Frequency Analysis of the Tuned Mass Damper
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
The damping properties of the viscous tuned mass damper are characterized by dynamic amplification analysis as well as identification of the locus of the complex natural frequencies. Optimal damping is identified by a combined analysis of the dynamic amplification of the motion of the structural mass as well as the relative motion of the damper mass. The resulting optimal damper parameter is about 15% higher than the classic value, and results in improved properties for the motion of the damper mass. The free vibration properties are characterized by analyzing the locus of the natural frequencies in the complex plane. It is demonstrated that for optimal frequency tuning the damping ratio of both vibration modes are equal and approximately half the damping ratio of the applied damper, when the damping is below a critical value corresponding to a bifurcation point. This limiting value corresponds to maximum modal damping and serves as an upper limit for damping to be applied in practice.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Optimum absorber parameters for various combinations of response and excitation parameters
Warburton, G. B. (1982) · Earthquake Engineering & Structural Dynamics · doi:10.1002/eqe.4290100304 · Cited by 1,043
Passive energy dissipation systems in structural engineering
Crewe, A. (1998) · Structural Safety · doi:10.1016/s0167-4730(97)00034-9 · Cited by 1,015
Passive Energy Dissipation Systems in Structural Engineering
Dargush, G. F., & Soong, T. T. (1997) · Medical Entomology and Zoology · Cited by 880
The Theory of the Dynamic Vibration Absorber
Ormondroyd, J., & Den Hartog, J. P. (1928) · Transactions of the American Society of Mechanical Engineers · doi:10.1115/1.4058553 · Cited by 779
Asami, T., Nishihara, O., & Baz, A. M. (2002) · Journal of Vibration and Acoustics · doi:10.1115/1.1456458 · Cited by 405
A Note on the Damped Vibration Absorber
Brock, J. E. (1946) · Journal of Applied Mechanics · doi:10.1115/1.4009588 · Cited by 356
Richards, K. L. (2017) · CRC Press eBooks · doi:10.1201/9781315367514-9 · Cited by 88
Cited by
Marian, L., & Giaralis, A. (2014) · Probabilistic Engineering Mechanics · doi:10.1016/j.probengmech.2014.03.007 · Cited by 828
“Further, a semi-empirical “optimum” design procedure has been established by Den Hartog [3] and Brock [4] to “tune” the damping and stiffness properties for an a priori specified mass of this spring-mass-damper attachment such that the peak displacement of harmonically excited undamped SDOF primary structures is minim…”
Research developments in vibration control of structures using passive tuned mass dampers
Elias, S., & Matsagar, V. (2017) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2017.09.015 · Cited by 556
“A frequency analysis of the TMD system as studied by Krenk (2005) , wherein it was demonstrated that he classic frequency tuning leads to equal damping ratio of the wo vibration modes of the combined system.”
MethodVibration suppression of structures using tuned mass damper technology: A state-of-the-art review
Yang, F., Sedaghati, R., & Esmailzadeh, E. (2022) · Journal of Vibration and Control · doi:10.1177/1077546320984305 · Cited by 306
“Krenk (2005) presented the frequency analysis of the TMD system to realize the effectiveness of the TMD system.”
BackgroundOffshore Wind Turbine Load Reduction Employing Optimal Passive Tuned Mass Damping Systems
Stewart, G., & Lackner, M. (2013) · IEEE Transactions on Control Systems Technology · doi:10.1109/tcst.2013.2260825 · Cited by 219
“Even for an idealized one-degree-of-freedom structure, the optimal tuning for the spring and damper is dictated by a complex function [18].”
BackgroundPassive non-linear targeted energy transfer and its applications to vibration absorption: A review
Lee, Y. S., Vakakis, A. F., Bergman, L. A., McFarland, D. M., Kerschen, G., Nucera, F., Tsakirtzis, S., & Panagopoulos, P. N. (2008) · Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics · doi:10.1243/14644193jmbd118 · Cited by 196
Metadata
- Authors
- Krenk, S.
- Affiliations
- Technical University of Denmark (DK)
- Corresponding author
- Krenk, Steen
- ORCID
- Krenk, Steen
- Venue
- Journal of Applied Mechanics
- Publisher
- ASME International
- Published
- 2005-05-15
- Volume
- 72
- Issue
- 6
- Pages
- 936-942
- ISSN
- 0021-8936 (ISSN-L)
- 1528-9036
- OpenAlex
- W1968064524
- Cited by
- 217
- References
- 7
- Citations by year
- 2026: 16 · 2025: 17 · 2024: 16 · 2023: 17 · 2022: 23 · 2021: 25 · 2020: 14 · 2019: 14 · 2018: 8 · 2017: 7 · 2016: 10 · 2015: 11 · 2014: 9 · 2013: 10 · 2012: 10
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Mechanics (publishedVersion)
- Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion)
- Topics
- Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
- Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
- Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
- Keywords
- tuned mass damper, viscous damping, optimal damping, dynamic amplification, complex natural frequencies, frequency tuning, bifurcation, modal damping, structural vibration control
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Frequency Analysis of the Tuned Mass Damper. https://app.cochat.ai/papers/10.1115/1.2062867
- The paper
- Krenk, S. (2005). Frequency Analysis of the Tuned Mass Damper. Journal of Applied Mechanics. https://doi.org/10.1115/1.2062867
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.