The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
The search for novel, superhard materials
Abstract
The recent development in the field of superhard materials with Vickers hardness of ⩾40 GPa is reviewed. Two basic approaches are outlined including the intrinsic superhard materials, such as diamond, cubic boron nitride, C3N4, carbonitrides, etc. and extrinsic, nanostructured materials for which superhardness is achieved by an appropriate design of their microstructure. The theoretically predicted high hardness of C3N4 has not been experimentally documented so far. Ceramics made of cubic boron nitride prepared at high pressure and temperature find many applications whereas thin films prepared by activated deposition from the gas phase are still in the stage of fundamental development. The greatest progress has been achieved in the field of nanostructured materials including superlattices and nanocomposites where superhardness of ⩾50 GPa was reported for several systems. More recently, nc-TiN/SiNx nanocomposites with hardness of 105 GPa were prepared, reaching the hardness of diamond. The principles of design for these materials are summarized and some unresolved questions outlined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Semiconductor Clusters, Nanocrystals, and Quantum Dots
Alivisatos, A. P. (1996) · Science · doi:10.1126/science.271.5251.933 · Cited by 11,528
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
A method for interpreting the data from depth-sensing indentation instruments
Doerner, M. F., & Nix, W. D. (1986) · Journal of Materials Research · doi:10.1557/jmr.1986.0601 · Cited by 2,863
Prediction of New Low Compressibility Solids
Liu, A. Y., & Cohen, M. L. (1989) · Science · doi:10.1126/science.245.4920.841 · Cited by 2,681
Softening of nanocrystalline metals at very small grain sizes
Schiøtz, J., Di Tolla, F. D., & Jacobsen, K. W. (1998) · Nature · doi:10.1038/35328 · Cited by 1,733
Pharr, G. M., Oliver, W. C., & Brotzen, F. R. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.0613 · Cited by 1,562
On the validity of the hall-petch relationship in nanocrystalline materials
Chokshi, A. H., Rosen, A., Karch, J., & Gleiter, H. (1989) · Scripta Metallurgica · doi:10.1016/0036-9748(89)90342-6 · Cited by 1,214
Material selection for hard coatings
Holleck, H. (1986) · Journal of Vacuum Science & Technology A Vacuum Surfaces and Films · doi:10.1116/1.573700 · Cited by 1,193
Cited by
Leyland, A., & Matthews, A. (2000) · Wear · doi:10.1016/s0043-1648(00)00488-9 · Cited by 3,103
Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems
Ferrari, A. C., Bonaccorso, F., Fal'ko, V., Novoselov, K. S., Roche, S., Bøggild, P., Borini, S., Koppens, F. H. L., Palermo, V., Pugno, N., et al. (2015) · Nanoscale · doi:10.1039/c4nr01600a · Cited by 3,027
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Microstructural design of hard coatings
Mayrhofer, P. H., Mitterer, C., Hultman, L., & Clemens, H. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.002 · Cited by 1,008
Nanocrystalline materials and coatings
Tjong, S. C., & Chen, H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.07.001 · Cited by 928
New materials from high-pressure experiments
McMillan, P. F. (2002) · Nature Materials · doi:10.1038/nmat716 · Cited by 569
Plasma deposition of optical films and coatings: A review
Martinu, L., & Poitras, D. (2000) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1314395 · Cited by 559
Historical developments and new trends in tribological and solid lubricant coatings
Donnet, C., & Erdemir, A. (2004) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2003.10.022 · Cited by 558
Stampfl, C., Mannstadt, W., Asahi, R., & Freeman, A. J. (2001) · Physical Review B · doi:10.1103/physrevb.63.155106 · Cited by 533
Recent advances of superhard nanocomposite coatings: a review
Zhang, S., Sun, D., Fu, Y., & Du, H. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00903-9 · Cited by 492
Industrial applications of superhard nanocomposite coatings
Veprek, S., & Veprek-Heijman, M. J. G. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2008.05.038 · Cited by 420
High Lattice Thermal Conductivity Solids
Morelli, D. T., & Slack, G. A. (2006) · High Thermal Conductivity Materials · doi:10.1007/0-387-25100-6_2 · Cited by 407
Nanocomposite and nanostructured tribological materials for space applications
VOEVODIN, A., & ZABINSKI, J. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.10.008 · Cited by 371
The challenge of ceramic/metal microcomposites and nanocomposites
Moya, J. S., Lopez-Esteban, S., & Pecharromán, C. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.09.003 · Cited by 358
Preparation and characterization of AlCrTaTiZr multi-element nitride coatings
Lai, C.-H., Lin, S.-J., Yeh, J.-W., & Chang, S.-Y. (2006) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2006.06.048 · Cited by 353
Vladimirov, S. V., & Ostrikov, K. (2004) · Physics Reports · doi:10.1016/j.physrep.2003.12.003 · Cited by 332
Nanostructured multi-element (TiZrNbHfTa)N and (TiZrNbHfTa)C hard coatings
Braic, V., Vladescu, A., Balaceanu, M., Luculescu, C. R., & Braic, M. (2012) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2011.09.033 · Cited by 309
Prediction of Glass Hardness Using Temperature-Dependent Constraint Theory
Smedskjaer, M. M., Mauro, J. C., & Yue, Y. (2010) · Physical Review Letters · doi:10.1103/physrevlett.105.115503 · Cited by 270
Nanocomposite Coatings: Preparation, Characterization, Properties, and Applications
Nguyen-Tri, P., Nguyen, T. A., Carriere, P., & Ngo Xuan, C. (2018) · International Journal of Corrosion · doi:10.1155/2018/4749501 · Cited by 267
de Jong, M., Chen, W., Notestine, R., Persson, K., Ceder, G., Jain, A., Asta, M., & Gamst, A. (2016) · Scientific Reports · doi:10.1038/srep34256 · Cited by 243
On the reliability of the measurements of mechanical properties of superhard coatings
Veprek, S., Mukherjee, S., Männling, H.-D., & He, J. (2003) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(02)00195-8 · Cited by 33
Self-citation
Metadata
- Authors
- Vepřek, S.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 1999-09-01
- Volume
- 17
- Issue
- 5
- Pages
- 2401-2420
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2153703866
- Cited by
- 1,208
- References
- 37
- FWCI
- 33.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.