The DOI matches its Crossref record.
A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks
Abstract
A line integral is exhibited which has the same value for all paths surrounding the tip of a notch in the two-dimensional strain field of an elastic or deformation-type elastic-plastic material. Appropriate integration path choices serve both to relate the integral to the near tip deformations and, in many cases, to permit its direct evaluation. This averaged measure of the near tip field leads to approximate solutions for several strain-concentration problems. Contained perfectly plastic deformation near a crack tip is analyzed for the plane-strain case with the aid of the slip-line theory. Near tip stresses are shown to be significantly elevated by hydrostatic tension, and a strain singularity results varying inversely with distance from the tip in centered fan regions above and below the tip. Approximate estimates are given for the strain intensity, plastic zone size, and crack tip opening displacement, and the important role of large geometry changes in crack blunting is noted. Another application leads to a general solution for crack tip separations in the Barenblatt-Dugdale crack model. A proof follows on the equivalence of the Griffith energy balance and cohesive force theories of elastic brittle fracture, and hardening behavior is included in a model for plane-stress yielding. A final application leads to approximate estimates of strain concentrations at smooth-ended notch tips in elastic and elastic-plastic materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bioinspired structural materials
Wegst, U. G. K., Bai, H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2015) · Nature Materials · doi:10.1038/nmat4089 · Cited by 4,721
Mixed Mode Cracking in Layered Materials
Hutchinson, J. W., & Suo, Z. (1991) · Advances in Applied Mechanics · doi:10.1016/s0065-2156(08)70164-9 · Cited by 4,011
The mechanics of earthquakes and faulting
(1990) · Choice Reviews Online · doi:10.5860/choice.28-1579 · Cited by 3,569
Adhesion of spheres: The JKR-DMT transition using a dugdale model
Maugis, D. (1992) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(92)90285-t · Cited by 2,066
Elastic moduli of a cracked solid
Budiansky, B., & O'connell, R. J. (1976) · International Journal of Solids and Structures · doi:10.1016/0020-7683(76)90044-5 · Cited by 2,015
Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials
Camanho, P. P., Davila, C. G., & de Moura, M. F. (2003) · Journal of Composite Materials · doi:10.1177/0021998303034505 · Cited by 1,699
Dislocation nucleation from a crack tip: An analysis based on the Peierls concept
Rice, J. R. (1992) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(05)80012-2 · Cited by 1,590
Self-citationAlfano, G., & Crisfield, M. A. (2001) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.93 · Cited by 1,224
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Cohesive force across the tip of a longitudinal-shear crack and Griffith's specific surface energy
Ida, Y. (1972) · Journal of Geophysical Research · doi:10.1029/jb077i020p03796 · Cited by 1,018
A damage model for the simulation of delamination in advanced composites under variable-mode loading
Turon, A., Camanho, P. P., Costa, J., & Dávila, C. G. (2006) · Mechanics of Materials · doi:10.1016/j.mechmat.2005.10.003 · Cited by 985
The growth of slip surfaces in the progressive failure of over-consolidated clay
Palmer, A. C., & Rice, J. R. (1973) · Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences · doi:10.1098/rspa.1973.0040 · Cited by 969
Self-citationFracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
The Mechanics of Earthquakes and Faulting
Scholz, C. H. (2019) · Cambridge University Press eBooks · doi:10.1017/9781316681473 · Cited by 910
Mechanical properties of nanostructure of biological materials
Ji, B., & Gao, H. (2004) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2004.03.006 · Cited by 908
Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization
Zhu, X.-K., & Joyce, J. A. (2012) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2012.02.001 · Cited by 815
Park, K., & Paulino, G. H. (2011) · Applied Mechanics Reviews · doi:10.1115/1.4023110 · Cited by 795
Residual stress and its role in failure
Withers, P. J. (2007) · Reports on Progress in Physics · doi:10.1088/0034-4885/70/12/r04 · Cited by 730
A length scale insensitive phase-field damage model for brittle fracture
Wu, J.-Y., & Nguyen, V. P. (2018) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2018.06.006 · Cited by 662
A continuum phase field model for fracture
Kuhn, C., & Müller, R. (2010) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2010.08.009 · Cited by 635
An analysis of tensile decohesion along an interface
Needleman, A. (1990) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(90)90001-k · Cited by 628
The true toughness of human cortical bone measured with realistically short cracks
Koester, K. J., Ager, J. W., & Ritchie, R. O. (2008) · Nature Materials · doi:10.1038/nmat2221 · Cited by 558
The fracture of bulk metallic glasses
Sun, B. A., & Wang, W. H. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.002 · Cited by 522
A literature survey on fatigue analysis approaches for rubber
MARS, W., & FATEMI, A. (2002) · International Journal of Fatigue · doi:10.1016/s0142-1123(02)00008-7 · Cited by 506
A finite element formulation for nonlinear incompressible elastic and inelastic analysis
Sussman, T., & Bathe, K.-J. (1987) · Computers & Structures · doi:10.1016/0045-7949(87)90265-3 · Cited by 487
Stress corrosion theory of crack propagation with applications to geophysics
Anderson, O. L., & Grew, P. C. (1977) · Reviews of Geophysics · doi:10.1029/rg015i001p00077 · Cited by 469
THE THEORY OF SUBCRITICAL CRACK GROWTH WITH APPLICATIONS TO MINERALS AND ROCKS
Atkinson, B. K., & Meredith, P. G. (1987) · Fracture Mechanics of Rock · doi:10.1016/b978-0-12-066266-1.50009-0 · Cited by 446
Fundamentals of Fracture Mechanics
Richard, H. A., & Sander, M. (2016) · Solid Mechanics and Its Applications · doi:10.1007/978-3-319-32534-7_3 · Cited by 435
Laws of crack motion and phase-field models of fracture
Hakim, V., & Karma, A. (2009) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2008.10.012 · Cited by 405
Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair
Awaja, F., Zhang, S., Tripathi, M., Nikiforov, A., & Pugno, N. (2016) · Progress in Materials Science · doi:10.1016/j.pmatsci.2016.07.007 · Cited by 402
A Comparison of the J-lntegral and CTOD Parameters for Short Crack Specimen Testing
Sorem, W., Dodds, R., & Rolfe, S. (1991) · Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume) · doi:10.1520/stp16845s · Cited by 392
Tang, C.-S., Zhu, C., Cheng, Q., Zeng, H., Xu, J.-J., Tian, B.-G., & Shi, B. (2021) · Earth-Science Reviews · doi:10.1016/j.earscirev.2021.103586 · Cited by 390
EXPERIMENTAL FRACTURE MECHANICS DATA FOR ROCKS AND MINERALS
Atkinson, B. K., & Meredith, P. G. (1987) · Fracture Mechanics of Rock · doi:10.1016/b978-0-12-066266-1.50016-8 · Cited by 381
Elastocapillarity: Surface Tension and the Mechanics of Soft Solids
Style, R. W., Jagota, A., Hui, C.-Y., & Dufresne, E. R. (2017) · Annual Review of Condensed Matter Physics · doi:10.1146/annurev-conmatphys-031016-025326 · Cited by 381
Numerical modelling of crack propagation: automatic remeshing and comparison of different criteria
Bouchard, P. O., Bay, F., & Chastel, Y. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(03)00391-8 · Cited by 366
Adhesion and friction between a smooth elastic spherical asperity and a plane surface
Johnson, K. L. (1997) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1997.0010 · Cited by 358
Stiffening solids with liquid inclusions
Style, R. W., Boltyanskiy, R., Allen, B., Jensen, K. E., Foote, H. P., Wettlaufer, J. S., & Dufresne, E. R. (2015) · Nature Physics · doi:10.1038/nphys3181 · Cited by 346
Recent developments on damage modeling and finite element analysis for composite laminates: A review
Liu, P. F., & Zheng, J. Y. (2010) · Materials & Design · doi:10.1016/j.matdes.2010.03.031 · Cited by 325
A Review on Fatigue Life Prediction Methods for Metals
Santecchia, E., Hamouda, A. M. S., Musharavati, F., Zalnezhad, E., Cabibbo, M., El Mehtedi, M., & Spigarelli, S. (2016) · Advances in Materials Science and Engineering · doi:10.1155/2016/9573524 · Cited by 325
A Peierls criterion for the onset of deformation twinning at a crack tip
Tadmor, E. B., & Hai, S. (2003) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(03)00005-x · Cited by 307
Fracture toughness of hydrogels: measurement and interpretation
Long, R., & Hui, C.-Y. (2016) · Soft Matter · doi:10.1039/c6sm01694d · Cited by 303
Elastoplastic analysis of the peel test
Kim, K.-S., & Aravas, N. (1988) · International Journal of Solids and Structures · doi:10.1016/0020-7683(88)90071-6 · Cited by 297
Recent Developments in J Ic Testing
Landes, J., & Begley, J. (1977) · Developments in Fracture Mechanics Test Methods Standardization · doi:10.1520/stp28700s · Cited by 295
Twisting cracks in Bouligand structures
Suksangpanya, N., Yaraghi, N. A., Kisailus, D., & Zavattieri, P. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.06.010 · Cited by 294
Knowles, J. K. (1977) · International Journal of Fracture · doi:10.1007/bf00017296 · Cited by 292
Numerical Methods in Fracture Mechanics
Schmitt, W. (1987) · Ispra Courses · doi:10.1007/978-94-009-4784-9_4 · Cited by 282
Crack propagation in rubber-like materials
Persson, B. N. J., Albohr, O., Heinrich, G., & Ueba, H. (2005) · Journal of Physics: Condensed Matter · doi:10.1088/0953-8984/17/44/r01 · Cited by 281
Thermodynamics of the quasi-static growth of Griffith cracks
Rice, J. R. (1978) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(78)90014-5 · Cited by 278
Self-citationFlaw sensitivity of highly stretchable materials
Chen, C., Wang, Z., & Suo, Z. (2017) · Extreme Mechanics Letters · doi:10.1016/j.eml.2016.10.002 · Cited by 278
Functional Adhesive Surfaces with “Gecko” Effect: The Concept of Contact Splitting
Kamperman, M., Kroner, E., del Campo, A., McMeeking, R. M., & Arzt, E. (2010) · Advanced Engineering Materials · doi:10.1002/adem.201000104 · Cited by 274
Crack-growth criteria and non-linear fracture mechanics
Broberg, K. B. (1971) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(71)90008-1 · Cited by 268
The essential fracture work concept for toughness measurement of ductile polymers
Wu, J., & Mai, Y. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10626 · Cited by 265
On the Problem of Crack Extension in Brittle Solids Under General Loading
Palaniswamy, K., & Knauss, W. G. (1978) · Mechanics Today · doi:10.1016/b978-0-08-021792-5.50010-0 · Cited by 264
Effect of aging on the transverse toughness of human cortical bone: Evaluation by R-curves
Koester, K. J., Barth, H. D., & Ritchie, R. O. (2011) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2011.05.020 · Cited by 90
What's Inside the Box? – Length‐Scales that Govern Fracture Processes of Polymer Fibers
Giesa, T., Pugno, N. M., Wong, J. Y., Kaplan, D. L., & Buehler, M. J. (2014) · Advanced Materials · doi:10.1002/adma.201303323 · Cited by 47
Gauthier, R., Follet, H., Langer, M., Meille, S., Chevalier, J., Rongiéras, F., Peyrin, F., & Mitton, D. (2017) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.03.015 · Cited by 38
Metadata
- Authors
- Rice, J. R.
- Venue
- Journal of Applied Mechanics
- Publisher
- ASME International
- Published
- 1968-06-01
- Volume
- 35
- Issue
- 2
- Pages
- 379-386
- ISSN
- 0021-8936 (ISSN-L)
- 1528-9036
- OpenAlex
- W2084464066
- Cited by
- 8,421
- References
- 0
- FWCI
- 15.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.