A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties
Open accessThe DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index.
Abstract
An alternative concept of the relationship between morphological and elastic properties of trabecular bone is presented and applied to human tissue from several anatomical locations using a digital approach. The three-dimensional morphology of trabecular bone was assessed with a microcomputed tomography system and the method of directed secants as well as the star volume procedure were used to compute mean intercept length (MIL) and average bone length (ABL) of 4 mm cubic specimens. Assuming isotropic elastic properties for the trabecular tissue, the general elastic tensors of the bone specimens were determined using the homogenization method and the closest orthotropic tensors were calculated with an optimization algorithm. The assumption of orthotropy for trabecular bone was found to improve with specimen size and hold within 6.1 percent for a 4 mm cube size. A strong global relationship (r2 = 0.95) was obtained between fabric and the orthotropic elastic tensor with a minimal set of five constants. Mean intercept length and average bone length provided an equivalent power of prediction. These results support the hypothesis that the elastic properties of human trabecular bone from an arbitrary anatomical location can be estimated from an approximation of the anisotropic morphology and a prior knowledge of tissue properties.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [95]
Citations
Cites
Non-Homogeneous Media and Vibration Theory
(1980) · Lecture Notes in Physics · doi:10.1007/3-540-10000-8 · Cited by 3,637
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
The relationship between the structural and orthogonal compressive properties of trabecular bone
Goulet, R. W., Goldstein, S. A., Ciarelli, M. J., Kuhn, J. L., Brown, M. B., & Feldkamp, L. A. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90014-0 · Cited by 741
Self-citationPredicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Distribution of directional data and fabric tensors
Ken-Ichi, K. (1984) · International Journal of Engineering Science · doi:10.1016/0020-7225(84)90090-9 · Cited by 663
Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Choi, K., Kuhn, J. L., Ciarelli, M. J., & Goldstein, S. A. (1990) · Journal of Biomechanics · doi:10.1016/0021-9290(90)90003-l · Cited by 532
A comparison of homogenization and standard mechanics analyses for periodic porous composites
Hollister, S. J., & Kikuchi, N. (1992) · Computational Mechanics · doi:10.1007/bf00369853 · Cited by 509
Self-citation
Research works printed but not linked: 5
- Cowin, S. C., 1989, Bone Mechanics, CRC Press, Boca Raton, FL.
- Ko, C.-C., Douglas, W. H., and Cheng, Y.-S., 1995, “Intrinsic mechanical competence of cortical and trabecular bone measured by nanoindentation and microindentation probes,” Proc. Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 415–416.
- Meyer G. H. , 1867, “Die Architektur der Spongiosa,” Archiv fuer Anatomie, Physiologie und wissenschaftliche Medizin, Vol. 34, pp. 615–628.
- Shieh, S. J., Govind, S., Gudipaty, K., Subramanian, R., and Grimm, M. J., 1995, “High resolution ultrasonic measurement of the material properties of cortical and trabecular bone in the human vertebrae,” ASME Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 413–414.
- Zysset, P. K., Guo, X. E., Hoffler, C. E., and Goldstein, S. A., 1996, “Elastic modulus of human cortical and trabecular tissue lamellae,” Trans. 43rd Annual Meeting of the ORS, San Francisco, Vol. 2, pp. 798.
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
Biomechanics of Trabecular Bone
Keaveny, T. M., Morgan, E. F., Niebur, G. L., & Yeh, O. C. (2001) · Annual Review of Biomedical Engineering · doi:10.1146/annurev.bioeng.3.1.307 · Cited by 801
Dependence of yield strain of human trabecular bone on anatomic site
Morgan, E. F., & Keaveny, T. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00011-2 · Cited by 705
“Through advancements in imaging techniques and computational methods, it is now possible to create detailed anatomic site-specific finite element models of trabecular bone specimens (Kabel et al., 1999; Ulrich et al., 1999; Zysset et al., 1998) and whole bones (Keyak and Rossi, 2000; Lotz et al.”
MethodLin, C. Y., Kikuchi, N., & Hollister, S. J. (2004) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2003.09.029 · Cited by 384
Self-citationHeterogeneity of bone lamellar-level elastic moduli
Hoffler, C. E., Moore, K. E., Kozloff, K., Zysset, P. K., Brown, M. B., & Goldstein, S. A. (2000) · Bone · doi:10.1016/s8756-3282(00)00268-4 · Cited by 259
Self-citationAnisotropic bone remodelling model based on a continuum damage-repair theory
Doblaré, M., & Garcı́a, J. M. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00178-6 · Cited by 254
A review of morphology–elasticity relationships in human trabecular bone: theories and experiments
Zysset, P. K. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00128-3 · Cited by 223
Self-citationAn Application of Nanoindentation Technique to Measure Bone Tissue Lamellae Properties
Hoffler, C. E., Guo, X. E., Zysset, P. K., & Goldstein, S. A. (2005) · Journal of Biomechanical Engineering · doi:10.1115/1.2073671 · Cited by 222
Self-citationDoblaré, M., & García, J. M. (2001) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00069-0 · Cited by 188
Influence of boundary conditions on computed apparent elastic properties of cancellous bone
Pahr, D. H., & Zysset, P. K. (2007) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-007-0109-7 · Cited by 168
Self-citationÖhman‐Mägi, C., Baleani, M., Perilli, E., Dall’Ara, E., Tassani, S., Baruffaldi, F., & Viceconti, M. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2006.11.020 · Cited by 136
Age, gender, and bone lamellae elastic moduli
Hoffler, C. E., Moore, K. E., Kozloff, K., Zysset, P. K., & Goldstein, S. A. (2000) · Journal of Orthopaedic Research · doi:10.1002/jor.1100180315 · Cited by 129
Self-citationMatsuura, M., Eckstein, F., Lochmüller, E.-M., & Zysset, P. K. (2008) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-006-0073-7 · Cited by 117
Self-citationFundamental Biomechanics in Bone Tissue Engineering
Wang, X., Nyman, J. S., Dong, X., Leng, H., & Reyes, M. (2010) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02579-2 · Cited by 121
The Three-dimensional Cancellous Bone Architecture of the Human Mandibular Condyle
Giesen, E. B. W., & van Eijden, T. M. G. J. (2000) · Journal of Dental Research · doi:10.1177/00220345000790041101 · Cited by 105
Bone remodelling simulation: a tool for implant design
García, J. M., Doblaré, M., & Cegoñino, J. (2002) · Computational Materials Science · doi:10.1016/s0927-0256(02)00254-9 · Cited by 99
Hellmich, C., & Ulm, F. (2003) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-002-0025-9 · Cited by 94
Empirical relationships between bone density and ultimate strength: A literature review
Fleps, I., Bahaloo, H., Zysset, P. K., Ferguson, S. J., Pálsson, H., & Helgason, B. (2020) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2020.103866 · Cited by 85
Self-citationCompressive properties of trabecular bone in the distal femur
Burgers, T., Mason, J., Niebur, G. L., & Ploeg, H. (2008) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.11.018 · Cited by 77
Concept and development of an orthotropic FE model of the proximal femur
Wirtz, D. C., Pandorf, T., Portheine, F., Radermacher, K., Schiffers, N., Prescher, A., Weichert, D., & Niethard, F. U. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(02)00309-3 · Cited by 74
Composite Finite Elements for Elliptic Boundary Value Problems with Discontinuous Coefficients
Sauter, S. A., & Warnke, R. (2005) · Computing · doi:10.1007/s00607-005-0150-2 · Cited by 67
A bone remodelling model including the directional activity of BMUs
Martínez‐Reina, J., García‐Aznar, J. M., Domínguez, J., & Doblaré, M. (2008) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-008-0122-5 · Cited by 64
Wald, M., Vasilić, B., Saha, P. K., & Wehrli, F. W. (2007) · Medical Physics · doi:10.1118/1.2437281 · Cited by 63
Prediction of anisotropic elastic properties of snow from its microstructure
Srivastava, P., Chandel, C., Mahajan, P., & Pankaj, P. (2016) · Cold Regions Science and Technology · doi:10.1016/j.coldregions.2016.02.002 · Cited by 58
Pahr, D. H., Dall’Ara, E., Varga, P., & Zysset, P. K. (2011) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2011.556627 · Cited by 56
Self-citationYi, W.-J., Heo, M.-S., Lee, S.-S., Choi, S.-C., Huh, K., & Lee, S. (2007) · Oral Surgery Oral Medicine Oral Pathology Oral Radiology and Endodontology · doi:10.1016/j.tripleo.2006.11.005 · Cited by 56
Eberle, S., Göttlinger, M., & Augat, P. (2013) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2013.06.035 · Cited by 52
A novel approach to estimate trabecular bone anisotropy using a database approach
Hazrati, J., Ito, K., Cataldi, M., Taddei, F., & van Rietbergen, B. (2013) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2013.07.042 · Cited by 50
Topology-based orientation analysis of trabecular bone networks
Gomberg, B. R., Saha, P. K., & Wehrli, F. W. (2003) · Medical Physics · doi:10.1118/1.1527038 · Cited by 50
Reiser, K. M., Bratton, C., Yankelevich, D. R., Knoesen, A., Rocha‐Mendoza, I., & Lotz, J. C. (2007) · Journal of Biomedical Optics · doi:10.1117/1.2812631 · Cited by 46
Rupin, F., Saïed, A., Dalmas, D., Peyrin, F., Haupert, S., Raum, K., Barthel, É., Boivin, G., & Laugier, P. (2009) · Japanese Journal of Applied Physics · doi:10.1143/jjap.48.07gk01 · Cited by 47
Panyasantisuk, J., Pahr, D. H., Gross, T. J., & Zysset, P. K. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4028968 · Cited by 38
Self-citationWald, M., Magland, J. F., Rajapakse, C. S., & Wehrli, F. W. (2010) · Journal of Magnetic Resonance Imaging · doi:10.1002/jmri.22158 · Cited by 37
Müller, P., Synek, A., Stauß, T., Steinnagel, C., Ehlers, T., Gembarski, P. C., Pahr, D. H., & Lachmayer, R. (2024) · Scientific Reports · doi:10.1038/s41598-024-56327-4 · Cited by 36
Clinical Tools to Evaluate Bone Strength
Manske, S. L., MACDONALD, H. M., Nishiyama, K. K., Boyd, S. K., & McKay, H. A. (2010) · Clinical Reviews in Bone and Mineral Metabolism · doi:10.1007/s12018-009-9066-2 · Cited by 36
Nazemi, S. M., Cooper, D. M. L., & Johnston, J. D. (2016) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2016.06.011 · Cited by 34
3D Composite Finite Elements for Elliptic Boundary Value Problems with Discontinuous Coefficients
Preußer, T., Rumpf, M., Sauter, S. A., & Schwen, L. O. (2011) · SIAM Journal on Scientific Computing · doi:10.1137/100791750 · Cited by 32
Hosseini, H. S., Clouthier, A. L., & Zysset, P. K. (2014) · Journal of Biomechanical Engineering · doi:10.1115/1.4026409 · Cited by 32
Self-citationA novel approach to estimate trabecular bone anisotropy from stress tensors
Hazrati, J., Ito, K., & van Rietbergen, B. (2014) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-014-0584-6 · Cited by 31
van Lenthe, H., & Huiskes, R. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(02)00081-7 · Cited by 30
Kreipke, T. C., Rivera, N. C., Garrison, J. G., Easley, J. T., Turner, A. S., & Niebur, G. L. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.03.025 · Cited by 29
Widmer, R. P., Helgason, B., Hazrati, J., van den Bergh, J. P., van Rietbergen, B., & Ferguson, S. J. (2016) · PLoS ONE · doi:10.1371/journal.pone.0151680 · Cited by 29
Hierarchical Structure of Bone and Micro-Computed Tomography
McCreadie, B. R., Goulet, R. W., Feldkamp, L. A., & Goldstein, S. A. (2001) · Advances in experimental medicine and biology · doi:10.1007/978-1-4615-0651-5_8 · Cited by 29
Self-citationPreparation of On-Axis Cylindrical Trabecular Bone Specimens Using Micro-CT Imaging
Wang, X., Liu, A. X., & Niebur, G. L. (2004) · Journal of Biomechanical Engineering · doi:10.1115/1.1645866 · Cited by 29
Varga, P., & Zysset, P. K. (2009) · Medical Image Analysis · doi:10.1016/j.media.2009.02.007 · Cited by 28
Self-citationSabet, F. A., Jin, O., Korić, S., & Jasiuk, I. (2017) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2941 · Cited by 28
Biomechanics of the Human Osteochondral Unit: A Systematic Review
Berni, M., Marchiori, G., Baleani, M., Giavaresi, G., & Lopomo, N. F. (2024) · Materials · doi:10.3390/ma17071698 · Cited by 27
Daszkiewicz, K., Maquer, G., & Zysset, P. K. (2016) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-016-0849-3 · Cited by 27
Self-citationExperimental validation of finite element predicted bone strain in the human metatarsal
Fung, A., Loundagin, L. L., & Edwards, W. B. (2017) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2017.06.010 · Cited by 26
A finite element analysis of two novel screw designs for scaphoid waist fractures
Varga, P., Zysset, P. K., Schefzig, P., Unger, E., Mayr, W., & Erhart, J. (2015) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2015.11.006 · Cited by 25
Self-citationStructural and Radiological Parameters for the Nondestructive Characterization of Trabecular Bone
Pattijn, V., Cleynenbreugel, T. V., Sloten, J. V., Audekercke, R. V., der Perre, G. V., & Wevers, M. (2001) · Annals of Biomedical Engineering · doi:10.1114/1.1424922 · Cited by 25
Smith, S. M., & Angielczyk, K. D. (2020) · Proceedings of the Royal Society B Biological Sciences · doi:10.1098/rspb.2020.0457 · Cited by 24
Oefner, C., Riemer, E., Funke, K., Werner, M., Heyde, C.-E., & Schoenfelder, S. (2021) · Medical & Biological Engineering & Computing · doi:10.1007/s11517-021-02465-0 · Cited by 24
Black, C. R. M., Gibbs, D., McEwan, J. K., Kanczler, J. M., Fernández, M. P., Tozzi, G., Dawson, J. I., & Oreffo, R. O. C. (2022) · Journal of Tissue Engineering · doi:10.1177/20417314221113746 · Cited by 24
Numerical simulation of bone remodelling around dental implants
Ojeda, J., Martínez‐Reina, J., García‐Aznar, J. M., Domínguez, J., & Doblaré, M. (2011) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411911410165 · Cited by 21
Biomechanics of Vertebral Bone
Keaveny, T. M., & Buckley, J. M. (2006) · Elsevier eBooks · doi:10.1016/b978-012369390-7/50005-8 · Cited by 20
Super-Resolution of Clinical Ct: Revealing Microarchitecture in Whole Bone Clinical Ct Image Data
Frazer, L. L., Louis, N., Zbijewski, W. B., Vaishnav, J., Clark, K., & Nicolella, D. P. (2023) · Bone · doi:10.1016/j.bone.2024.117115 · Cited by 19
Relating mechanical properties of vertebral trabecular bones to osteoporosis
Cesar, R., Bravo‐Castillero, J., Rodríguez-Ramos, R., Pereira, C. A. M., Zanin, H., & Rollo, J. M. D. D. A. (2019) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2019.1699542 · Cited by 19
Giesen, E. B. W., Ding, M. L., Dalstra, M., & van Eijden, T. M. G. J. (2002) · Calcified Tissue International · doi:10.1007/s00223-002-0002-4 · Cited by 19
Li, Z., Liu, P., Yuan, Y., Liang, X., Lei, J., Zhu, X., Zhang, Z., & Cai, L. (2021) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-021-01491-z · Cited by 18
Characterization of structure and properties of bone by spectral measure method
Cherkaev, E., & Bonifasi‐Lista, C. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2010.10.031 · Cited by 18
Kuroda, Y., Yonemitsu, I., Hosomichi, J., Watari, I., Takei, M., Ishida, Y., & Ono, T. (2011) · The Angle Orthodontist · doi:10.2319/122810-749.1 · Cited by 18
Savoldelli, C., Ehrmann, E., & Tillier, Y. (2021) · Scientific Reports · doi:10.1038/s41598-021-88332-2 · Cited by 17
Structural additive manufacturing parts bio-inspired from trabecular bone form-function relationship
Cadoret, N., Chaves‐Jacob, J., & Linares, J. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112029 · Cited by 16
Bone Quality: The Mechanical Effects of Microarchitecture and Matrix Properties
Day, J. S. (2005) · EUR Research Repository (Erasmus University Rotterdam) · Cited by 15
Wald, M., Magland, J. F., Rajapakse, C. S., Bhagat, Y. A., & Wehrli, F. W. (2011) · Magnetic Resonance in Medicine · doi:10.1002/mrm.23253 · Cited by 14
Simon, M., Indermaur, M., Schenk, D., Hosseinitabatabaei, S., Willie, B. M., & Zysset, P. K. (2021) · Bone · doi:10.1016/j.bone.2021.116282 · Cited by 13
Self-citationEffects of damage on the orthotropic material symmetry of bovine tibial trabecular bone
Liu, X., Wang, X., & Niebur, G. L. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00217-3 · Cited by 13
Experimental Measurement of Three-Dimensional Continuum-Level Strain Fields in Trabecular Bone
Bay, B. K. (2001) · Advances in experimental medicine and biology · doi:10.1007/978-1-4615-0651-5_18 · Cited by 13
Modeling orthotropic elasticity, localized plasticity and fracture in trabecular bone
O'Connor, D. T., Elkhodary, K. I., Fouad, Y., Greene, M. S., Sabet, F. A., Qian, J., Zhang, Y. J., Liu, W. K., & Jasiuk, I. (2016) · Computational Mechanics · doi:10.1007/s00466-016-1301-3 · Cited by 12
An image-based approach for structure investigation and 3D numerical modelling of polymeric foams
Tagliabue, S., Andena, L., Nacucchi, M., & Pascalis, F. D. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02438-9 · Cited by 11
Yan, Z., Hu, Y., Li, X., Liu, Z., Wang, P., Liu, B., Tian, Y., & Zhuang, Z. (2023) · IEEE Transactions on Biomedical Engineering · doi:10.1109/tbme.2023.3315846 · Cited by 10
Wili, P., Maquer, G., Panyasantisuk, J., & Zysset, P. K. (2017) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-017-0928-0 · Cited by 10
Self-citationMicromechanics of Bone Modeled as a Composite Material
Jasiuk, I. (2017) · Springer eBooks · doi:10.1007/978-3-319-52794-9_10 · Cited by 10
Yan, Z., Hu, Y., Shi, H., Wang, P., Liu, Z., Tian, Y., & Zhuang, Z. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105643 · Cited by 9
Effects of loading rate, age, and morphology on the material properties of human rib trabecular bone
Albert, D. L., Katzenberger, M. J., Hunter, R. L., Agnew, A. M., & Kemper, A. R. (2023) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2023.111670 · Cited by 9
Sierpowska, J. (2007) · UEF eRepo (University of Eastern Finland) · Cited by 9
Kim, W., Oravec, D. J., Divine, G., Flynn, M. J., & Yeni, Y. N. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-017-1792-x · Cited by 8
Shore, S. W., Unnikrishnan, G. U., Hussein, A. I., & Morgan, E. F. (2012) · CRC Press eBooks · doi:10.1201/b13733-3 · Cited by 8
Bahrami, M., Khonakdar, H., Moghaddam, A., Mahand, S. N., Bambizi, P. E., Kruppke, B., & Khonakdar, H. A. (2024) · Progress in Biophysics and Molecular Biology · doi:10.1016/j.pbiomolbio.2024.10.001 · Cited by 7
Gałka, A., Telega, J. J., & Tokarzewski, S. (1999) · Archives of Mechanics · Cited by 7
Micro-modelling and Analysis of Actual and Idealised Cancellous Structure
Kadir, M. R. A., Syahrom, A., Yusof, M. A. R., & Kamsah, N. (2008) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-540-69139-6_110 · Cited by 6
Numerical Homogenization of Trabecular Bone Specimens using Composite Finite Elements
Schwen, L. O. (2010) · Cited by 6
Correlations between fabric tensors computed on cone beam and micro computed tomography images
Moreno, R., Borga, M., Klintström, E., Brismar, T. B., & Smedby, Ö. (2013) · CRC Press eBooks · doi:10.1201/b15810-73 · Cited by 6
Prediction of distal radius fracture load using HR-pQCT-based finite element analysis
Varga, P. (2009) · reposiTUm (TU Wien) · Cited by 6
Exploration of unique porous bone materials for candidacy in bioinspired material design
Seek, T. W., Donahue, S., Bradley, T., & Florant, G. L. (2018) · Digital Collections of Colorado (Colorado State University) · doi:10.25675/3.024493 · Cited by 5
Computational Modeling of Trabecular Bone Mechanics
Niebur, G. L., & Keaveny, T. M. (2009) · Springer eBooks · doi:10.1007/978-90-481-3575-2_9 · Cited by 5
Fabric tensor based boundary element analysis of porous solids
Berger, J. R. (2010) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2010.09.008 · Cited by 5
Influence de l’hétérogénéité des propriétés mécaniques sur la résistance de l’os trabéculaire humain
Dépalle, B. (2011) · theses.fr (ABES) · doi:10.70675/bf4d472cz0dd4z4d20za7f2zd8806f663dd6 · Cited by 5
Moreno, R., Borga, M., Klintström, E., Brismar, T. B., & Smedby, Ö. (2015) · Lecture notes in computational vision and biomechanics · doi:10.1007/978-3-319-13407-9_13 · Cited by 4
A 2D stochastic micromechanical homogenization framework for trabecular bone
Luppino, F., Bellis, M. L. D., Falcinelli, C., Recrosi, F., & Vasta, M. (2026) · Meccanica · doi:10.1007/s11012-026-02114-6 · Cited by 3
Mechanical Behavior of Trabecular Bone
Mostakhdemin, M. (2017) · Elsevier eBooks · doi:10.1016/b978-0-12-804634-0.00003-3 · Cited by 3
Johnson, T. P. (2005) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 3
Elmabrouk, B., & Berger, J. R. (2012) · Computational Mechanics · doi:10.1007/s00466-012-0753-3 · Cited by 2
Multiscale simulation of bone regeneration in ti ssue engineering processes
Castellano, M. D. (2008) · Cited by 2
Wang, X., Nyman, J. S., Dong, X., Leng, H., & Reyes, M. (2010) · Synthesis lectures on tissue engineering · doi:10.1007/978-3-031-02579-2_4 · Cited by 2
Curriculum Vitae Personal Data
Selmeczi, D. (2008) · Cited by 2
Sacher, S. E., Hernandez, C. J., & Donnelly, E. L. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100206 · Cited by 1
Doblaré, M., Pérez-Aliacar, M., Ayensa-Jiménez, J., & Ashrafi, M. (2025) · Mechanics of Materials · doi:10.1016/j.mechmat.2025.105546 · Cited by 1
Forward and inverse optimality problems of bone adaptation at the homogenised RVE level
Zysset, P. K. (2026) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-025-02024-8 · Cited by 1
Self-citation
Metadata
- Authors
- Zysset, P. K., Goulet, R. W., & Hollister, S. J.
- Affiliations
- University of Michigan (US)
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 1998-10-01
- Volume
- 120
- Issue
- 5
- Pages
- 640-646
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2091033405
- Cited by
- 105
- References
- 30
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 3 · 2023: 5 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 1 · 2018: 2 · 2017: 6 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 3 · 2012: 2
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- National Institutes of Health (5r01ar034399-12, 5r01ar041349-04)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR34399, AR41349)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- trabecular bone, bone microarchitecture, elastic properties, homogenization, anisotropy, mean intercept length, fabric tensor, micro-computed tomography, specimen size effect
- MeSH terms
- Adult, Aged, Algorithms, Anthropometry, Bone and Bones, Cadaver, Elasticity, Female, Humans, Male, Middle Aged, Models, Biological, Numerical Analysis, Computer-Assisted, Predictive Value of Tests, Tensile Strength, Tomography, X-Ray Computed, Reproducibility of Results, Bias, Anisotropy, Finite Element Analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.