CoChat

Frequency Analysis of the Tuned Mass Damper

Krenk, Steen · 2005 · Journal of Applied Mechanics

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

The damping properties of the viscous tuned mass damper are characterized by dynamic amplification analysis as well as identification of the locus of the complex natural frequencies. Optimal damping is identified by a combined analysis of the dynamic amplification of the motion of the structural mass as well as the relative motion of the damper mass. The resulting optimal damper parameter is about 15% higher than the classic value, and results in improved properties for the motion of the damper mass. The free vibration properties are characterized by analyzing the locus of the natural frequencies in the complex plane. It is demonstrated that for optimal frequency tuning the damping ratio of both vibration modes are equal and approximately half the damping ratio of the applied damper, when the damping is below a critical value corresponding to a bifurcation point. This limiting value corresponds to maximum modal damping and serves as an upper limit for damping to be applied in practice.

Overview

Integrity signals

Registry

Crossref · 10.1115/1.2062867

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 7 references

Cited by

Items 201–241 of 241

Metadata

Authors
Krenk, S.
Affiliations
Technical University of Denmark (DK)
Corresponding author
Krenk, Steen
Venue
Journal of Applied Mechanics
Published
2005-05-15
Volume
72
Issue
6
Pages
936-942
ISSN
  • 0021-8936 (ISSN-L)
  • 1528-9036
OpenAlex
W1968064524
Cited by
217
References
7
Citations by year
2026: 16 · 2025: 17 · 2024: 16 · 2023: 17 · 2022: 23 · 2021: 25 · 2020: 14 · 2019: 14 · 2018: 8 · 2017: 7 · 2016: 10 · 2015: 11 · 2014: 9 · 2013: 10 · 2012: 10
FWCI
4.65
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Applied Mechanics (publishedVersion)
  • Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
  • Physical Sciences › Engineering › Mechanical Engineering › Vibration and Dynamic Analysis
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
Keywords
tuned mass damper, viscous damping, optimal damping, dynamic amplification, complex natural frequencies, frequency tuning, bifurcation, modal damping, structural vibration control

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.