A Global Relationship Between Trabecular Bone Morphology and Homogenized Elastic Properties
Open accessThe DOI matches its Crossref record; 29 of the 30 references it cites were found in a registry or an index.
Abstract
An alternative concept of the relationship between morphological and elastic properties of trabecular bone is presented and applied to human tissue from several anatomical locations using a digital approach. The three-dimensional morphology of trabecular bone was assessed with a microcomputed tomography system and the method of directed secants as well as the star volume procedure were used to compute mean intercept length (MIL) and average bone length (ABL) of 4 mm cubic specimens. Assuming isotropic elastic properties for the trabecular tissue, the general elastic tensors of the bone specimens were determined using the homogenization method and the closest orthotropic tensors were calculated with an optimization algorithm. The assumption of orthotropy for trabecular bone was found to improve with specimen size and hold within 6.1 percent for a 4 mm cube size. A strong global relationship (r2 = 0.95) was obtained between fabric and the orthotropic elastic tensor with a minimal set of five constants. Mean intercept length and average bone length provided an equivalent power of prediction. These results support the hypothesis that the elastic properties of human trabecular bone from an arbitrary anatomical location can be estimated from an approximation of the anisotropic morphology and a prior knowledge of tissue properties.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Trabecular bone often exhibits orthotropic symmetry (94, 95), although in some cases, such as in the vertebrae, transverse isotropy has been reported (93).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [95]
Citations
Cites
Non-Homogeneous Media and Vibration Theory
(1980) · Lecture Notes in Physics · doi:10.1007/3-540-10000-8 · Cited by 3,637
The mechanical behaviour of cancellous bone
Gibson, L. J. (1985) · Journal of Biomechanics · doi:10.1016/0021-9290(85)90287-8 · Cited by 932
The relationship between the structural and orthogonal compressive properties of trabecular bone
Goulet, R. W., Goldstein, S. A., Ciarelli, M. J., Kuhn, J. L., Brown, M. B., & Feldkamp, L. A. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90014-0 · Cited by 741
Self-citationPredicting the compressive mechanical behavior of bone
Keller, T. S. (1994) · Journal of Biomechanics · doi:10.1016/0021-9290(94)90056-6 · Cited by 667
Distribution of directional data and fabric tensors
Ken-Ichi, K. (1984) · International Journal of Engineering Science · doi:10.1016/0020-7225(84)90090-9 · Cited by 663
Characterization of microstructural anisotropy in orthotropic materials using a second rank tensor
Harrigan, T. P., & Mann, R. W. (1984) · Journal of Materials Science · doi:10.1007/bf00540446 · Cited by 603
The quantitative morphology of anisotropic trabecular bone
Whitehouse, W. J. (1974) · Journal of Microscopy · doi:10.1111/j.1365-2818.1974.tb03878.x · Cited by 579
The relationship between the elasticity tensor and the fabric tensor
Cowin, S. C. (1985) · Mechanics of Materials · doi:10.1016/0167-6636(85)90012-2 · Cited by 570
Choi, K., Kuhn, J. L., Ciarelli, M. J., & Goldstein, S. A. (1990) · Journal of Biomechanics · doi:10.1016/0021-9290(90)90003-l · Cited by 532
A comparison of homogenization and standard mechanics analyses for periodic porous composites
Hollister, S. J., & Kikuchi, N. (1992) · Computational Mechanics · doi:10.1007/bf00369853 · Cited by 509
Self-citation
Research works printed but not linked: 5
- Cowin, S. C., 1989, Bone Mechanics, CRC Press, Boca Raton, FL.
- Ko, C.-C., Douglas, W. H., and Cheng, Y.-S., 1995, “Intrinsic mechanical competence of cortical and trabecular bone measured by nanoindentation and microindentation probes,” Proc. Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 415–416.
- Meyer G. H. , 1867, “Die Architektur der Spongiosa,” Archiv fuer Anatomie, Physiologie und wissenschaftliche Medizin, Vol. 34, pp. 615–628.
- Shieh, S. J., Govind, S., Gudipaty, K., Subramanian, R., and Grimm, M. J., 1995, “High resolution ultrasonic measurement of the material properties of cortical and trabecular bone in the human vertebrae,” ASME Summer Bioengineering Conference of the ASME, Beaver Creek, Vol. 1, pp. 413–414.
- Zysset, P. K., Guo, X. E., Hoffler, C. E., and Goldstein, S. A., 1996, “Elastic modulus of human cortical and trabecular tissue lamellae,” Trans. 43rd Annual Meeting of the ORS, San Francisco, Vol. 2, pp. 798.
Cited by
Items 101–122 of 122
Morphology-Based Characterization of 3D Anisotropy in Porous Rock: Pore Orientation
Jeong, Y. J., Kang, D. H., Kim, K. Y., & Yun, T. S. (2014) · Geo-Congress 2014 Technical Papers · doi:10.1061/9780784413272.056 · Cited by 1
Hazrati, J. (2013) · TU/e Research Portal · doi:10.6100/ir759548 · Cited by 1
Morphology and mechanical properties of the cancellous bone in the mandibular condyle
Giesen, E. B. W. (2002) · UvA-DARE (University of Amsterdam) · Cited by 1
Determining Effective Elasticity Parameters of Microstuctured Materials
Schwen, L. O., Wolfram, U., Wilke, H., & Rumpf, M. (2008) · Cited by 1
Rahovich, P. (2022) · Lu Zone Ul (Laurentian University) · Cited by 1
Modèles topologiques et mécaniques pour l’étude du comportement anisotrope de l’os trabéculaire
Rogalski, N. (2023) · theses.fr (ABES) · doi:10.70675/aac283e9z823fz44d1za581zd060f5ec8626 · Cited by 1
Scale transitions in bone elasticity from the nanometer level up to cortical and trabecular bone
Hellmich, C., & Ulm, F. (2003) · Elsevier eBooks · doi:10.1016/b978-008044046-0.50417-6
The biomechanics of bone turnover
Slyfield, C. R. (2012) · eCommons (Cornell University)
Modeling of material and architectural quality of trabecular bone
Ruffoni, D. (2007) · ORBi (University of Liège)
Kummari, S. R. (2011) · OhioLink ETD Center (Ohio Library and Information Network)
Sharabi, M., Wilke, H., & Haj-Ali, R. M. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-812851-0.00005-7
Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading
Januddi, M. S., & Januddi, M. A. F. M. S. (2015)
Constitutive models of bone: The human femur
Branni, M. G. (2023) · Queensland University of Technology · doi:10.5204/thesis.eprints.243151
Femoral Microstructure Super Resolution: Importance of Algorithm Type and DimensionalityPreprint
Hezrony, B. S., Lopes, P. C. F., Weaver, A. A., Niazi, K. K., & Brown, P. J. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5217807
Simon, M., Uppuganti, S., Nyman, J. S., & Zysset, P. K. (2025) · Bone Reports · doi:10.1016/j.bonr.2025.101884
Self-citationBachmann, S. (2023) · reposiTUm (TU Wien) · doi:10.34726/hss.2023.108281
Sacher, S. E. (2021) · eCommons (Cornell University) · doi:10.7298/cq66-rc66
Fabric tensors in bone mechanics: elastic constitutive relationships and strength criteria
Jemioło, S., & Telega, J. J. (2003) · RCIN (Digital Repository of the Scientifics Institutes) (Institute of Archaeology and Ethnology of the Polish Academy of Sciences)
Bone remodeling simulations: challenges, problems and applications
Millán, N. G., Pérez Ansón, M. Á., & García Aznar, J. M. (2016) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)
Homogenization methods in bone mechanics
(2003) · RCIN (Digital Repository of the Scientifics Institutes) (Institute of Archaeology and Ethnology of the Polish Academy of Sciences)
Morphology-mechanical property relationships in human trabecular bone
Zysset, P. K. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-26739-0.00010-7
Self-citation
Metadata
- Authors
- Zysset, P. K., Goulet, R. W., & Hollister, S. J.
- Affiliations
- University of Michigan (US)
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 1998-10-01
- Volume
- 120
- Issue
- 5
- Pages
- 640-646
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2091033405
- Cited by
- 105
- References
- 30
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 3 · 2023: 5 · 2022: 2 · 2021: 6 · 2020: 2 · 2019: 1 · 2018: 2 · 2017: 6 · 2016: 5 · 2015: 3 · 2014: 5 · 2013: 3 · 2012: 2
- FWCI
- 3.41
- Type
- journal article
- Language
- en
- Open access
- green
- infoscience.epfl.ch
- Locations
- Journal of Biomechanical Engineering (publishedVersion)
- PubMed (publishedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion)
- Infoscience (Ecole Polytechnique Fédérale de Lausanne) (submittedVersion, cc-by-nc-nd)
- Funders
- National Institutes of Health (5r01ar034399-12, 5r01ar041349-04)
- National Institute of Arthritis and Musculoskeletal and Skin Diseases (AR34399, AR41349)
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Engineering › Mechanics of Materials › Composite Material Mechanics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Keywords
- trabecular bone, bone microarchitecture, elastic properties, homogenization, anisotropy, mean intercept length, fabric tensor, micro-computed tomography, specimen size effect
- MeSH terms
- Adult, Aged, Algorithms, Anthropometry, Bone and Bones, Cadaver, Elasticity, Female, Humans, Male, Middle Aged, Models, Biological, Numerical Analysis, Computer-Assisted, Predictive Value of Tests, Tensile Strength, Tomography, X-Ray Computed, Reproducibility of Results, Bias, Anisotropy, Finite Element Analysis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.