The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Development of a Finite Element Human Head Model Partially Validated With Thirty Five Experimental Cases
Abstract
This study is aimed to develop a high quality, extensively validated finite element (FE) human head model for enhanced head injury prediction and prevention. The geometry of the model was based on computed tomography (CT) and magnetic resonance imaging scans of an adult male who has the average height and weight of an American. A feature-based multiblock technique was adopted to develop hexahedral brain meshes including the cerebrum, cerebellum, brainstem, corpus callosum, ventricles, and thalamus. Conventional meshing methods were used to create the bridging veins, cerebrospinal fluid, skull, facial bones, flesh, skin, and membranes—including falx, tentorium, pia, arachnoid, and dura. The head model has 270,552 elements in total. Thirty five loading cases were selected from a range of experimental head impacts to check the robustness of the model predictions based on responses including the brain pressure, relative skull-brain motion, skull response, and facial response. The brain pressure was validated against intracranial pressure data reported by Nahum et al. (1977, “Intracranial Pressure Dynamics During Head Impact,” Proc. 21st Stapp Car Crash Conference, SAE Technical Paper No. 770922) and Trosseille et al. (1992, “Development of a F.E.M. of the Human Head According to a Specific Test Protocol,” Proc. 36th Stapp Car Crash Conference, SAE Technical Paper No. 922527). The brain motion was validated against brain displacements under sagittal, coronal, and horizontal blunt impacts performed by Hardy et al. (2001, “Investigation of Head Injury Mechanisms Using Neutral Density Technology and High-Speed Biplanar X-Ray,” Stapp Car Crash Journal, 45, pp. 337–368; and 2007, “A Study of the Response of the Human Cadaver Head to Impact,” Stapp Car Crash Journal, 51, pp. 17–80). The facial bone responses were validated under nasal impact (Nyquist et al. 1986, “Facial Impact Tolerance and Response,” Proc. 30th Stapp Car Crash Conference, SAE Technical Paper No. 861896), zygoma and maxilla impact (Allsop et al. 1988, “Facial Impact Response – A Comparison of the Hybrid III Dummy and Human Cadaver,” Proc. 32nd Stapp Car Crash Conference, SAE Technical Paper No. 881719)]. The skull bones were validated under frontal angled impact, vertical impact, and occipital impact (Yoganandan et al. 1995, “Biomechanics of Skull Fracture,” J Neurotrauma, 12(4), pp. 659–668) and frontal horizontal impact (Hodgson et al. 1970, “Fracture Behavior of the Skull Frontal Bone Against Cylindrical Surfaces,” 14th Stapp Car Crash Conference, SAE International, Warrendale, PA). The FE head model was further used to study injury mechanisms and tolerances for brain contusion (Nahum et al. 1976, “An Experimental Model for Closed Head Impact Injury,” 20th Stapp Car Crash Conference, SAE International, Warrendale, PA). Studies from 35 loading cases demonstrated that the FE head model could predict head responses which were comparable to experimental measurements in terms of pattern, peak values, or time histories. Furthermore, tissue-level injury tolerances were proposed. A maximum principal strain of 0.42% was adopted for skull cortical layer fracture and maximum principal stress of 20 MPa was used for skull diploë layer fracture. Additionally, a plastic strain threshold of 1.2% was used for facial bone fracture. For brain contusion, 277 kPa of brain pressure was calculated from reconstruction of one contusion case.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Regional, Directional, and Age-Dependent Properties of the Brain Undergoing Large Deformation
Prange, M. T., & Margulies, S. S. (2002) · Journal of Biomechanical Engineering · doi:10.1115/1.1449907 · Cited by 635
Mechanical properties of brain tissue in tension
Miller, K., & Chinzei, K. (2002) · Journal of Biomechanics · doi:10.1016/s0021-9290(01)00234-2 · Cited by 635
Hardy, W. N., Foster, C. D., Mason, M. J., Yang, K. H., King, A. I., & Tashman, S. (2001) · SAE Technical Paper Series · doi:10.4271/2001-22-0016 · Cited by 476
Self-citationMechanical properties of cranial bone
McElhaney, J. H., Fogle, J. L., Melvin, J. W., Haynes, R. R., Roberts, V. L., & Alem, N. M. (1970) · Journal of Biomechanics · doi:10.1016/0021-9290(70)90059-x · Cited by 454
Brain tissue deforms similarly to filled elastomers and follows consolidation theory
Franceschini, G., Bigoni, D., Regitnig, P., & Holzapfel, G. A. (2006) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2006.05.004 · Cited by 385
Recent Advances in Brain Injury Research: A New Human Head Model Development and Validation
Zhang, L., Yang, K. H., Dwarampudi, R., Omori, K., Li, T., Chang, K., Hardy, W. N., Khalil, T. B., & King, A. I. (2001) · SAE Technical Paper Series · doi:10.4271/2001-22-0017 · Cited by 374
Self-citationA Study of the Response of the Human Cadaver Head to Impact
Hardy, W. N., Mason, M. J., Foster, C. D., Shah, C. S., Kopacz, J. M., Yang, K. H., King, A. I., Bishop, J., Bey, M., Anderst, W., et al. (2007) · SAE Technical Paper Series · doi:10.4271/2007-22-0002 · Cited by 371
Self-citationOn the Development of the SIMon Finite Element Head Model
Takhounts, E. G., Eppinger, R. H., Campbell, J. Q., Tannous, R. E., Power, E. D., & Shook, L. S. (2003) · SAE Technical Paper Series · doi:10.4271/2003-22-0007 · Cited by 350
Fifty years of brain tissue mechanical testing: From in vitro to in vivo investigations
Chatelin, S., Constantinesco, A., & Willinger, R. (2010) · Biorheology: The Official Journal of the International Society of Biorheology · doi:10.3233/bir-2010-0576 · Cited by 342
Microsurgical Anatomy of the Superficial Veins of the Cerebrum
Oka, K., Rhoton, A. L., Barry, M., & Rodriguez, R. (1985) · Neurosurgery · doi:10.1227/00006123-198511000-00003 · Cited by 275
Dynamic response of human cranial bone
Wood, J. L. (1971) · Journal of Biomechanics · doi:10.1016/0021-9290(71)90010-8 · Cited by 248
Three-Dimensional Human Head Finite-Element Model Validation Against Two Experimental Impacts
Willinger, R., Kang, H.-S., & Diaw, B. (1999) · Annals of Biomedical Engineering · doi:10.1114/1.165 · Cited by 222
Why do bridging veins rupture into the virtual subdural space?
Yamashima, T., & Friede, R. L. (1984) · Journal of Neurology, Neurosurgery & Psychiatry · doi:10.1136/jnnp.47.2.121 · Cited by 216
Nonlinear viscoelastic effects in oscillatory shear deformation of brain tissue
Darvish, K. K., & Crandall, J. R. (2001) · Medical Engineering & Physics · doi:10.1016/s1350-4533(01)00101-1 · Cited by 198
Shear linear behavior of brain tissue over a large frequency range
Nicolle, S., Lounis, M., Willinger, R., & Palierne, J. ‐. (2005) · Biorheology: The Official Journal of the International Society of Biorheology · doi:10.1177/0006355x2005042003003 · Cited by 176
Age-Dependent Regional Mechanical Properties of the Rat Hippocampus and Cortex
Elkin, B. S., Ilankovan, A., & Morrison, B. (2010) · Journal of Biomechanical Engineering · doi:10.1115/1.4000164 · Cited by 166
Development of a Full Body CAD Dataset for Computational Modeling: A Multi-modality Approach
Gayzik, F. S., Moreno, D. P., Geer, C. P., Wuertzer, S. D., Martin, R. S., & Stitzel, J. D. (2011) · Annals of Biomedical Engineering · doi:10.1007/s10439-011-0359-5 · Cited by 165
Lee, M.-C., & Haut, R. C. (1989) · Journal of Biomechanics · doi:10.1016/0021-9290(89)90005-5 · Cited by 159
Cloots, R. J. H., Gervaise, H. M. T., van Dommelen, J. A. W., & Geers, M. G. D. (2008) · Annals of Biomedical Engineering · doi:10.1007/s10439-008-9510-3 · Cited by 151
Mechanics of acute subdural hematomas resulting from bridging vein rupture
Depreitere, B. P., Lierde, C. V., Sloten, J. V., et al. (2006) · Journal of neurosurgery · doi:10.3171/jns.2006.104.6.950 · Cited by 144
Facial Impact Response — A Comparison of the Hybrid III Dummy and Human Cadaver
Allsop, D. “., Warner, C. Y., Wille, M. G., Schneider, D. C., & Nahum, A. M. (1988) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/881719 · Cited by 134
Can sulci protect the brain from traumatic injury?
Ho, J. S., & Kleiven, S. (2009) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.06.051 · Cited by 121
Al-Bsharat, A. S., Hardy, W. N., Yang, K. H., Khalil, T. B., Tashman, S., & King, A. I. (1999) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/99sc22 · Cited by 116
Self-citationDynamic response of the brain with vasculature: A three-dimensional computational study
Ho, J. S., & Kleiven, S. (2007) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2007.02.011 · Cited by 101
A Detailed Viscoelastic Characterization of the P17 and Adult Rat Brain
Elkin, B. S., Ilankovan, A., & Morrison, B. (2011) · Journal of Neurotrauma · doi:10.1089/neu.2010.1604 · Cited by 99
Computational Study of the Contribution of the Vasculature on the Dynamic Response of the Brain
Zhang, L., Bae, J., Hardy, W. N., et al. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-22-0008 · Cited by 84
Self-citationHan, H., Tao, W., & Zhang, M. (2007) · Neuroradiology · doi:10.1007/s00234-006-0175-z · Cited by 76
Brain Tissue Mechanical Properties
Bilston, L. E. (2011) · Biological and medical physics series · doi:10.1007/978-1-4419-9997-9_4 · Cited by 64
An interactive multiblock approach to meshing the spine
Kallemeyn, N. A., Tadepalli, S. C., Shivanna, K. H., & Grosland, N. M. (2009) · Computer Methods and Programs in Biomedicine · doi:10.1016/j.cmpb.2009.03.005 · Cited by 53
Development and Validation of an Occupant Lower Limb Finite Element Model
Yue, N., Shin, J., & Untaroiu, C. D. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-01-1128 · Cited by 26
Cited by
Development of Brain Injury Criteria (BrIC)
Takhounts, E. G., Craig, M. J., Moorhouse, K., McFadden, J., & Hasija, V. (2013) · SAE Technical Paper Series · doi:10.4271/2013-22-0010 · Cited by 455
Metadata
- Authors
- Mao, H., Zhang, L., Jiang, B., Genthikatti, V. V., Jin, X., Zhu, F., Makwana, R., Gill, A., Jandir, G., Singh, A., & Yang, K. H.
- Venue
- Journal of Biomechanical Engineering
- Publisher
- ASME International
- Published
- 2013-09-24
- Volume
- 135
- Issue
- 11
- Pages
- 111002-111002
- ISSN
- 0148-0731 (ISSN-L)
- 1528-8951
- OpenAlex
- W2003449118
- Cited by
- 369
- References
- 30
- FWCI
- 12.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.