · doi:10.1109/tste.2017.2719626 · Cited by 161
Kang, M., Kim, J., Wills, L. M., & Kim, J.-M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2460242 · Cited by 148
Particle Learning Framework for Estimating the Remaining Useful Life of Lithium-Ion Batteries
Liu, Z., Sun, G., Bu, S., Han, J., Tang, X., & PECHT, M. G. (2016) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2016.2622838 · Cited by 145
Remaining Useful Life Prediction of Lithium-Ion Battery Based on Gauss–Hermite Particle Filter
Ma, Y., Chen, Y., Zhou, X., & Chen, H. (2018) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2018.2819965 · Cited by 145
Xian, W., Long, B., Li, M., & Wang, H. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2013.2276473 · Cited by 144
Razavi‐Far, R., Hallaji, E., Farajzadeh-Zanjani, M., Saif, M., Kia, S. H., Henao, H., & Capolino, G. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2873546 · Cited by 143
Self-citationReconstruction based fault prognosis for continuous processes
Li, G., Qin, S. J., Ji, Y., et al. (2010) · Control Engineering Practice · doi:10.1016/j.conengprac.2010.05.012 · Cited by 140
Chen, Z., Li, Y., Xia, T., & Pan, E. (2017) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2017.09.002 · Cited by 138
Prediction of Machine Health Condition Using Neuro-Fuzzy and Bayesian Algorithms
Chen, C., Zhang, B., & Vachtsevanos, G. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2169182 · Cited by 136
Zhang, Y., Xiong, R., He, H., & PECHT, M. G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.12.041 · Cited by 136
Prognostics and Health Management of Industrial Equipment
Zio, E. (2012) · IGI Global eBooks · doi:10.4018/978-1-4666-2095-7.ch017 · Cited by 131
Wang, F., & Mamo, T. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.073 · Cited by 131
Risk Measures for Particle-Filtering-Based State-of-Charge Prognosis in Lithium-Ion Batteries
Orchard, M. E., Koch, P. A. H., Zhang, B., & Tang, L. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2224079 · Cited by 127
Self-citationAn Integrated Class-Imbalanced Learning Scheme for Diagnosing Bearing Defects in Induction Motors
Razavi‐Far, R., Farajzadeh-Zanjani, M., & Saif, M. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2755064 · Cited by 126
Self-citationRemaining useful life estimation in aeronautics: Combining data-driven and Kalman filtering
Baptista, M. L., Henriques, E. M. P., de Medeiros, I. P., Malere, J. P., Nascimento, C. L., & Prendinger, H. (2018) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2018.01.017 · Cited by 122
Kumar, A., Chinnam, R. B., & Tseng, F. (2018) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.05.017 · Cited by 121
Pola, D. A., Navarrete, H. F., Orchard, M. E., Rabie, R. S., Cerda, M. A., Olivares, B. E., Silva, J. F., Espinoza, P. A., & Perez, A. (2015) · IEEE Transactions on Reliability · doi:10.1109/tr.2014.2385069 · Cited by 118
Self-citationA Kalman Filter-Based Ensemble Approach With Application to Turbine Creep Prognostics
Baraldi, P., Mangili, F., & Zio, E. (2012) · IEEE Transactions on Reliability · doi:10.1109/tr.2012.2221037 · Cited by 117
Battery cell state-of-charge estimation using linear parameter varying system techniques
Hu, Y., & Yurkovich, S. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.058 · Cited by 116
Cheng, F., Qu, L., Qiao, W., & Hao, L. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2866057 · Cited by 114
Zhang, D., Baraldi, P., Cadet, C., Steiner, N. Y., Bérenguer, C., & Zio, E. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.01.060 · Cited by 114
Online Estimation of State of Charge in Li-Ion Batteries Using Impulse Response Concept
Ranjbar, A. H., Banaei, A., Khoobroo, A., & Fahimi, B. (2011) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2169818 · Cited by 111
Ran, L., Wu, J., Haiying, W., & Li, G. (2010) · IEEE Conference on Industrial Electronics and Applications (ICIEA) · doi:10.1109/iciea.2010.5516984 · Cited by 109
Ahwiadi, M., & Wang, W. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2853900 · Cited by 107
Li-ion battery parameter estimation for state of charge
Tang, X., Mao, X., Lin, J., & Koch, B. J. (2011) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.1109/acc.2011.5990963 · Cited by 107
Liu, Q., Dong, M., Lv, W., Geng, X., & Li, Y. (2015) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.03.029 · Cited by 106
Song, C., Liu, K., & Zhang, X. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2715180 · Cited by 106
Brownian motion with adaptive drift for remaining useful life prediction: Revisited
Wang, D., & Tsui, K. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.07.015 · Cited by 106
Yu, J. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2444237 · Cited by 98
Wavelets-based approach for online Fuel Cells Remaining Useful lifetime Prediction
Ibrahim, M., Steiner, N. Y., Jemeï, S., & Hissel, D. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2547358 · Cited by 94
A State-Space-Based Prognostic Model for Hidden and Age-Dependent Nonlinear Degradation Process
Feng, L., Wang, H., Si, X., & Zou, H. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2012.2227960 · Cited by 93
Orchard, M. E., & Vachtsevanos, G. (2007) · 2006 14th Mediterranean Conference on Control and Automation · doi:10.1109/med.2007.4433871 · Cited by 93
Self-citationZhou, D., Zhang, K., Ravey, A., Gao, F., & Miraoui, A. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2524438 · Cited by 92
Neuro-fuzzy Based Condition Prediction of Bearing Health
Zhao, F., Chen, J., Guo, L., & Li, X. (2009) · Journal of Vibration and Control · doi:10.1177/1077546309102665 · Cited by 90
Son, J., Zhou, S., Sankavaram, C., Du, X., & Zhang, Y. (2016) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2016.02.006 · Cited by 89
A Data-Driven Approach for Bearing Fault Prognostics
Jin, X., Que, Z., Sun, Y., Guo, Y., & Qiao, W. (2019) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2019.2907666 · Cited by 88
Prognostic Health-Management System Development for Electromechanical Actuators
Balaban, E., Saxena, A., Narasimhan, S., Roychoudhury, I., Koopmans, M. T., Ott, C., & Goebel, K. (2015) · Journal of Aerospace Information Systems · doi:10.2514/1.i010171 · Cited by 87
Computationally Efficient, Real-Time, and Embeddable Prognostic Techniques for Power Electronics
Alghassi, A., Perinpanayagam, S., Samie, M., & Sreenuch, T. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2360662 · Cited by 82
Wang, Z., Hu, C., & Fan, H. (2017) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2017.2666199 · Cited by 81
Model-Based Virtual Thermal Sensors for Lithium-Ion Battery in EV Applications
Xiao, Y. Z. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2386793 · Cited by 80
A Nonlinear Prognostic Model for Degrading Systems With Three-Source Variability
Zheng, J., Si, X., Hu, C., Zhang, Z., & Jiang, W. (2016) · IEEE Transactions on Reliability · doi:10.1109/tr.2015.2513044 · Cited by 78
An integrated imputation-prediction scheme for prognostics of battery data with missing observations
Razavi‐Far, R., Chakrabarti, S., Saif, M., & Zio, E. (2018) · Expert Systems with Applications · doi:10.1016/j.eswa.2018.08.033 · Cited by 75
Self-citationWang, Z., Hu, C., Si, X., & Zio, E. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.08.016 · Cited by 72
Remaining Useful Life Prediction for Degradation Processes With Long-Range Dependence
Zhang, H., Chen, M., Xi, X., & Zhou, D. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2720752 · Cited by 71
Liu, X., Song, P., Yang, C., et al. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2733469 · Cited by 70
Diagnosis and Prognosis of Degradation Process via Hidden Semi-Markov Model
Liu, T., Zhu, K., & Zeng, L. (2018) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2018.2823320 · Cited by 70
Lebesgue-Sampling-Based Diagnosis and Prognosis for Lithium-Ion Batteries
Yan, W., Zhang, B., Wang, X., Dou, W., & Wang, J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2494529 · Cited by 68
Zhang, Z., Si, X., Hu, C., & PECHT, M. G. (2017) · IEEE Transactions on Reliability · doi:10.1109/tr.2017.2742298 · Cited by 68
Two novel mixed effects models for prognostics of rolling element bearings
Wang, D., & Tsui, K. (2017) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2017.06.004 · Cited by 67
Liu, J., Wang, W., & Ma, F. (2011) · Smart Materials and Structures · doi:10.1088/0964-1726/20/7/075021 · Cited by 66
Connected Vehicle Diagnostics and Prognostics, Concept, and Initial Practice
Zhang, Y., Gantt, G. W., Rychlinski, M. J., et al. (2009) · IEEE Transactions on Reliability · doi:10.1109/tr.2009.2020484 · Cited by 62
Evaluation and Comparison of Mixed Effects Model Based Prognosis for Hard Failure
Son, J., Zhou, Q., Zhou, S., Mao, X., & Salman, M. A. (2013) · IEEE Transactions on Reliability · doi:10.1109/tr.2013.2259205 · Cited by 61
Acuña-Ureta, D. E., & Orchard, M. E. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.029 · Cited by 61
Self-citationLaredo, D., Chen, Z., Schütze, O., & Sun, J. (2019) · Neural Networks · doi:10.1016/j.neunet.2019.04.016 · Cited by 60
Remaining useful life estimation of Lithium-ion batteries based on thermal dynamics
Zhang, D., Dey, S., Perez, H. E., & Moura, S. J. (2017) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc.2017.7963575 · Cited by 57
Corbetta, M., Sbarufatti, C., Manes, A., & Giglio, M. (2014) · IEEE Transactions on Reliability · doi:10.1109/tr.2014.2366759 · Cited by 52
Loukopoulos, P., Zolkiewski, G., Bennett, I. J., Sampath, S., Pilidis, P., Li, X., & Mba, D. (2018) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2018.09.033 · Cited by 52
Tang, D., Cao, J., & Yu, J. (2018) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2018.08.015 · Cited by 47
Muetze, A., & Strangas, E. G. (2016) · IEEE Industry Applications Magazine · doi:10.1109/mias.2015.2459117 · Cited by 45
A multi-sensor approach to remaining useful life estimation for a slurry pump
Tse, Y. L., Cholette, M. E., & Tse, P. W.-T. (2019) · Measurement · doi:10.1016/j.measurement.2019.02.079 · Cited by 45
EMA remaining useful life prediction with weighted bagging GPR algorithm
Zhang, Y., Liu, D., Yu, J., Peng, Y., & Peng, X. (2017) · Microelectronics Reliability · doi:10.1016/j.microrel.2017.03.021 · Cited by 44
Nguyen, D. N., Dieulle, L., & Grall, A. (2015) · Mathematical Problems in Engineering · doi:10.1155/2015/356916 · Cited by 42
Chang, M., Kang, M., & PECHT, M. G. (2017) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2677301 · Cited by 40
Razavi‐Far, R., Farajzadeh-Zanjani, M., Chakrabarti, S., & Saif, M. (2016) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2016.7542870 · Cited by 39
Self-citationYan, W., Zhang, B., Dou, W., Liu, D., & Peng, Y. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2017.2666202 · Cited by 38
Cannarile, F., Baraldi, P., & Zio, E. (2018) · Fuzzy Sets and Systems · doi:10.1016/j.fss.2018.10.008 · Cited by 36
Lyapunov-based state of charge diagnosis and health prognosis for lithium-ion batteries
Wei, J., Dong, G., & Chen, Z. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.024 · Cited by 35
Kang, M., Kim, J., Jeong, I.-K., Kim, J.-M., & PECHT, M. G. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574986 · Cited by 30
Guan, X., Liu, Y., Jha, R., Saxena, A., Celaya, J. ́. R., & Geobel, K. (2011) · International Journal of Prognostics and Health Management · doi:10.36001/ijphm.2011.v2i1.1342 · Cited by 29
HYGP-MSAM based model for slewing bearing residual useful life prediction
Ding, P., Wang, H., Bao, W., & Hong, R. (2019) · Measurement · doi:10.1016/j.measurement.2019.04.039 · Cited by 29
A Data-Driven Approach for Bearing Fault Prognostics
Jin, X., Que, Z., Sun, Y., Guo, Y., & Qiao, W. (2018) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.2018.8544586 · Cited by 28
Shen, F., Xu, J., Sun, C., Chen, X., & Yan, R. (2019) · Measurement · doi:10.1016/j.measurement.2019.04.074 · Cited by 28
Guo, R., & Sui, J. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2910919 · Cited by 28
Zhang, Z., Hu, C., Si, X., Zhang, J., & Zheng, J. (2016) · Journal of the Franklin Institute · doi:10.1016/j.jfranklin.2016.06.039 · Cited by 27
Pugalenthi, K., & Raghavan, N. (2018) · Microelectronics Reliability · doi:10.1016/j.microrel.2018.08.007 · Cited by 27
Extreme Learning Machine Based Prognostics of Battery Life
Razavi‐Far, R., Chakrabarti, S., Saif, M., Zio, E., & Palade, V. (2018) · International Journal of Artificial Intelligence Tools · doi:10.1142/s0218213018500367 · Cited by 25
Self-citationState-Space Modeling and Observer Design of Li-Ion Batteries Using Takagi–Sugeno Fuzzy System
Samadi, M. F., & Saif, M. (2016) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2016.2549270 · Cited by 23
Self-citationMrugalska, B. (2018) · ISA Transactions · doi:10.1016/j.isatra.2018.07.010 · Cited by 23
Diagnostics in Lithium-Ion Batteries: Challenging Issues and Recent Achievements
Alavi, S. M. M., Samadi, M. F., & Saif, M. (2012) · Springer eBooks · doi:10.1007/978-3-642-34471-8_22 · Cited by 21
Self-citationMulti-step-ahead prediction techniques for Lithium-ion batteries condition prognosis
Razavi‐Far, R., Chakrabarti, S., & Saif, M. (2016) · Conference proceedings/Conference proceedings - IEEE International Conference on Systems, Man, and Cybernetics · doi:10.1109/smc.2016.7844969 · Cited by 20
Self-citationYang, C., Lou, Q., Liu, J., Yang, Y.-B., & Cheng, Q. (2017) · Applied Intelligence · doi:10.1007/s10489-017-1083-0 · Cited by 17
A Symbolic Regression Based Residual Useful Life Model for Slewing Bearings
Ding, P., Qian, Q., Wang, H., & Yao, J. (2019) · IEEE Access · doi:10.1109/access.2019.2919663 · Cited by 17
Peng, X., Zhang, C., Yang, Y., & Zhou, Y. H. (2016) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2016.7542844 · Cited by 16
Ding, P., Wang, H., Dai, Y. F., Chen, J., Zhang, H., & Sun, F. (2019) · Experimental Techniques · doi:10.1007/s40799-019-00308-0 · Cited by 16
Integrated Battery Management System
Samadi, M. F., & Saif, M. (2015) · Springer eBooks · doi:10.1007/978-3-319-15898-3_11 · Cited by 14
Self-citationA Novel Time Series-Histogram of Features (TS-HoF) Method for Prognostic Applications
Lim, P., Goh, C.-K., & Tan, K. C. (2018) · IEEE Transactions on Emerging Topics in Computational Intelligence · doi:10.1109/tetci.2018.2822836 · Cited by 14
State of charge and state of health estimation of lithium battery using dual Kalman filter method
Erlangga, G., Perwira, A., & Widyotriatmo, A. (2018) · doi:10.1109/icsigsys.2018.8372765 · Cited by 14
Discovering the hidden health states in bearing vibration signals for fault prognosis
Singleton, R. K., Strangas, E. G., & Aviyente, S. (2014) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2014.7049008 · Cited by 12
Prognosis of degradation through a dynamic estimation of Remaining Useful Life
Laayouj, N., Jamouli, H., & Hail, M. E. (2016) · International Conference on Systems and Control (ICSC) · doi:10.1109/icosc.2016.7507064 · Cited by 2
Cited by
Li, H., Zhang, Z., Li, T., & Si, X. (2024) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2024.111120 · Cited by 374
Convolutional Neural Networks for Flexible Payload Management in VHTS Systems
Ortiz-Gomez, F. G., Tarchi, D., Martínez, R., Vanelli-Coralli, A., Salas-Natera, M. A., & Landeros-Ayala, S. (2021) · IEEE Systems Journal · doi:10.1109/jsyst.2020.3020038 · Cited by 26
Metadata
- Authors
- Kordestani, M., Saif, M., Orchard, M. E., Razavi-Far, R., & Khorasani, K.
- Venue
- IEEE Transactions on Reliability
- Published
- 2021-06
- Volume
- 70
- Issue
- 2
- Pages
- 728-748
- ISSN
- 0018-9529 (ISSN-L)
- 1558-1721
- OpenAlex
- W2973942754
- Cited by
- 305
- References
- 175
- FWCI
- 41.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.