The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
The importance of rheological behavior in the additive manufacturing technique material extrusion
Abstract
Material extrusion (ME), sometimes called Fused Deposition Modeling® or Fused Filament Fabrication, is an additive manufacturing technique that places order 300 μm diameter molten polymer filaments sequentially onto a moving substrate to build an object. The feed material is a solid fiber that acts like a continuous piston in a heated barrel, which plasticates itself to push molten material through a nozzle. The barrel pressure is substantial, of order 30 MPa (≈4000 psi), and similar to that developed in contemporary polymer processing. The similarity does not end here with all the non-Newtonian and viscoelastic effects and heat transfer limitations that challenge extrusion operations coming to bear in the ME. These will be discussed in this review with suggestions of areas of study.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Reptation of a Polymer Chain in the Presence of Fixed Obstacles
de Gennes, P. G. (1971) · The Journal of Chemical Physics · doi:10.1063/1.1675789 · Cited by 4,284
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.-K., Asahara, H., Horiguchi, K., Nakamura, T., Todoroki, A., & Hirano, Y. (2016) · Scientific Reports · doi:10.1038/srep23058 · Cited by 1,171
A theory crack healing in polymers
Wool, R. P., & O’Connor, K. M. (1981) · Journal of Applied Physics · doi:10.1063/1.328526 · Cited by 1,093
Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
Huang, Y., Leu, M. C., Mazumder, J., & Donmez, A. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028725 · Cited by 947
Isothermals, isopiestics and isometrics relative to viscosity
Barus, C. (1893) · American Journal of Science · doi:10.2475/ajs.s3-45.266.87 · Cited by 662
(1945) · Medical Entomology and Zoology · Cited by 618
Converging flow of polymer melts in extrusion dies
Cogswell, F. N. (1972) · Polymer Engineering & Science · doi:10.1002/pen.760120111 · Cited by 610
The statistical mechanics of polymerized material
Edwards, S. F. (1967) · Proceedings of the Physical Society · doi:10.1088/0370-1328/92/1/303 · Cited by 578
Cited by
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Fused filament fabrication of polymer materials: A review of interlayer bond
Gao, X., Qi, S., Kuang, X., Su, Y., Li, J., & Wang, D. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2020.101658 · Cited by 418
Das, A., Gilmer, E. L., Biria, S., & Bortner, M. J. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c01228 · Cited by 305
Outrequin, T. C. R., Gamonpilas, C., Siriwatwechakul, W., & Sreearunothai, P. (2023) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2022.111371 · Cited by 113
Metadata
- Authors
- Mackay, M. E.
- Venue
- Journal of Rheology
- Publisher
- Society of Rheology
- Published
- 2018-11-01
- Volume
- 62
- Issue
- 6
- Pages
- 1549-1561
- ISSN
- 0097-0360 (ISSN-L)
- 0148-6055
- 1520-8516
- OpenAlex
- W2900168947
- Cited by
- 266
- References
- 24
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The importance of rheological behavior in the additive manufacturing technique material extrusion. https://app.cochat.ai/papers/10.1122/1.5037687
- The paper
- Mackay, M. E. (2018). The importance of rheological behavior in the additive manufacturing technique material extrusion. Journal of Rheology. https://doi.org/10.1122/1.5037687
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.