A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties
Open accessThe DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index.
Abstract
An alternative concept of the relationship between morphological and elastic properties of trabecular bone is presented and applied to human tissue from several anatomical locations using a digital approach. The three-dimensional morphology of trabecular bone was assessed with a microcomputed tomography system and the method of directed secants as well as the star volume procedure were used to compute mean intercept length (MIL) and average bone length (ABL) of 4 mm cubic specimens. Assuming isotropic elastic properties for the trabecular tissue, the general elastic tensors of the bone specimens were determined using the homogenization method and the closest orthotropic tensors were calculated with an optimization algorithm. The assumption of orthotropy for trabecular bone was found to improve with specimen size and hold within 6.1 percent for a 4 mm cube size. A strong global relationship (r2 = 0.95) was obtained between fabric and the orthotropic elastic tensor with a minimal set of five constants. Mean intercept length and average bone length provided an equivalent power of prediction. These results support the hypothesis that the elastic properties of human trabecular bone from an arbitrary anatomical location can be estimated from an approximation of the anisotropic morphology and a prior knowledge of tissue properties.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [95]
Citations
Cites
Non-Homogeneous Media and Vibration Theory
(1980) · Lecture Notes in Physics · doi:10.1007/3-540-10000-8 · Cited by 3,637
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
The relationship between the structural and orthogonal compressive properties of trabecular bone
Goulet, R. W., Goldstein, S. A., Ciarelli, M. J., Kuhn, J. L., Brown, M. B., & Feldkamp, L. A. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90014-0 · Cited by 741
Self-citationPredicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Distribution of directional data and fabric tensors
Ken-Ichi, K. (1984) · International Journal of Engineering Science · doi:10.1016/0020-7225(84)90090-9 · Cited by 663
Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Choi, K., Kuhn, J. L., Ciarelli, M. J., & Goldstein, S. A. (1990) · Journal of Biomechanics · doi:10.1016/0021-9290(90)90003-l · Cited by 532
A comparison of homogenization and standard mechanics analyses for periodic porous composites
Hollister, S. J., & Kikuchi, N. (1992) · Computational Mechanics · doi:10.1007/bf00369853 · Cited by 509
Self-citation
Research works printed but not linked: 5
- Cowin, S. C., 1989, Bone Mechanics, CRC Press, Boca Raton, FL.
- Ko, C.-C., Douglas, W. H., and Cheng, Y.-S., 1995, “Intrinsic mechanical competence of cortical and trabecular bone measured by nanoindentation and microindentation probes,” Proc. Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 415–416.
- Meyer G. H. , 1867, “Die Architektur der Spongiosa,” Archiv fuer Anatomie, Physiologie und wissenschaftliche Medizin, Vol. 34, pp. 615–628.
- Shieh, S. J., Govind, S., Gudipaty, K., Subramanian, R., and Grimm, M. J., 1995, “High resolution ultrasonic measurement of the material properties of cortical and trabecular bone in the human vertebrae,” ASME Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 413–414.
- Zysset, P. K., Guo, X. E., Hoffler, C. E., and Goldstein, S. A., 1996, “Elastic modulus of human cortical and trabecular tissue lamellae,” Trans. 43rd Annual Meeting of the ORS, San Francisco, Vol. 2, pp. 798.
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
“Through advancements in imaging techniques and computational methods, it is now possible to create detailed anatomic site-specific finite element models of trabecular bone specimens (Kabel et al., 1999; Ulrich et al., 1999; Zysset et al., 1998) and whole bones (Keyak and Rossi, 2000; Lotz et al.”
MethodLin, C. Y., Kikuchi, N., & Hollister, S. J. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.09.029 · Cited by 384
Self-citationHeterogeneity of bone lamellar-level elastic moduli
Hoffler, C. E., Moore, K. E., Kozloff, K., Zysset, P. K., Brown, M. B., & Goldstein, S. A. (2000) · Bone · doi:10.1016/s8756-3282(00)00268-4 · Cited by 259
Self-citation
Metadata
- Authors
- Zysset, P. K., Goulet, R. W., & Hollister, S. J.
- Affiliations
- University of Michigan (US)
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 1998-10-01
- Volume
- 120
- Issue
- 5
- Pages
- 640-646
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2091033405
- Cited by
- 105
- References
- 30
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 3 · 2023: 5 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 1 · 2018: 2 · 2017: 6 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 3 · 2012: 2
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- National Institutes of Health (5r01ar034399-12, 5r01ar041349-04)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR34399, AR41349)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- trabecular bone, bone microarchitecture, elastic properties, homogenization, anisotropy, mean intercept length, fabric tensor, micro-computed tomography, specimen size effect
- MeSH terms
- Adult, Aged, Algorithms, Anthropometry, Bone and Bones, Cadaver, Elasticity, Female, Humans, Male, Middle Aged, Models, Biological, Numerical Analysis, Computer-Assisted, Predictive Value of Tests, Tensile Strength, Tomography, X-Ray Computed, Reproducibility of Results, Bias, Anisotropy, Finite Element Analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties. https://app.cochat.ai/papers/10.1115/1.2834756
- The paper
- Zysset, P. K., Goulet, R. W., & Hollister, S. J. (1998). A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.2834756
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.