The DOI matches its Crossref record; 94 of the 94 references it cites were found in a registry or an index.
Thermoplastic Starch: A Possible Biodegradable Food Packaging Material—A Review
Abstract
In the past years, research has been focused on biodegradable materials to replace petroleum based plastics for food packaging application. For this purpose, biopolymers are considered the most promising material because of their biodegradable nature and long shelf life properties like resistance to chemical or enzymatic reactions. Starch is renewable, cheap, and abundantly available biopolymer. However, the intermolecular forces and hydrogen bonds in starch resist it to be processed as a thermoplastic material. To overcome this issue, different plasticizers are used to have deformable thermoplastic material called thermoplastic starches (TPSs). A plasticizer enhances the flexibility, the process stability of starch below the degradation temperature. Plasticizer lowers the glass transition temperature (Tg). TPS is very promising among the biobased materials available for the production of biodegradable plastic. TPS have some limitations; bad mechanical properties and water sensitivity. Starch absorbs water under higher relative humidity. This work will provide an outline about the research that has been done on TPS during last 15 years as biodegradable food packaging material. Practical Applications: The basic role of food packaging material is to make it cost effective that satisfies industry requirements and consumer desires, and provide protection from three major classes of external influences: chemical, biological, and physical, e.g., such as exposure to gases, barrier to microorganisms, or from mechanical damage, respectively. These external influences may damage the quality of the food and shelf life. For this motive, starch has become the most preferred option among the verified classes of synthetic and natural materials. Retrogradation of starch chains in presence of water make it impossible to be use as packaging material. To overcome this issue, Starch has been plasticized with water and low molecular weight additive that can interact with its backbone by hydrogen bonding to produce thermoplastic starch (TPS). The objective of this review is to summarize numerous studies related to interaction of plasticizers and starch for the production of biodegradable TPS food packaging materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Starch: Chemistry and Technology
(1984) · Elsevier eBooks · doi:10.1016/c2009-0-02983-3 · Cited by 3,261
Plastics Recycling: Challenges and Opportunities
Hopewell, J., Dvorak, R., & Kosior, E. (2009) · Philosophical Transactions of the Royal Society B: Biological Sciences · doi:10.1098/rstb.2008.0311 · Cited by 3,201
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Starch granules: structure and biosynthesis
Buléon, A., Colonna, P., Planchot, V., & Ball, S. (1998) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(98)00040-3 · Cited by 2,091
Food Packaging—Roles, Materials, and Environmental Issues
Marsh, K., & Bugusu, B. (2007) · Journal of Food Science · doi:10.1111/j.1750-3841.2007.00301.x · Cited by 1,919
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Fu, Y., & Kao, W. J. (2010) · Expert Opinion on Drug Delivery · doi:10.1517/17425241003602259 · Cited by 1,305
Modified Starches Properties and Uses
Wurzburg, O. B. (1986) · Cited by 1,010
Structure of the starch granule. I. Swelling and solubility patterns of various starches.
Leach, H. W. (1959) · Cereal Chemistry · Cited by 985
RAHMAN, M., & BRAZEL, C. (2004) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.10.001 · Cited by 883
Progress in bio-based plastics and plasticizing modifications
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12555f · Cited by 831
Thermal processing of starch-based polymers
Liu, H., Xie, F., Yu, L., Chen, L., & Li, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.07.001 · Cited by 817
Guo, X., Winkler, C. A., Li, J., Guan, L., Tang, M., Liao, J., Deng, H., de Thé, G., Zeng, Y., & O’Brien, S. J. (2014) · BioMed Research International · doi:10.1155/2014/434072 · Cited by 667
Application of bioplastics for food packaging
Peelman, N., Ragaert, P., De Meulenaer, B., Adons, D., Peeters, R., Cardon, L., Van Impe, F., & Devlieghere, F. (2013) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2013.06.003 · Cited by 615
Compatibilization in bio-based and biodegradable polymer blends
Imre, B., & Pukánszky, B. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.019 · Cited by 613
Tang, X., & Alavi, S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.01.030 · Cited by 593
Physicochemical and bioactivity of cross-linked chitosan–PVA film for food packaging applications
Tripathi, S., Mehrotra, G. K., & Dutta, P. K. (2009) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2009.07.006 · Cited by 501
Structural and mechanistic aspects of the thermal degradation of poly(vinyl chloride)
Starnes, W. H. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00063-1 · Cited by 470
The terminology and methodology associated with basic starch phenomena
Atwell, W. A., Hood, L. F., Lineback, D. R., Varriano‐Marston, E., & Zobel, H. F. (1988) · Cereal Foods World · Cited by 468
Plasticizer effect on mechanical properties of β-lactoglobulin films
Sothornvit, R., & Krochta, J. M. (2001) · Journal of Food Engineering · doi:10.1016/s0260-8774(00)00237-5 · Cited by 434
Lipid Addition to Improve Barrier Properties of Edible Starch‐based Films and Coatings
García, M. A., Martino, M. N., & Zaritzky, N. (2000) · Journal of Food Science · doi:10.1111/j.1365-2621.2000.tb09397.x · Cited by 404
Effects of various plasticizers on mechanical and water vapor barrier properties of gelatin films
Cao, N., Yang, X., & Fu, Y. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.07.017 · Cited by 367
Production and applications of biobased packaging materials for the food industry
Weber, C. J., Haugaard, V., Festersen, R., & Bertelsen, G. (2002) · Food Additives & Contaminants · doi:10.1080/02652030110087483 · Cited by 356
Sustainability of biobased and biodegradable plastics
Sudesh, K., & Iwata, T. (2008) · CLEAN – Soil, Air, Water · doi:10.1002/clen.200700183 · Cited by 354
Mechanical, Physical, and Barrier Properties of Poly(Lactide) Films
Auras, R. A., Harte, B., Selke, S., & Hernandez, R. (2003) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087903039702 · Cited by 346
(2023) · Elsevier eBooks · doi:10.1016/c2022-0-02210-8 · Cited by 335
Ghaderi, M., Mousavi, M., Yousefi, H., & Labbafi, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.013 · Cited by 310
(1940) · Nature · doi:10.1038/146823a0 · Cited by 306
Slavutsky, A. M., & Bertuzzi, M. A. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.03.049 · Cited by 305
Soy protein – Poly (lactic acid) bilayer films as biodegradable material for active food packaging
González, A., & Alvarez Igarzabal, C. I. (2013) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2013.03.010 · Cited by 299
Madival, S., Auras, R., Singh, S. P., & Narayan, R. (2009) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2009.03.015 · Cited by 298
PHB packaging for the storage of food products
Bucci, D. Z., Tavares, L. B. B., & Sell, I. (2005) · Polymer Testing · doi:10.1016/j.polymertesting.2005.02.008 · Cited by 280
A relationship between the amylose and lipid contents of starches from diploid cereals
Morrison, W. R., Milligan, T. P., & Azudin, M. N. (1984) · Journal of Cereal Science · doi:10.1016/s0733-5210(84)80014-4 · Cited by 270
Chapter 5 Starch Gelatinization
Ratnayake, W. S., & Jackson, D. S. (2008) · Advances in Food and Nutrition Research · doi:10.1016/s1043-4526(08)00405-1 · Cited by 266
Pérez-Gago, M. B., & Krochta, J. M. (2001) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf000615f · Cited by 263
Urea and ethanolamine as a mixed plasticizer for thermoplastic starch
Ma, X. F., Yu, J. G., & Wan, J. J. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.11.042 · Cited by 239
Donhowe, I. G., & Fennema, O. R. (1993) · Journal of Food Processing and Preservation · doi:10.1111/j.1745-4549.1993.tb00729.x · Cited by 231
Effect of fatty acids and ‘Brazilian elemi’ on composite films based on gelatin
Bertan, L. C., Tanada-Palmu, P. S., Siani, A. C., & Grosso, C. R. F. (2005) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2004.04.017 · Cited by 230
Influence of formamide and water on the properties of thermoplastic starch/poly(lactic acid) blends
Wang, N., Yu, J., Chang, P. R., & Ma, X. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.025 · Cited by 221
Properties of Starch Blends with Biodegradable Polymers
Wang, X.-L., Yang, K.-K., & Wang, Y.-Z. (2003) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-120023911 · Cited by 218
Zhong, K., Lin, Z.-T., Zheng, X.-L., Jiang, G.-B., Fang, Y.-S., Mao, X.-Y., & Liao, Z.-W. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.10.030 · Cited by 216
Thermorheological and mechanical properties of cellulose reinforced PLA bio-composites
Awal, A., Rana, M., & Sain, M. (2015) · Mechanics of Materials · doi:10.1016/j.mechmat.2014.09.009 · Cited by 211
Polymer film packaging for food: An environmental assessment
Barlow, C. Y., & Morgan, D. C. (2013) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2013.07.003 · Cited by 210
Jyothi, A. N., Moorthy, S. N., & Rajasekharan, K. N. (2006) · Starch - Stärke · doi:10.1002/star.200500468 · Cited by 207
Barrier and surface properties of chitosan-coated greaseproof paper
Kjellgren, H., Gällstedt, M., Engström, G., & Järnström, L. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.02.005 · Cited by 199
Screening Potato Starch for Novel Properties Using Differential Scanning Calorimetry
KIM, Y. S., WIESENBORN, D. P., ORR, P. H., & GRANT, L. A. (1995) · Journal of Food Science · doi:10.1111/j.1365-2621.1995.tb06292.x · Cited by 198
Nouri, L., & Mohammadi Nafchi, A. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.02.044 · Cited by 192
Effects of plasticizers on the properties of oat starch films
Galdeano, M. C., Mali, S., Grossmann, M. V. E., Yamashita, F., & García, M. A. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.09.034 · Cited by 177
Carbinatto, F. M., de Castro, A. D., Evangelista, R. C., & Cury, B. S. F. (2014) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2013.12.002 · Cited by 176
Soulaka, A. B., & Morrison, W. R. (1985) · Journal of the Science of Food and Agriculture · doi:10.1002/jsfa.2740360811 · Cited by 175
Polylactic acid/polypropylene polyblend fibers for better resistance to degradation
Reddy, N., Nama, D., & Yang, Y. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.09.005 · Cited by 173
Food packaging bags based on thermoplastic corn starch reinforced with talc nanoparticles
López, O. V., Castillo, L. A., García, M. A., Villar, M. A., & Barbosa, S. E. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2014.04.021 · Cited by 173
Orliac, O., Rouilly, A., Silvestre, F., & Rigal, L. (2003) · Industrial Crops and Products · doi:10.1016/s0926-6690(03)00015-3 · Cited by 172
Processing and characterization of thermoplastic starch/polyethylene blends
St-Pierre, N., Favis, B. D., Ramsay, B., Ramsay, J. A., & Verhoogt, H. (1997) · Polymer · doi:10.1016/s0032-3861(97)81176-7 · Cited by 168
Starch: Major Sources, Properties and Applications as Thermoplastic Materials
Carvalho, A. J. F. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00015-6 · Cited by 164
B., A., Suin, S., & Khatua, B. B. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.04.024 · Cited by 163
Structure, chemistry, and function of the rice grain and its fractions
Juliano, B. O. (1992) · Cereal Foods World · Cited by 159
García-Subirats, I., Vargas, Í., Mogollón‐Pérez, A., Paepe, P. D., da Silva, M. R. F., Unger, J., & Vázquez, M. L. (2014) · Social Science & Medicine · doi:10.1016/j.socscimed.2014.01.054 · Cited by 154
Characterization of Phosphorus in Starch by 31P - Nuclear Magnetic Resonance Spectroscopy
Lim, S.-T., Kasemsuwan, T., & Jane, J. (1994) · Cereal Chemistry · Cited by 154
Study of the properties of biocomposites. Part I. Cassava starch-green coir fibers from Brazil
Lomelí-Ramírez, M. G., Satyanarayana, K. G., Iwakiri, S., de Muñiz, G. I. B., Tanobe, V. O. D. A., & Flores‐Sahagun, T. H. S. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.07.002 · Cited by 152
Chitosan Acetate Bandage as a Topical Antimicrobial Dressing for Infected Burns
Dai, T., Tegos, G. P., Burkatovskaya, M., Castaño, A. P., & Hamblin, M. R. (2008) · Antimicrobial Agents and Chemotherapy · doi:10.1128/aac.00760-08 · Cited by 133
Urea and formamide as a mixed plasticizer for thermoplastic starch
Ma, X., Jiugao, Y., & Jin, F. (2004) · Polymer International · doi:10.1002/pi.1580 · Cited by 128
Tao, J., Song, C., Cao, M., Hu, D., Liu, L., Liu, N., & Wang, S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.01.017 · Cited by 116
Formamide as the plasticizer for thermoplastic starch
Ma, X., & Yu, J. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20628 · Cited by 115
Sabetzadeh, M., Bagheri, R., & Masoomi, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.038 · Cited by 108
Influence of storage conditions on starch/PVA films containing cellulose nanofibers
Panaitescu, D. M., Frone, A. N., Ghiurea, M., & Chiulan, I. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.028 · Cited by 97
Liu, H., Yu, L. F., Simon, G. P., Dean, K., & Chen, L. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.02.010 · Cited by 97
Rosa, D. D. S., Guedes, C. G. F., & de Carvalho, C. L. (2007) · Journal of Materials Science · doi:10.1007/s10853-006-1049-9 · Cited by 95
Stloukal, P., Kalendová, A., Mattausch, H., Laske, S., Holzer, C., & Koutný, M. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.10.015 · Cited by 93
Polystyrene/thermoplastic starch blends with different plasticizers
Schlemmer, D., de Oliveira, E. R., & Sales, M. J. A. (2007) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-006-7776-y · Cited by 87
Zuo, Y. F., Gu, J., Qiao, Z., Tan, H., Cao, J., & Zhang, Y. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.08.038 · Cited by 87
Ortenzi, M. A., Basilissi, L., Farina, H., Silvestro, G. D., Piergiovanni, L., & Mascheroni, E. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.03.006 · Cited by 80
Yoon, S., Chough, S., & Park, H. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23303 · Cited by 78
Impact of polylactate and poly(hydroxybutyrate) on food quality
Haugaard, V. K., Danielsen, B., & Bertelsen, G. (2003) · European Food Research and Technology · doi:10.1007/s00217-002-0651-6 · Cited by 76
Experimental Analysis and Computer Simulation of Starch‐Water Interactions during Phase Transition
Wang, S. S., Chiang, W., Zhao, B., Zheng, X., & Kim, I. (1991) · Journal of Food Science · doi:10.1111/j.1365-2621.1991.tb07990.x · Cited by 76
WOLFROM, M. L. (1955) · Archives of Biochemistry and Biophysics · doi:10.1016/0003-9861(55)90160-0 · Cited by 74
Rheological properties of thermoplastic starch studied by multipass rheometer
Tajuddin, S., Xie, F., Nicholson, T. M., Liu, P., & Halley, P. J. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.08.073 · Cited by 64
Sunny, M. C., Ramesh, P., & George, K. E. (2004) · Journal of Elastomers & Plastics · doi:10.1177/0095244304038016 · Cited by 61
Zhang, S., Feng, X., Zhu, S., Huan, Q., Han, K., Ma, Y., & Yu, M. (2013) · Materials Letters · doi:10.1016/j.matlet.2012.12.019 · Cited by 54
Effect of Morphology on the Biodegradation of Thermoplastic Starch in LDPE/TPS Blends
Tena-Salcido, C.-S., Rodríguez‐González, F., Méndez-Hernández, M. L., & Contreras‐Esquivel, J. C. (2008) · Polymer Bulletin · doi:10.1007/s00289-008-0903-0 · Cited by 54
Molecular and Morphological Aspects of Annealing-Induced Stabilization of Starch Crystallites
Gomand, S. V., Lamberts, L., Gommes, C., Visser, R. G. F., Delcour, J. A., & Goderis, B. (2012) · Biomacromolecules · doi:10.1021/bm3000748 · Cited by 52
Hu, P., Zhao, P., Jin, Y., & Chen, Z. (2014) · Solar Energy · doi:10.1016/j.solener.2014.01.018 · Cited by 52
Synthesis, characterization and properties of radiation-induced Starch/(EG-co-MAA) hydrogels
El‐Mohdy, H. L. A., Hegazy, E. A., El-Nesr, E. M., & El-Wahab, M. A. (2012) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2012.04.022 · Cited by 52
Protective multilayer packaging for long-term implantable medical devices
Hogg, A., Uhl, S., Feuvrier, F., Girardet, Y., Graf, B., Aellen, T., Keppner, H., Tardy, Y., & Burger, J. (2014) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2014.02.070 · Cited by 50
Rheological and mechanical properties of polypropylene/thermoplastic starch blend
Kaseem, M., Hamad, K., & Deri, F. (2011) · Polymer Bulletin · doi:10.1007/s00289-011-0611-z · Cited by 42
Orts, W. J., Nobes, G. A. R., Glenn, G. M., Gray, G. M., Imam, S., & Chiou, B. (2007) · Polymers for Advanced Technologies · doi:10.1002/pat.869 · Cited by 41
Fisk, I. D., Linforth, R., Trophardy, G., & Gray, D. A. (2013) · Food Research International · doi:10.1016/j.foodres.2013.08.024 · Cited by 37
Soy proteins as environmentally friendly sizing agents to replace poly(vinyl alcohol)
Chen, L., Reddy, N., & Yang, Y. (2013) · Environmental Science and Pollution Research · doi:10.1007/s11356-013-1601-5 · Cited by 33
van der Harst, E., & Potting, J. (2013) · Environmental Modelling & Software · doi:10.1016/j.envsoft.2013.09.014 · Cited by 32
Liu, F., Meng, Y., & Run, M. (2013) · International Journal of Polymer Science · doi:10.1155/2013/156289 · Cited by 25
Plastic packages for personal care products: evaluation of light barrier properties
Coltro, L., & Borghetti, J. (2007) · Polímeros · doi:10.1590/s0104-14282007000100013 · Cited by 17
Mathur, V., & Sharma, K. (2013) · Advances in Nanoparticles · doi:10.4236/anp.2013.23029 · Cited by 13
Scaffolds Reinforced by Fibers or Tubes for Tissue Repair
Li, X., Dunne, N., Li, X., & Aifantis, K. E. (2014) · BioMed Research International · doi:10.1155/2014/501275 · Cited by 6
Cited by
Environmental performance of bio-based and biodegradable plastics: the road ahead
Lambert, S., & Wagner, M. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00149e · Cited by 838
Jian, J., Xiangbin, Z., & Xianbo, H. (2020) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2020.01.001 · Cited by 625
Bio-based and biodegradable polymers - State-of-the-art, challenges and emerging trends
RameshKumar, S., Shaiju, P., O'Connor, K. E., & P, R. B. (2020) · Current Opinion in Green and Sustainable Chemistry · doi:10.1016/j.cogsc.2019.12.005 · Cited by 479
Zimmermann, L., Dombrowski, A., Völker, C., & Wagner, M. (2020) · Environment International · doi:10.1016/j.envint.2020.106066 · Cited by 443
Qin, Y., Liu, Y., Zhang, X., & Liu, J. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105410 · Cited by 428
Metadata
- Authors
- Khan, B., Bilal Khan Niazi, M., Samin, G., & Jahan, Z.
- Venue
- Journal of Food Process Engineering
- Publisher
- Wiley
- Published
- 2016-07-10
- Volume
- 40
- Issue
- 3
- ISSN
- 0145-8876 (ISSN-L)
- 1745-4530
- OpenAlex
- W2499902524
- Cited by
- 358
- References
- 94
- FWCI
- 5.39
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.