The DOI matches its Crossref record.
Plasma etching—A discussion of mechanisms
Abstract
The purpose of the present paper is to review the salient features of our understanding of phenomena which occur in plasma etching situations. The etching process is discussed in terms of three basic steps: adsorption, product formation, and product desorption. Experiments performed in well-defined (nonplasma) environments are discussed with the goal of clarifying the relative importance of these three steps in the etching process. An attempt is made to relate the resulting concepts to several phenomena generally observed in plasma situations (e.g. etching anisotropy, selective etching, the loading effect, and the role of additive gases). Moreover, the glow discharge, in addition to generating active species which initiate the chemical reactions, also causes the etched surface to be subjected to energetic particle (ions, electrons) bombardment. The role of this radiation in the etching process is emphasized. Speculative comments relating to plasma etching parameters and apparatus are also given.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Plasma etching: Yesterday, today, and tomorrow
Donnelly, V. M., & Kornblit, A. (2013) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4819316 · Cited by 880
Bulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
Etch rates for micromachining processing
Williams, K. R., & Muller, R. S. (1996) · Journal of Microelectromechanical Systems · doi:10.1109/84.546406 · Cited by 646
Ultra-low-loss on-chip resonators with sub-milliwatt parametric oscillation threshold
Ji, X., Barbosa, F. A. S., Roberts, S. P., Dutt, A., Cardenas, J., Okawachi, Y., Bryant, A., Gaeta, A. L., & Lipson, M. (2017) · Optica · doi:10.1364/optica.4.000619 · Cited by 552
Plasma nanoscience: from nano-solids in plasmas to nano-plasmas in solids
Ostrikov, K., Neyts, E. C., & Meyyappan, M. (2013) · Advances in Physics · doi:10.1080/00018732.2013.808047 · Cited by 513
Surface science aspects of etching reactions
Winters, H. F., & Coburn, J. W. (1992) · Surface Science Reports · doi:10.1016/0167-5729(92)90009-z · Cited by 502
Self-citationA survey on the reactive ion etching of silicon in microtechnology
Jansen, H., Gardeniers, H., Boer, M. D., Elwenspoek, M., & Fluitman, J. (1996) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/6/1/002 · Cited by 481
Laser-induced gas-surface interactions
Chuang, T. J. (1983) · Surface Science Reports · doi:10.1016/0167-5729(83)90005-5 · Cited by 416
A Continuum Model of DC and RF Discharges
Graves, D. B., & Jensen, K. F. (1986) · IEEE Transactions on Plasma Science · doi:10.1109/tps.1986.4316510 · Cited by 357
Sakudo, A., Yagyu, Y., & Onodera, T. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20205216 · Cited by 341
Schaepkens, M., Standaert, T. E. F. M., Rueger, N. R., Sebel, P. G. M., Oehrlein, G. S., & Cook, J. M. (1999) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.582108 · Cited by 319
Vogel, N., Goerres, S., Landfester, K., & Weiss, C. K. (2011) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100187 · Cited by 278
Holste, K., Dietz, P., Scharmann, S., Keil, K., Henning, T., Zschätzsch, D., Reitemeyer, M., Nauschütt, B., Kiefer, F., Kunze, F., et al. (2020) · Review of Scientific Instruments · doi:10.1063/5.0010134 · Cited by 207
Improved coherence in optically defined niobium trilayer-junction qubits
Anferov, A., Lee, K.-H., Zhao, F., Simon, J., & Schuster, D. I. (2024) · Physical Review Applied · doi:10.1103/physrevapplied.21.024047 · Cited by 41
Metadata
- Authors
- Coburn, J. W., & Winters, H. F.
- Venue
- Journal of Vacuum Science and Technology
- Publisher
- American Vacuum Society
- Published
- 1979-03-01
- Volume
- 16
- Issue
- 2
- Pages
- 391-403
- ISSN
- 0022-5355 (ISSN-L)
- OpenAlex
- W2094427838
- Cited by
- 613
- References
- 0
- FWCI
- 26.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.