The DOI matches its Crossref record.
On-Line Computational Scheme for Mechanical Manipulators
Abstract
Industrial robots are mechanical manipulators whose dynamic characteristics are highly nonlinear. To control a manipulator which carries a variable or unknown load and moves along a planned path, it is required to compute the forces and torques needed to drive all its joints accurately and frequently at an adequate sampling frequency (no less than 60 Hz for the arm considered). This paper presents a new approach of computation based on the method of Newton-Euler formulation which is independent of the type of manipulator-configuration. This method involves the successive transformation of velocities and accelerations from the base of the manipulator out to the gripper, link by link, using the relationships of moving coordinate systems. Forces are then transformed back from the gripper to the base to obtain the joint torques. Theoretically the mathematical model is “exact”. A program has been written in floating point assembly language which has an average execution time of 4.5 milliseconds on a PDP 11/45 computer for a Stanford manipulator. This allows an on-line computation within control systems with a sampling frequency no lower than 60 Hz. A further advantage of using this method is that the amount of computation increases linearly with the number of links whereas the conventional method based on Lagrangian formulation increases as the quartic of the number of links.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
SLOTINE, J. J., & SASTRY, S. S. (1983) · International Journal of Control · doi:10.1080/00207178308933088 · Cited by 1,800
A hierarchical neural-network model for control and learning of voluntary movement
Kawato, M., Furukawa, K., & Suzuki, R. (1987) · Biological Cybernetics · doi:10.1007/bf00364149 · Cited by 1,573
Compliance and Force Control for Computer Controlled Manipulators
Mason, M. T. (1981) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1981.4308708 · Cited by 1,542
Rigid Body Dynamics Algorithms
Featherstone, R. (2008) · Springer eBooks · doi:10.1007/978-1-4899-7560-7 · Cited by 1,376
Resolved-acceleration control of mechanical manipulators
Luh, J., Walker, M., & Paul, R. (1980) · IEEE Transactions on Automatic Control · doi:10.1109/tac.1980.1102367 · Cited by 1,203
Self-citationAdaptive manipulator control: A case study
Slotine, J.-J. E., & Weiping, L. (1988) · IEEE Transactions on Automatic Control · doi:10.1109/9.14411 · Cited by 1,032
Hollerbach, J. M. (1980) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1980.4308393 · Cited by 874
Wampler, C. (1986) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1986.289285 · Cited by 850
Dynamic interactions between limb segments during planar arm movement
Hollerbach, J. M., & Flash, T. (1982) · Biological Cybernetics · doi:10.1007/bf00353957 · Cited by 814
Recursive Lagrangian Dynamics of Flexible Manipulator Arms
Book, W. J. (1984) · The International Journal of Robotics Research · doi:10.1177/027836498400300305 · Cited by 714
The explicit dynamic model and inertial parameters of the PUMA 560 arm
Armstrong, B., Khatib, O., & Burdick, J. (1986) · Proceedings. 1986 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1986.1087644 · Cited by 613
Estimation of Inertial Parameters of Manipulator Loads and Links
Atkeson, C. G., An, C. H., & Hollerbach, J. M. (1986) · The International Journal of Robotics Research · doi:10.1177/027836498600500306 · Cited by 590
The Calculation of Robot Dynamics Using Articulated-Body Inertias
Featherstone, R. (1983) · The International Journal of Robotics Research · doi:10.1177/027836498300200102 · Cited by 578
The Robust Control of Robot Manipulators
Slotine, J.-J. E. (1985) · The International Journal of Robotics Research · doi:10.1177/027836498500400205 · Cited by 565
Dynamic Model of a Multibending Soft Robot Arm Driven by Cables
Renda, F., Giorelli, M., Calisti, M., Cianchetti, M., & Laschi, C. (2014) · IEEE Transactions on Robotics · doi:10.1109/tro.2014.2325992 · Cited by 482
The kinematics, dynamics, and control of free-flying and free-floating space robotic systems
Dubowsky, S., & Papadopoulos, E. (1993) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.258046 · Cited by 452
Feedback-error-learning neural network for trajectory control of a robotic manipulator
Miyamoto, H., Kawato, M., Setoyama, T., & Suzuki, R. (1988) · Neural Networks · doi:10.1016/0893-6080(88)90030-5 · Cited by 443
Dynamic Model Identification for Industrial Robots
(2007) · IEEE Control Systems · doi:10.1109/mcs.2007.904659 · Cited by 409
Carpentier, J., Saurel, G., Buondonno, G., Mirabel, J., Lamiraux, F., Stasse, O., & Mansard, N. (2019) · 2019 IEEE/SICE International Symposium on System Integration (SII) · doi:10.1109/sii.2019.8700380 · Cited by 395
Hierarchical neural network model for voluntary movement with application to robotics
Kawato, M., Uno, Y., Isobe, M., & Suzuki, R. (1988) · IEEE Control Systems Magazine · doi:10.1109/37.1867 · Cited by 390
Application of a General Learning Algorithm to the Control of Robotic Manipulators
Miller, W. T., Glanz, F. H., & Kraft, L. G. (1987) · The International Journal of Robotics Research · doi:10.1177/027836498700600207 · Cited by 373
Distance functions and their application to robot path planning in the presence of obstacles
Gilbert, E., & Johnson, D. (1985) · IEEE Journal on Robotics and Automation · doi:10.1109/jra.1985.1087003 · Cited by 367
Efficient generation of motion transitions using spacetime constraints
Rose, C., Guenter, B., Bodenheimer, B., & Cohen, M. F. (1996) · Proceedings of the 23rd annual conference on Computer graphics and interactive techniques · doi:10.1145/237170.237229 · Cited by 321
Miller, W. T., Hewes, R. P., Glanz, F. H., & Kraft, L. G. (1990) · IEEE Transactions on Robotics and Automation · doi:10.1109/70.88112 · Cited by 318
Adaptive Tracking Control for Robots with Unknown Kinematic and Dynamic Properties
Cheah, C. C., Liu, C., & Slotine, J. J. E. (2006) · The International Journal of Robotics Research · doi:10.1177/0278364906063830 · Cited by 313
Robot Arm Kinematics, Dynamics, and Control
Lee (1982) · Computer · doi:10.1109/mc.1982.1653917 · Cited by 292
Closed-loop manipulator control using quaternion feedback
Yuan, J. S. (1988) · IEEE Journal on Robotics and Automation · doi:10.1109/56.809 · Cited by 269
Solving Bernstein's Problem: A Proposal for the Development of Coordinated Movement by Selection
Sporns, O., & Edelman, G. M. (1993) · Child Development · doi:10.1111/j.1467-8624.1993.tb04182.x · Cited by 38
Metadata
- Authors
- Luh, J. Y. S., Walker, M. W., & Paul, R. P. C.
- Venue
- Journal of Dynamic Systems, Measurement, and Control
- Publisher
- ASME International
- Published
- 1980-06-01
- Volume
- 102
- Issue
- 2
- Pages
- 69-76
- ISSN
- 0022-0434 (ISSN-L)
- 1528-9028
- OpenAlex
- W1966552874
- Cited by
- 1,585
- References
- 0
- FWCI
- 64.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.