Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.

Computational Analysis of Coupled Blood-Wall Arterial LDL Transport

Stangeby, D. Kim, Ethier, C. Ross · 2002 · Journal of Biomechanical Engineering

Abstract

The transport of macromolecules, such as low density lipoproteins (LDLs), across the artery wall and their accumulation in the wall is a key step in atherogenesis. Our objective was to model fluid flow within both the lumen and wall of a constricted, axisymmetric tube simulating a stenosed artery, and to then use this flow pattern to study LDL mass transport from the blood to the artery wall. Coupled analysis of lumenal blood flow and transmural fluid flow was achieved through the solution of Brinkman’s model, which is an extension of the Navier-Stokes equations for porous media. This coupled approach offers advantages over traditional analyses of this problem, which have used possibly unrealistic boundary conditions at the blood-wall interface; instead, we prescribe a more natural pressure boundary condition at the adventitial vasa vasorum, and allow variations in wall permeability due to the occurrence of plaque. Numerical complications due to the convection dominated mass transport process (low LDL diffusivity) are handled by the streamline upwind/Petrov-Galerkin (SUPG) finite element method. This new fluid-plus-porous-wall method was implemented for conditions typical of LDL transport in a stenosed artery with a 75 percent area reduction (Peclet number=2×108). The results show an elevated LDL concentration at the downstream side of the stenosis. For the higher Darcian wall permeability thought to occur in regions containing atheromatous lesions, this leads to an increased transendothelial LDL flux downstream of the stenosis. Increased transmural filtration in such regions, when coupled with a concentration-dependent endothelial permeability to LDL, could be an important contributor to LDL infiltration into the arterial wall. Experimental work is needed to confirm these results.

Overview

Integrity signals

Registry

Crossref · 10.1115/1.1427041

Cites

64 of 64 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 5

  1. Stangeby, D. K., and Ethier, C. R., 2000, “Computational analysis of convection dominated transport in two media: arterial mass transport,” Proceedings, Conference on Mathematical Modeling and Scientific Computing.
  2. Ethier, C. R., Steinman, D. A., and Ojha, M., 1999, “Comparisons between computational hemodynamics, photochromic dye flow visualization and magnetic resonance velocimetry,” Haemodynamics of Arterial Organs. X. Y. Xu and M. W. Collins, eds., WIT Press, Southampton, pp. 131–183.
  3. Wada, S., and Karino, T., 1999, “Relationship between wall shear stress and surface concentration of lipoproteins calculated for a multiple bend of the human right coronary artery,” V. K. Goel et al., eds., Proceedings, 1999 Bioengineering Conference, BED Vol. 42, ASME Press, New York, pp. 735–736.
  4. Steinman, D. A., 1993, “Numerical Analysis of Flow in a 2-D Distensible Model of an End-to-Side Anastomosis,” Ph.D. thesis, University of Toronto.
  5. Fatouraec, N., Deng, X., De Champlain, A., and Guidoin, R., 1999, “Numerical simulation of lipid transport through arterial stenoses,” V. K. Goel et al., eds., Proceedings, 1999 Bioengineering Conference, BED Vol. 42, ASME Press, New York, pp. 733–734.

Cited by

See all 154

Metadata

Authors
Stangeby, D. K., & Ethier, C. R.
Affiliations
University of Toronto (CA)
Venue
Journal of Biomechanical Engineering
Published
2001-09-17
Volume
124
Issue
1
Pages
1-8
ISSN
  • 0148-0731 (ISSN-L)
  • 1528-8951
OpenAlex
W2064998967
Cited by
154
References
64
Citations by year
2026: 2 · 2025: 2 · 2024: 2 · 2023: 2 · 2022: 5 · 2021: 2 · 2020: 5 · 2019: 5 · 2018: 6 · 2017: 3 · 2016: 3 · 2015: 11 · 2014: 10 · 2013: 13 · 2012: 7
FWCI
0.96
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Biomechanical Engineering (publishedVersion)
  • PubMed (publishedVersion)
Funders
Natural Sciences and Engineering Research Council of Canada
Topics
  • Life Sciences › Immunology and Microbiology › Immunology › Atherosclerosis and Cardiovascular Diseases
  • Physical Sciences › Engineering › Computational Mechanics › Advanced Numerical Methods in Computational Mathematics
  • Health Sciences › Medicine › Cardiology and Cardiovascular Medicine › Coronary Interventions and Diagnostics
Keywords
arterial wall, atherogenesis, stenosed artery, Brinkman model, porous media flow, vasa vasorum, wall permeability, convection-dominated diffusion, atherosclerotic plaque
MeSH terms
Arteries, Arteriosclerosis, Biological Transport, Cell Membrane Permeability, Computer Simulation, Constriction, Pathologic, Endothelium, Vascular, Hemodynamics, Humans, Lipoproteins, LDL, Models, Cardiovascular, Oxygen, Pressure, Rheology, Sensitivity and Specificity, Porosity, Finite Element Analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.