CoChat

A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties

Open access
Zysset, P. K., Goulet, R. W., Hollister, S. J. · 1998 · Journal of Biomechanical Engineering

The DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index.

Abstract

An alternative concept of the relationship between morphological and elastic properties of trabecular bone is presented and applied to human tissue from several anatomical locations using a digital approach. The three-dimensional morphology of trabecular bone was assessed with a microcomputed tomography system and the method of directed secants as well as the star volume procedure were used to compute mean intercept length (MIL) and average bone length (ABL) of 4 mm cubic specimens. Assuming isotropic elastic properties for the trabecular tissue, the general elastic tensors of the bone specimens were determined using the homogenization method and the closest orthotropic tensors were calculated with an optimization algorithm. The assumption of orthotropy for trabecular bone was found to improve with specimen size and hold within 6.1 percent for a 4 mm cube size. A strong global relationship (r2 = 0.95) was obtained between fabric and the orthotropic elastic tensor with a minimal set of five constants. Mean intercept length and average bone length provided an equivalent power of prediction. These results support the hypothesis that the elastic properties of human trabecular bone from an arbitrary anatomical location can be estimated from an approximation of the anisotropic morphology and a prior knowledge of tissue properties.

Overview

Integrity signals

Registry

Crossref · 10.1115/1.2834756

Cites

29 of 29 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 5

  1. Cowin, S. C., 1989, Bone Mechanics, CRC Press, Boca Raton, FL.
  2. Ko, C.-C., Douglas, W. H., and Cheng, Y.-S., 1995, “Intrinsic mechanical competence of cortical and trabecular bone measured by nanoindentation and microindentation probes,” Proc. Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 415–416.
  3. Meyer G. H. , 1867, “Die Architektur der Spongiosa,” Archiv fuer Anatomie, Physiologie und wissenschaftliche Medizin, Vol. 34, pp. 615–628.
  4. Shieh, S. J., Govind, S., Gudipaty, K., Subramanian, R., and Grimm, M. J., 1995, “High resolution ultrasonic measurement of the material properties of cortical and trabecular bone in the human vertebrae,” ASME Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 413–414.
  5. Zysset, P. K., Guo, X. E., Hoffler, C. E., and Goldstein, S. A., 1996, “Elastic modulus of human cortical and trabecular tissue lamellae,” Trans. 43rd Annual Meeting of the ORS, San Francisco, Vol. 2, pp. 798.

Cited by

See all 122

Metadata

Authors
Zysset, P. K., Goulet, R. W., & Hollister, S. J.
Affiliations
University of Michigan (US)
Venue
Journal of Biomechanical Engineering
Published
1998-10-01
Volume
120
Issue
5
Pages
640-646
ISSN
  • 0148-0731 (ISSN-L)
  • 1528-8951
OpenAlex
W2091033405
Cited by
105
References
30
Citations by year
2026: 3 · 2025: 3 · 2024: 3 · 2023: 5 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 1 · 2018: 2 · 2017: 6 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 3 · 2012: 2
FWCI
3.41
Type
journal article
Language
en
Open access
Locations
  • Journal of Biomechanical Engineering (publishedVersion)
  • PubMed (publishedVersion)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
  • Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
Funders
  • National Institutes of Health (5r01ar034399-12, 5r01ar041349-04)
  • National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR34399, AR41349)
Topics
  • Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
  • Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
  • Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
Keywords
trabecular bone, bone microarchitecture, elastic properties, homogenization, anisotropy, mean intercept length, fabric tensor, micro-computed tomography, specimen size effect
MeSH terms
Adult, Aged, Algorithms, Anthropometry, Bone and Bones, Cadaver, Elasticity, Female, Humans, Male, Middle Aged, Models, Biological, Numerical Analysis, Computer-Assisted, Predictive Value of Tests, Tensile Strength, Tomography, X-Ray Computed, Reproducibility of Results, Bias, Anisotropy, Finite Element Analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.