The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
The search for novel, superhard materials
Abstract
The recent development in the field of superhard materials with Vickers hardness of ⩾40 GPa is reviewed. Two basic approaches are outlined including the intrinsic superhard materials, such as diamond, cubic boron nitride, C3N4, carbonitrides, etc. and extrinsic, nanostructured materials for which superhardness is achieved by an appropriate design of their microstructure. The theoretically predicted high hardness of C3N4 has not been experimentally documented so far. Ceramics made of cubic boron nitride prepared at high pressure and temperature find many applications whereas thin films prepared by activated deposition from the gas phase are still in the stage of fundamental development. The greatest progress has been achieved in the field of nanostructured materials including superlattices and nanocomposites where superhardness of ⩾50 GPa was reported for several systems. More recently, nc-TiN/SiNx nanocomposites with hardness of 105 GPa were prepared, reaching the hardness of diamond. The principles of design for these materials are summarized and some unresolved questions outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Semiconductor Clusters, Nanocrystals, and Quantum Dots
Alivisatos, A. P. (1996) · Science · doi:10.1126/science.271.5251.933 · Cited by 11,528
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
A method for interpreting the data from depth-sensing indentation instruments
Doerner, M. F., & Nix, W. D. (1986) · Journal of Materials Research · doi:10.1557/jmr.1986.0601 · Cited by 2,863
Prediction of New Low Compressibility Solids
Liu, A. Y., & Cohen, M. L. (1989) · Science · doi:10.1126/science.245.4920.841 · Cited by 2,681
Softening of nanocrystalline metals at very small grain sizes
Schiøtz, J., Di Tolla, F. D., & Jacobsen, K. W. (1998) · Nature · doi:10.1038/35328 · Cited by 1,733
Pharr, G. M., Oliver, W. C., & Brotzen, F. R. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.0613 · Cited by 1,562
On the validity of the hall-petch relationship in nanocrystalline materials
Chokshi, A. H., Rosen, A., Karch, J., & Gleiter, H. (1989) · Scripta Metallurgica · doi:10.1016/0036-9748(89)90342-6 · Cited by 1,214
Material selection for hard coatings
Holleck, H. (1986) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.573700 · Cited by 1,193
Size effects in materials due to microstructural and dimensional constraints: a comparative review
Arzt, E. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00231-6 · Cited by 1,180
Ion-Beam Deposition of Thin Films of Diamondlike Carbon
Aisenberg, S., & Chabot, R. (1971) · Journal of Applied Physics · doi:10.1063/1.1660654 · Cited by 1,168
Calculation of bulk moduli of diamond and zinc-blende solids
Cohen, M. L. (1985) · Physical Review B · doi:10.1103/physrevb.32.7988 · Cited by 1,139
Measurement of mechanical properties by ultra-low load indentation
Pharr, G. M. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(98)00724-2 · Cited by 1,088
A first report on deformation-mechanism maps
Ashby, M. F. (1972) · Acta Metallurgica · doi:10.1016/0001-6160(72)90082-x · Cited by 1,031
The relation between polycrystal deformation and single-crystal deformation
Kocks, U. F. (1970) · Metallurgical Transactions · doi:10.1007/bf02900224 · Cited by 1,017
A concept for the design of novel superhard coatings
Veprek, S., & Reiprich, S. (1995) · Thin Solid Films · doi:10.1016/0040-6090(95)06695-0 · Cited by 981
Elastic and tensile behavior of nanocrystalline copper and palladium
Sanders, P. G., Eastman, J. A., & Weertman, J. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00092-x · Cited by 858
Superhard and Elastic Carbon Nitride Thin Films Having Fullerenelike Microstructure
Sjöström, H., Stafström, S., Boman, M., & Sundgren, J. ‐. (1995) · Physical Review Letters · doi:10.1103/physrevlett.75.1336 · Cited by 666
Multilayer PVD coatings for wear protection
Holleck, H., & Schier, V. (1995) · Surface and Coatings Technology · doi:10.1016/0257-8972(95)02555-3 · Cited by 521
Veprek, S., Sarott, F.-A., & Iqbal, Z. (1987) · Physical review. B, Condensed matter · doi:10.1103/physrevb.36.3344 · Cited by 434
Carbon nitride deposited using energetic species: A review on XPS studies
Ronning, C., Feldermann, H., Merk, R., Hofsäss, H. C., Reinke, P., & Thiele, J.-U. (1998) · Physical review. B, Condensed matter · doi:10.1103/physrevb.58.2207 · Cited by 424
Growth of Diamond Seed Crystals by Vapor Deposition
Angus, J. C., Will, H., & Stanko, W. S. (1968) · Journal of Applied Physics · doi:10.1063/1.1656693 · Cited by 403
Self-assembly of single electron transistors and related devices
L. Feldheim, D., & D. Keating, C. (1998) · Chemical Society Reviews · doi:10.1039/a827001z · Cited by 388
Growth, structure, and microhardness of epitaxial TiN/NbN superlattices
Shinn, M., Hultman, L., & Barnett, S. A. (1992) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1992.0901 · Cited by 374
Mechanical properties of nanophase metals
Siegel, R. W., & Fougere, G. E. (1995) · Nanostructured Materials · doi:10.1016/0965-9773(95)00044-5 · Cited by 370
Deviations from hall-petch behaviour in as-prepared nanocrystalline nickel
El-Sherik, A. M., Erb, U., Palumbo, G., & Aust, K. T. (1992) · Scripta Metallurgica et Materialia · doi:10.1016/0956-716x(92)90596-7 · Cited by 324
The strength of nanocrystalline metals with and without flaws
Sanders, P. G., Youngdahl, C. J., & Weertman, J. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00185-8 · Cited by 274
Microhardness of nanocrystalline palladium and copper produced by inert-gas condensation
Nieman, G. W., Weertman, J., & Siegel, R. W. (1989) · Scripta Metallurgica · doi:10.1016/0036-9748(89)90223-8 · Cited by 245
Load-adaptive crystalline–amorphous nanocomposites
Voevodin, A. A., & Zabinski, J. S. (1998) · Journal of Materials Science · doi:10.1023/a:1004307426887 · Cited by 216
Deposition and properties of polycrystalline TiN/NbN superlattice coatings
Chu, X., Wong, M., Sproul, W. D., Rohde, S. L., & Barnett, S. A. (1992) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.578030 · Cited by 189
A simple, mixtures-based model for the grain size dependence of strength in nanophase metals
Carsley, J. E., Ning, J., Milligan, W. W., Hackney, S. A., & Aifantis, E. C. (1995) · Nanostructured Materials · doi:10.1016/0965-9773(95)00257-f · Cited by 166
The Synthesis of Diamond at Low Pressure
Derjaguin, B. V., & Fedoseev, D. B. (1975) · Scientific American · doi:10.1038/scientificamerican1175-102 · Cited by 127
Holleck, H., & Schulz, H. (1988) · Surface and Coatings Technology · doi:10.1016/0257-8972(88)90011-4 · Cited by 101
Abrasive and erosive wear tests for thin coatings: a unified approach
Hutchings, I. M. (1998) · Tribology International · doi:10.1016/s0301-679x(98)00004-8 · Cited by 81
Grain Size Dependent Mechanical Properties in Nanophase Materials
Siegel, R. W., & Fougere, G. E. (1994) · MRS Proceedings · doi:10.1557/proc-362-219 · Cited by 46
Корсунский, Б. Л., & Pepekin, V. I. (1997) · Russian Chemical Reviews · doi:10.1070/rc1997v066n11abeh000378 · Cited by 40
Cited by
Leyland, A., & Matthews, A. (2000) · Wear · doi:10.1016/s0043-1648(00)00488-9 · Cited by 3,103
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Microstructural design of hard coatings
Mayrhofer, P. H., Mitterer, C., Hultman, L., & Clemens, H. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.002 · Cited by 1,008
Nanocrystalline materials and coatings
Tjong, S. C., & Chen, H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.07.001 · Cited by 928
Metadata
- Authors
- Vepřek, S.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 1999-09-01
- Volume
- 17
- Issue
- 5
- Pages
- 2401-2420
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2153703866
- Cited by
- 1,208
- References
- 37
- FWCI
- 33.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.