A Single-Phase Integrated Onboard Battery Charger Using Propulsion System for Plug-in Electric Vehicles
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
Plug-in electric vehicles (PEVs) are equipped with onboard level-1 or level-2 chargers for home overnight or office daytime charging. In addition, off-board chargers can provide fast charging for traveling long distances. However, off-board high-power chargers are bulky, expensive, and require comprehensive evolution of charging infrastructures. An integrated onboard charger capable of fast charging of PEVs will combine the benefits of both the conventional onboard and off-board chargers, without additional weight, volume, and cost. In this paper, an innovative single-phase integrated charger, using the PEV propulsion machine and its traction converter, is introduced. The charger topology is capable of power factor correction and battery voltage/current regulation without any bulky add-on components. Ac machine windings are utilized as mutually coupled inductors, to construct a two-channel interleaved boost converter. The circuit analyses of the proposed technology, based on a permanent magnet synchronous machine (PMSM), are discussed in details. Experimental results of a 3-kW proof-of-concept prototype are carried out using a 220-Vrm s, 3-phase, 8-pole PMSM. A nearly unity power factor and 3.96% total harmonic distortion of input ac current are acquired with a maximum efficiency of 93.1%.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496 · cited 2×
“PMSMs are suitable candidates as PEV propulsion machines owing to their superiorities in terms of high power density, high efficiency and light weight/volume [11].”
BackgroundElectric, Hybrid, and Fuel-Cell Vehicles: Architectures and Modeling
Chan, C. C., Bouscayrol, A., & Chen, K. (2010) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2033605 · Cited by 792 · cited 1×
“CONVENTIONAL level-1 and level-2 onboard chargers are utilized to charge plug-in electric vehicle (PEV) batteries using single-phase power outlets [1], [2].”
BackgroundElectrical Motor Drivelines in Commercial All-Electric Vehicles: A Review
de Santiago, J., Bernhoff, H., Ekergård, B., Eriksson, S., Ferhatovic, S., Waters, R., & Leijon, M. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2011.2177873 · Cited by 669 · cited 2×
“In a typical three-phase-ac machine propulsion system, a bidirectional three-phase traction converter enables battery power flow to the ac machine during propulsion and battery charging during regenerative braking [10].”
BackgroundMethodKhaligh, A., & Dusmez, S. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2213104 · Cited by 630 · cited 2×
“However, due to their charging power limitations, it might take between 4 to 20 hours to fully charge a PEV battery [3], [4].”
BackgroundSelf-citationAdvanced Integrated Bidirectional AC/DC and DC/DC Converter for Plug-In Hybrid Electric Vehicles
Lee, Y.-J., Khaligh, A., & Emadi, A. (2009) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2009.2028070 · Cited by 476 · cited 2×
“To reduce the size, weight and cost of onboard chargers, integrated chargers are proposed and studied in the literature [14]–[20].”
BackgroundSelf-citationEvaluation and Efficiency Comparison of Front End AC-DC Plug-in Hybrid Charger Topologies
Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2166413 · Cited by 296
An Automotive Onboard 3.3-kW Battery Charger for PHEV Application
Gautam, D. S., Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2012) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2012.2210259 · Cited by 274 · cited 1×
“CONVENTIONAL level-1 and level-2 onboard chargers are utilized to charge plug-in electric vehicle (PEV) batteries using single-phase power outlets [1], [2].”
BackgroundAn Integral Battery Charger With Power Factor Correction for Electric Scooter
Pellegrino, G., Armando, E., & Guglielmi, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2009.2033187 · Cited by 267
Bi-directional charging topologies for plug-in hybrid electric vehicles
Erb, D. C., Onar, O. C., & Khaligh, A. (2010) · 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2010.5433520 · Cited by 193
Self-citationReview of charging power levels and infrastructure for plug-in electric and hybrid vehicles
Yilmaz, M., & Krein, P. T. (2012) · 2012 IEEE International Electric Vehicle Conference · doi:10.1109/ievc.2012.6183208 · Cited by 193 · cited 1×
“In many electric vehicles (such as Prius Hybrid, Camry hybrid, Fusion hybrid and Nissan Leaf EV), there is a bidirectional dc-dc converter between the threephase traction converter and the battery to step up the battery voltage when the battery voltage is lower than its rated voltage due to low SoC (state of charge) […”
Background55-kW Variable 3X DC-DC Converter for Plug-in Hybrid Electric Vehicles
Qian, W., Cha, H., Peng, F. Z., & Tolbert, L. M. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2165559 · Cited by 190 · cited 1×
“In many electric vehicles (such as Prius Hybrid, Camry hybrid, Fusion hybrid and Nissan Leaf EV), there is a bidirectional dc-dc converter between the threephase traction converter and the battery to step up the battery voltage when the battery voltage is lower than its rated voltage due to low SoC (state of charge) […”
BackgroundOnboard Integrated Battery Charger for EVs Using an Asymmetrical Nine-Phase Machine
Subotic, I., Bodo, N., Levi, E., & Jones, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2345341 · Cited by 174
A review of single-phase PFC topologies based on the boost converter
Figueiredo, J. P. M., Tofoli, F. L., & Silva, B. L. A. (2010) · 2010 9th IEEE/IAS International Conference on Industry Applications - INDUSCON 2010 · doi:10.1109/induscon.2010.5740015 · Cited by 174 · cited 1×
“Typically, a charger consists of two stages: an acdc stage for rectification of grid ac voltage and power factor correction (PFC) and a dc-dc stage for battery current and voltage regulation [7]–[9].”
BackgroundDiab, M. S., Elserougi, A. A., Abdel-Khalik, A. S., Massoud, A. M., & Ahmed, S. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2555295 · Cited by 159
An integral battery charger for four-wheel drive electric vehicle
Sul, S.-K., & Lee, S.-J. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464524 · Cited by 158 · cited 1×
“To reduce the size, weight and cost of onboard chargers, integrated chargers are proposed and studied in the literature [14]–[20].”
BackgroundModeling and Control of Three-Phase PMSMs Under Open-Phase Fault
Gaeta, A., Scelba, G., & Consoli, A. (2013) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2012.2228614 · Cited by 151 · cited 19×
“In this work, the integration theory is focused on a PMSM based propulsion system.”
BackgroundMethodInfluentialAn integrated fast battery charger for Electric Vehicle
Lacroix, S., Laboure, E., & Hilairet, M. (2010) · 2010 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2010.5729063 · Cited by 150 · cited 1×
“An integrated topology is proposed in [25], but it has high possibility of propulsion machine rotation during charging.”
BackgroundIsolated Chargers for EVs Incorporating Six-Phase Machines
Subotic, I., Bodo, N., Levi, E., Jones, M., & Levi, V. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2412516 · Cited by 147 · cited 1×
“Specially designed machines are needed in topologies proposed by [18]–[21].”
BackgroundAn automotive on-board 3.3 kW battery charger for PHEV application
Gautam, D., Musavi, F., Edington, M., Eberle, W., & Dunford, W. G. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6043192 · Cited by 132 · cited 1×
“CONVENTIONAL level-1 and level-2 onboard chargers are utilized to charge plug-in electric vehicle (PEV) batteries using single-phase power outlets [1], [2].”
BackgroundAn Integrated Driving/Charging Switched Reluctance Motor Drive Using Three-Phase Power Module
Chang, H.-C., & Liaw, C.-M. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2051938 · Cited by 129 · cited 3×
“Specially designed machines are needed in topologies proposed by [18]–[21].”
BackgroundShi, C., Khaligh, A., & Wang, H. (2016) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2016.2553650 · Cited by 84 · cited 1×
“Typically, a charger consists of two stages: an acdc stage for rectification of grid ac voltage and power factor correction (PFC) and a dc-dc stage for battery current and voltage regulation [7]–[9].”
Self-citationVafaie, M. H., Dehkordi, B. M., Moallem, P., & Kiyoumarsi, A. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2577591 · Cited by 84 · cited 17×
“In this work, the integration theory is focused on a PMSM based propulsion system.”
MethodInfluentialWoo, D.-G., Joo, D.-M., & Lee, B. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2015.2396200 · Cited by 72 · cited 2×
“The integrated chargers in [21]–[23] require access to inaccessible points of machine windings.”
BackgroundLuo, Y., Su, Y.-P., Huang, Y., Lee, Y.-H., Chen, K., & Hsu, W. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2012.2188842 · Cited by 59 · cited 1×
“This small unbalanced current does not affect the feasibility of the proposed integrated charger, and current balancing techniques can be applied to reduce the unbalancing currents [31], [32].”
BackgroundChen, H., Wang, X., & Khaligh, A. (2011) · 2011 IEEE Vehicle Power and Propulsion Conference · doi:10.1109/vppc.2011.6042980 · Cited by 53
Self-citationA PWM SRT DC/DC Converter for 6.6-kW EV Onboard Charger
Lee, B.-K., Kim, J.-P., Kim, S.-G., & Lee, J.-Y. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2480384 · Cited by 52 · cited 1×
“However, due to their charging power limitations, it might take between 4 to 20 hours to fully charge a PEV battery [3], [4].”
BackgroundChen, H., Lu, C.-Y., & Huang, L. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2498135 · Cited by 51 · cited 1×
“This small unbalanced current does not affect the feasibility of the proposed integrated charger, and current balancing techniques can be applied to reduce the unbalancing currents [31], [32].”
BackgroundDusmez, S., & Khaligh, A. (2012) · 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2012.6166191 · Cited by 43 · cited 1×
“Researchers have studied integrated non-isolated single-stage chargers that combine ac-dc rectifiers and the propulsion machine’s dc-dc bidirectional converters [14]–[16].”
BackgroundSelf-citationPower Split Control Strategy for an EV Powertrain With Two Propulsion Machines
Yavaşoğlu, H. A., Shen, J., Shi, C. L., Gökaşan, M., & Khaligh, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2504406 · Cited by 42 · cited 1×
“In addition, PEVs utilize high-power three-phase-ac machines such as induction machines (IM) or permanent magnet synchronous machines (PMSM) for electric propulsion (Tesla Model S 310-kW IM, Toyota Rav4 EV 115-kW IM, Nissan Leaf 80-kW PMSM, Chevy Volt 111-kW PMSM, among others) [10]–[12].”
MethodSelf-citationIntegrated battery charger with power factor correction for electric‐propulsion systems
Liu, T., Chen, Y., Yi, P., & Chen, J.-L. (2015) · IET Electric Power Applications · doi:10.1049/iet-epa.2014.0168 · Cited by 41 · cited 1×
“The winding/ traction converter rearrangement are necessary in [21], [24].”
Background
Research works printed but not linked: 2
- ohm, 2000, Dynamic model of PM Synchronous Motors
- 10.1109/TIA.2016.2553650 · DOI · Paper page
Cited by
Global Trends in High-Power On-Board Chargers for Electric Vehicles
Khaligh, A., & D'Antonio, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2897050 · Cited by 652
“be found in [100]–[101].”
Self-citationA Review of Bidirectional On-Board Chargers for Electric Vehicles
Yuan, J., Dorn-Gomba, L., Callegaro, A. D., Reimers, J., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3069448 · Cited by 390
“Torque production can be eliminated by restricting it to high frequency components with a zero average [146], phase transposition in the charging mode [148] or through flux cancellation with split winding machines [154].”
BackgroundElectric Vehicles Charging Technology Review and Optimal Size Estimation
Brenna, M., Foiadelli, F., Leone, C., & Longo, M. (2020) · Journal of Electrical Engineering & Technology · doi:10.1007/s42835-020-00547-x · Cited by 298
A Comprehensive Review on Solar Powered Electric Vehicle Charging System
Khan, S., Ahmad, A., Ahmad, F., Shafaati Shemami, M., Saad Alam, M., & Khateeb, S. (2018) · Smart Science · doi:10.1080/23080477.2017.1419054 · Cited by 284
Sun, X., Shi, Z., Lei, G., Guo, Y., & Zhu, J. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2939794 · Cited by 231
Metadata
- Authors
- Shi, C., Tang, Y., & Khaligh, A.
- Affiliations
- University of Maryland, College Park (US)
- Venue
- IEEE Transactions on Vehicular Technology
- Published
- 2017-12
- Volume
- 66
- Issue
- 12
- Pages
- 10899-10910
- ISSN
- 0018-9545 (ISSN-L)
- 1939-9359
- OpenAlex
- W2738428153
- Cited by
- 187
- References
- 30
- Citations by year
- 2026: 8 · 2025: 27 · 2024: 22 · 2023: 30 · 2022: 23 · 2021: 26 · 2020: 18 · 2019: 21 · 2018: 11 · 2017: 1
- FWCI
- 5.80
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- IEEE Transactions on Vehicular Technology (publishedVersion)
- Funders
- National Science Foundation (1507546)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced DC-DC Converters
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Wireless Power Transfer Systems
- Physical Sciences › Engineering › Automotive Engineering › Electric and Hybrid Vehicle Technologies
- Keywords
- plug-in electric vehicles, fast charging, propulsion system integration, traction converter, interleaved boost converter, power factor correction, battery voltage regulation, permanent magnet synchronous motor, mutual inductance, total harmonic distortion, charging efficiency
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.