The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Optimization of the Individual Stiffness and Damping Parameters in Multiple-Tuned-Mass-Damper Systems
Abstract
The characteristics of multiple tuned-mass-dampers (MTMDs) attached to a single-degree-of-freedom primary system have been examined by many researchers. Several papers have included some parameter optimization, all based on restrictive assumptions. In this paper, we propose an efficient numerical algorithm to directly optimize the stiffness and damping of each of the tuned-mass dampers (TMDs) in such a system. We formulate the parameter optimization as a decentralized H2 control problem where the block-diagonal feedback gain matrix is composed of the stiffness and damping coefficients of the TMDs. The gradient of the root-mean-square response with respect to the design parameters is evaluated explicitly, and the optimization can be carried out efficiently. The effects of the mass distribution, number of dampers, total mass ratio, and uncertainties in system parameters are studied. Numerical results indicate that the optimal designs have neither uniformly spaced tuning frequencies nor identical damping coefficients, and that optimization of the individual parameters in the MTMD system yields a substantial improvement in performance. We also find that the distribution of mass among the TMDs has little impact on the performance of the system provided that the stiffness and damping can be individually optimized.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yamaguchi, H., & Harnpornchai, N. (1993) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290220105 · Cited by 341
Dynamic characterization of multiple tuned mass dampers and some design formulas
Abé, M., & Fujino, Y. (1994) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290230802 · Cited by 329
Performance of Multiple Mass Dampers under Random Loading
Kareem, A., & Kline, S. (1995) · Journal of Structural Engineering · doi:10.1061/(asce)0733-9445(1995)121:2(348) · Cited by 306
Vibration Control Using Multiple Tuned Mass Dampers
Igusa, T., & Xu, K. (1994) · Journal of Sound and Vibration · doi:10.1006/jsvi.1994.1341 · Cited by 295
Li, C. (2002) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.128 · Cited by 189
Cited by
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review
Yang, F., Sedaghati, R., & Esmailzadeh, E. (2022) · Journal of Vibration and Control · doi:10.1177/1077546320984305 · Cited by 306
Distributed Mass Damper System for Integrating Structural and Environmental Controls in Buildings
Fu, T. S., & Johnson, E. A. (2011) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0000211 · Cited by 53
Hybrid active tuned mass dampers for structures under the ground acceleration
Li, C., & Cao, B. (2015) · Structural Control and Health Monitoring · doi:10.1002/stc.1716 · Cited by 49
On a nonlinear single-mass two-frequency pendulum tuned mass damper to reduce horizontal vibration
Viet, L. D., & Nghi, N. B. (2014) · Engineering Structures · doi:10.1016/j.engstruct.2014.09.038 · Cited by 49
Vibration control of buildings by using partial floor loads as multiple tuned mass dampers
Sakr, T. A. (2017) · HBRC Journal · doi:10.1016/j.hbrcj.2015.04.004 · Cited by 32
Active Control for a Distributed Mass Damper System
Fu, T. S., & Johnson, E. A. (2014) · Journal of Engineering Mechanics · doi:10.1061/(asce)em.1943-7889.0000650 · Cited by 16
Metadata
- Authors
- Zuo, L., & Nayfeh, S. A.
- Venue
- Journal of Vibration and Acoustics
- Publisher
- ASME International
- Published
- 2005-02-01
- Volume
- 127
- Issue
- 1
- Pages
- 77-83
- ISSN
- 0739-3717 (ISSN-L)
- 1048-9002
- 1528-8927
- OpenAlex
- W2044536043
- Cited by
- 180
- References
- 5
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.