The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
Additive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Abstract
Additive manufacturing ( AM ) is a technology which has the potential not only to change the way of conventional industrial manufacturing processes, adding material instead of subtracting, but also to create entirely new production and business strategies. Since about three decades, AM technologies have been used to fabricate prototypes or models mostly from polymeric or metallic materials. Recently, products have been introduced into the market that cannot be produced in another way than additively. Ceramic materials are, however, not easy to process by AM technologies, as their processing requirements (in terms of feedstock and/or sintering) are very challenging. On the other hand, it can be expected that AM technologies, once successful, will have an extraordinary impact on the industrial production of ceramic components and, moreover, will open for ceramics new uses and new markets.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cellular Solids: Structure and Properties
Gibson, L. J., & Ashby, M. F. (1997) · Cambridge University Press eBooks · doi:10.1017/cbo9781139878326 · Cited by 5,512
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
Colombo, P., Mera, G., Riedel, R., & Sorarù, G. D. (2010) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2010.03876.x · Cited by 1,887
Self-citationDirect Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Binding mechanisms in selective laser sintering and selective laser melting
Kruth, J., Mercelis, P., Van Vaerenbergh, J., Froyen, L., & Rombouts, M. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573365 · Cited by 1,383
Additive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Rapid prototyping & manufacturing— Fundamentals of stereolithography
(1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 850
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Freeform fabrication of ceramics via stereolithography
Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815
Building components for an outpost on the lunar soil by means of a novel 3D printing technology
Cesaretti, G., Dini, E., De Kestelier, X., Colla, V., & Pambaguian, L. (2014) · Acta Astronautica · doi:10.1016/j.actaastro.2013.07.034 · Cited by 806
The Design of Scaffolds for Use in Tissue Engineering. Part II. Rapid Prototyping Techniques
Yang, S., Leong, K.-F., Du, Z., & Chua, C.-K. (2002) · Tissue Engineering · doi:10.1089/107632702753503009 · Cited by 729
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Smay, J. E., Cesarano, J., & Lewis, J. A. (2002) · Langmuir · doi:10.1021/la0257135 · Cited by 700
(2013) · Medical Entomology and Zoology · Cited by 690
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures
Chu, T.-M. G., Orton, D. G., Hollister, S. J., Feinberg, S. E., & Halloran, J. W. (2002) · Biomaterials · doi:10.1016/s0142-9612(01)00243-5 · Cited by 554
Vaezi, M., Chianrabutra, S., Mellor, B., & Yang, S. (2013) · Virtual and Physical Prototyping · doi:10.1080/17452759.2013.778175 · Cited by 548
Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Schieker, M., & Seitz, H. (2005) · Journal of Materials Science: Materials in Medicine · doi:10.1007/s10856-005-4716-5 · Cited by 499
Development of controlled porosity polymer-ceramic composite scaffolds via fused deposition modeling
Kalita, S. J., Bose, S., Hosick, H. L., & Bandyopadhyay, A. (2003) · Materials Science and Engineering: C · doi:10.1016/s0928-4931(03)00052-3 · Cited by 488
Novel Powder‐Processing Methods for Advanced Ceramics
Sigmund, W. M., Bell, N. S., & Bergström, L. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01432.x · Cited by 477
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Additive manufacturing of ceramics: A review
Deckers, J. P., Vleugels, J., & Kruth, J. (2014) · Lirias (KU Leuven) · doi:10.4416/jcst2014-00032 · Cited by 429
Fielding, G. A., Bandyopadhyay, A., & Bose, S. (2012) · Dental Materials · doi:10.1016/j.dental.2011.09.010 · Cited by 401
Additive manufacturing of ZrO2‐Al2O3 ceramic components by selective laser melting
Wilkes, J., Hagedorn, Y., Meiners, W., & Wissenbach, K. (2013) · Rapid Prototyping Journal · doi:10.1108/13552541311292736 · Cited by 398
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.06.030 · Cited by 366
Inkjet printing ceramics: From drops to solid
Derby, B. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.01.016 · Cited by 365
Influence of porosity and pore size on the compressive strength of porous hydroxyapatite ceramic
Liu, D.-M. (1997) · Ceramics International · doi:10.1016/s0272-8842(96)00009-0 · Cited by 325
3D printing of bone substitute implants using calcium phosphate and bioactive glasses
Bergmann, C., Lindner, M., Zhang, W., Koczur, K., Kirsten, A., Telle, R., & Fischer, H. (2010) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2010.04.037 · Cited by 311
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Park, S. A., Lee, S. H., & Kim, W. D. (2011) · Bioprocess and Biosystems Engineering · doi:10.1007/s00449-010-0499-2 · Cited by 284
Stereolithography of structural complex ceramic parts
Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 274
The direct metal deposition of H13 tool steel for 3-D components
Mazumder, J., Choi, J., Nagarathnam, K., Koch, J. A., & Hetzner, D. W. (1997) · JOM · doi:10.1007/bf02914687 · Cited by 265
Compositionally graded metals: A new frontier of additive manufacturing
Hofmann, D. C., Kolodziejska, J., Roberts, S., Otis, R., Dillon, R. P., Suh, J.-O., Liu, Z.-K., & Borgonia, J.-P. (2014) · Journal of Materials Research · doi:10.1557/jmr.2014.208 · Cited by 255
Bioinspired Strong and Highly Porous Glass Scaffolds
Fu, Q., Saiz, E., & Tomsia, A. P. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201002030 · Cited by 252
The direct metal deposition of H13 tool steel for 3-D components
Mazumder, J., Choi, J. R., Nagarathnam, K., Koch, J. A., & Hetzner, D. W. (1997) · JOM · doi:10.1007/bf02914385 · Cited by 225
Three-Dimensional Printing Techniques
Demirak, O., Gokyer, S., Ergene, E., & Yilgor, P. (2025) · Biological and Medical Physics, Biomedical Engineering · doi:10.1007/978-3-031-90966-5_3 · Cited by 225
Direct write assembly of calcium phosphate scaffolds using a water-based hydrogel
Franco, J., Hunger, P., Launey, M. E., Tomsia, A. P., & Saiz, E. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2009.06.031 · Cited by 217
Pham, T. A., Kim, D. ‐., Lim, T. ‐., Park, S. ‐., Yang, D., & Lee, K. ‐. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600009 · Cited by 214
Castilho, M., Moseke, C., Ewald, A., Gbureck, U., Groll, J., Pires, I., Teßmar, J., & Vorndran, E. (2014) · Biofabrication · doi:10.1088/1758-5082/6/1/015006 · Cited by 211
Robocasting of 45S5 bioactive glass scaffolds for bone tissue engineering
Eqtesadi, S., Motealleh, A., Miranda, P., Pajares, A., Lemos, A., & Ferreira, J. M. F. (2014) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2013.08.003 · Cited by 183
Simpson, R. L., Wiria, F. E., Amis, A. A., Chua, C. K., Leong, K. F., Hansen, U. N., Chandrasekaran, M., & Lee, M. W. (2008) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.30839 · Cited by 181
Model of the selective laser sintering of bisphenol-A polycarbonate
Nelson, J. C., Xue, S., Barlow, J. W., Beaman, J. J., Marcus, H. L., & Bourell, D. L. (1993) · Industrial & Engineering Chemistry Research · doi:10.1021/ie00022a014 · Cited by 177
Rapid casting solutions: a review
Chhabra, M., & Singh, R. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111156469 · Cited by 163
Kolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F., & Velez, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/2/025004 · Cited by 161
A novel system for fused deposition of advanced multiple ceramics
Jafari, M. A., Han, W., Mohammadi, F., Safari, A., Danforth, S. C., & Langrana, N. A. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337047 · Cited by 154
Pore size and pore volume effects on alumina and TCP ceramic scaffolds
Bose, S., Darsell, J. T., Kintner, M., et al. (2002) · Materials Science and Engineering C · doi:10.1016/s0928-4931(02)00129-7 · Cited by 146
Interfacial characteristics of composites fabricated by laminated object manufacturing
Klosterman, D., Chartoff, R. P., Graves, G., Osborne, N., & Priore, B. E. (1998) · Composites Part A Applied Science and Manufacturing · doi:10.1016/s1359-835x(98)00088-8 · Cited by 142
Suwanprateeb, J., Sanngam, R., Suvannapruk, W., & Panyathanmaporn, T. (2009) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-009-3697-1 · Cited by 139
Bian, W., Li, D., Lian, Q., Li, X., Zhang, W., Wang, K., & Jin, Z. (2012) · Rapid Prototyping Journal · doi:10.1108/13552541211193511 · Cited by 130
Processing of Piezocomposites by Fused Deposition Technique
Bandyopadhyay, A. K., Panda, R. K., Janas, V. F., Agarwala, M. K., Danforth, S. C., & Safari, A. (1997) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1997.tb02993.x · Cited by 123
Producing metal parts with selective laser sintering/hot isostatic pressing
Das, S., Wohlert, M., Beaman, J. J., & Bourell, D. L. (1998) · JOM · doi:10.1007/s11837-998-0299-1 · Cited by 120
Shaping of ceramic parts by selective laser melting of powder bed
Juste, E., Petit, F., Lardot, V., & Cambier, F. (2014) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2014.127 · Cited by 120
Klammert, U., Reuther, T., Jahn, C., et al. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.08.019 · Cited by 118
Chumnanklang, R., Panyathanmaporn, T., Sitthiseripratip, K., & Suwanprateeb, J. (2007) · Materials Science and Engineering C · doi:10.1016/j.msec.2006.11.004 · Cited by 114
Direct inkjet printing of Si3N4: Characterization of ink, green bodies and microstructure
Cappi, B., Özkol, E., Ebert, J., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.03.004 · Cited by 112
Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering
Butscher, A., Bohner, M., Doebelin, N., Galea, L., Loeffel, O., & Müller, R. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.10.009 · Cited by 106
Slurry‐Based Additive Manufacturing of Ceramics
Mühler, T., Gomes, C. M., Heinrich, J. G., & Günster, J. (2013) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12113 · Cited by 104
Self-citationFracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31272 · Cited by 102
Dellinger, J. G., Cesarano, J., & Jamison, R. D. (2007) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31072 · Cited by 101
Three‐Dimensional Printing of Complex‐Shaped Alumina/Glass Composites
Zhang, W., Melcher, R., Travitzky, N. A., Bordia, R. K., & Greil, P. (2009) · Advanced Engineering Materials · doi:10.1002/adem.200900213 · Cited by 92
Control of the viscous behavior of highly concentrated mullite suspensions for robocasting
Stuecker, J. N., Cesarano, J., & Hirschfeld, D. A. (2003) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(03)00586-7 · Cited by 89
Customization of Load‐Bearing Hydroxyapatite Lattice Scaffolds
Cesarano, J., Dellinger, J. G., Saavedra, M. P., Gill, D., Jamison, R. D., Grosser, B., Sinn-Hanlon, J., & Goldwasser, M. S. (2005) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2005.02026.x · Cited by 87
A novel aqueous ceramic suspension for ceramic stereolithography
Zhou, W., Li, D., & Wang, H. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011011686 · Cited by 80
Detsch, R., Uhl, F. E., Deisinger, U., & Ziegler, G. (2007) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-007-3297-x · Cited by 71
Özkol, E., Ebert, J., Uibel, K., Wätjen, A. M., & Telle, R. (2008) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2008.06.020 · Cited by 66
Biocompatibility of ceramic scaffolds for bone replacement made by 3D printing
Leukers, B., Gülkan, H., Irsen, S. H., Milz, S., Tille, C., Seitz, H., & Schieker, M. (2005) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.200500968 · Cited by 64
Solid freeform fabrication of ceramics
Cawley, J. D. (1999) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(99)00055-8 · Cited by 61
Directed Colloidal Assembly of Linear and Annular Lead Zirconate Titanate Arrays
Smay, J. E., Cesarano, J., Tuttle, B. A., et al. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.00293.x · Cited by 61
A multi-component powder dispensing system for three dimensional functional gradients
Yang, S., & Evans, J. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.03.047 · Cited by 54
Laminated object manufacturing of LZSA glass‐ceramics
Gomes, C. M., Travitzky, N. A., Greil, P., Acchar, W., Birol, H., de Oliveira, A. P. N., & Hotza, D. (2011) · Rapid Prototyping Journal · doi:10.1108/13552541111184152 · Cited by 43
Self-citationTowards Patient-Oriented Diabetes Care: Results from Two KORA Surveys in Southern Germany
Schunk, M. V., Stark, R. G., Reitmeir, P., Meisinger, C., & Holle, R. (2015) · Journal of Diabetes Research · doi:10.1155/2015/368570 · Cited by 22
Fabrication of Millimeter‐Wave Electromagnetic Bandgap Crystals Using Microwave Dielectric Powders
Lu, X., Lee, Y., Yang, S., Hao, Y., Ubic, R., Evans, J., & Parini, C. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02907.x · Cited by 19
Keramik und Multi-Material 3D-Druck
Kollenberg, W. (2014) · Keramische Zeitschrift · doi:10.1007/bf03400217 · Cited by 12
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Architected Cellular Materials
Schaedler, T. A., & Carter, W. B. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031624 · Cited by 786
Designing Biomaterials for 3D Printing
Guvendiren, M., Molde, J., Soares, R. M. D., & Kohn, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00121 · Cited by 732
Overview on Additive Manufacturing Technologies
Calignano, F., Manfredi, D., Ambrosio, E. P., Biamino, S., Lombardi, M., Atzeni, E., Salmi, A., Minetola, P., Iuliano, L., & Fino, P. (2017) · Proceedings of the IEEE · doi:10.1109/jproc.2016.2625098 · Cited by 640
Metadata
- Authors
- Zocca, A., Colombo, P., Gomes, C. M., & Günster, J.
- Venue
- Journal of the American Ceramic Society
- Publisher
- Wiley
- Published
- 2015-07
- Volume
- 98
- Issue
- 7
- Pages
- 1983-2001
- ISSN
- 0002-7820 (ISSN-L)
- 1551-2916
- OpenAlex
- W2110695739
- Cited by
- 1,115
- References
- 76
- FWCI
- 46.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.