CoChat

The SARS-CoV-2 Spike variant D614G favors an open conformational state

Open access

Published version of a preprint

The DOI matches its Crossref record; 62 of the 62 references it cites were found in a registry or an index.

Abstract

Symmetrization of contacts in D614G SARS-CoV-2 Spike favors greater probability of infection-capable conformation.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1126/sciadv.abf3671

Cites

62 of 62 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Structural representation of the Spike protein. (A) The Spike complex is shown in the all-down conformation. Its S1 and S2 subunits are depicted in red and blue. (B) The Spike complex is shown in the one-up conformation. It is composed of three protomers, with the L-down protomer depicted in purple, the Up protomer in orange, and the R-down protomer in cyan. The white dashed circle indicates a D614G site. Here, only one of the three D614G sites is shown. (C) Definition of 12 domains and their residues used for analysis of simulations. It was necessary to define domains for every region for analysis, so some regions may have arbitrarily assigned names or the defined regions may not follow canonical sequence ranges. We display the domains highlighted in the Spike structure, shown from two different perspectives. Definitions of domain abbreviations: NTD, N-terminal domain; CT0, C-terminal domain 0; CT1, C-terminal domain 1; CT2, C-terminal domain 2; S2S2′, S1/S2 cleavage to S2′; FP, fusion peptide; FPR, fusion peptide region; HR1, heptad repeat 1; CH, center helix; CD, connector domain; and CD1, connector domain 1. Images in (A) and (B) were created with PyMOL (51); images in (C) were prepared using VMD (45).
Fig. 1 Structural representation of the Spike protein. (A) The Spike complex is shown in the all-down conformation. Its S1 and S2 subunits are depicted in red and blue. (B) The Spike complex is shown in the one-up conformation. It is composed of three protomers, with the L-down protomer depicted in purple, the Up protomer in orange, and the R-down protomer in cyan. The white dashed circle indicates a D614G site. Here, only one of the three D614G sites is shown. (C) Definition of 12 domains and their residues used for analysis of simulations. It was necessary to define domains for every region for analysis, so some regions may have arbitrarily assigned names or the defined regions may not follow canonical sequence ranges. We display the domains highlighted in the Spike structure, shown from two different perspectives. Definitions of domain abbreviations: NTD, N-terminal domain; CT0, C-terminal domain 0; CT1, C-terminal domain 1; CT2, C-terminal domain 2; S2S2′, S1/S2 cleavage to S2′; FP, fusion peptide; FPR, fusion peptide region; HR1, heptad repeat 1; CH, center helix; CD, connector domain; and CD1, connector domain 1. Images in (A) and (B) were created with PyMOL (51); images in (C) were prepared using VMD (45).CC BY-NC · PubMed Central
Fig. 2 D614G substitution alters inter-protomer interactions between S1 and S2 subunits. (A and B) Total number of contacts formed at S1-S2 interfaces (A) in the all-down system and (B) in the one-up system. Appropriate labeling and dashed lines indicate intra-protomer and inter-protomer S1-S2 interactions. For each set of simulations, error bars were calculated as standard error across five replicas. In the x axis of all panels, “L” denotes the L-down protomer, “U” represents the Up protomer, and “R” denotes the R-down protomer. For instance, LS1-U2 represents the interactions between the S1 region of the L-down protomer and the S2 region of the Up protomer.
Fig. 2 D614G substitution alters inter-protomer interactions between S1 and S2 subunits. (A and B) Total number of contacts formed at S1-S2 interfaces (A) in the all-down system and (B) in the one-up system. Appropriate labeling and dashed lines indicate intra-protomer and inter-protomer S1-S2 interactions. For each set of simulations, error bars were calculated as standard error across five replicas. In the x axis of all panels, “L” denotes the L-down protomer, “U” represents the Up protomer, and “R” denotes the R-down protomer. For instance, LS1-U2 represents the interactions between the S1 region of the L-down protomer and the S2 region of the Up protomer.CC BY-NC · PubMed Central
Fig. 3 S1-S1 and S2-S2 contacts. Average total number of contacts at the S1-S1 and S2-S2 interfaces in (A) the all-down system and (B) the one-up system. For each set of simulations, error bars were calculated as standard error across five replicas. In the x axis of all panels, “L” denotes the L-down protomer, “U” represents the Up protomer, and “R” denotes the R-down protomer. For instance, LS1-US1 represents the interactions between the S1 region of the L-down protomer and the S1 region of the Up protomer.
Fig. 3 S1-S1 and S2-S2 contacts. Average total number of contacts at the S1-S1 and S2-S2 interfaces in (A) the all-down system and (B) the one-up system. For each set of simulations, error bars were calculated as standard error across five replicas. In the x axis of all panels, “L” denotes the L-down protomer, “U” represents the Up protomer, and “R” denotes the R-down protomer. For instance, LS1-US1 represents the interactions between the S1 region of the L-down protomer and the S1 region of the Up protomer.CC BY-NC · PubMed Central
Fig. 4 Residue-residue cross-correlation matrices and hydrogen bonding. (A) G614 form one-up. (B) D614 form one-up. In the x and y axes, L-RBD, U-RBD, and R-RBD denote RBD regions of the L-down, Up, and R-down protomers, respectively. (C) Hydrogen bond occupancy for critical residue pairs located between protomers. Occupancies were calculated for the Asp614/Gly614-Thr859 pair and the Gln613-Thr859 pair. For each system, error bars were calculated as standard error over five replicas. In all subpanels, “L” represents the L-down protomer, “U” denotes the Up protomer, and “R” represents the R-down protomer. For example, “LU” denotes the bonding between L and U protomers. In (A) and (B), red denotes positive and blue denotes negative cross-correlations. The color scale shows the range of correlations that increases from no correlation (0.00, white) to perfect positive correlation (dark blue, 1.00) or perfect negative correlation (dark red, −1.00). The higher the intensity of the pixels, the stronger the magnitude of correlations.
Fig. 4 Residue-residue cross-correlation matrices and hydrogen bonding. (A) G614 form one-up. (B) D614 form one-up. In the x and y axes, L-RBD, U-RBD, and R-RBD denote RBD regions of the L-down, Up, and R-down protomers, respectively. (C) Hydrogen bond occupancy for critical residue pairs located between protomers. Occupancies were calculated for the Asp614/Gly614-Thr859 pair and the Gln613-Thr859 pair. For each system, error bars were calculated as standard error over five replicas. In all subpanels, “L” represents the L-down protomer, “U” denotes the Up protomer, and “R” represents the R-down protomer. For example, “LU” denotes the bonding between L and U protomers. In (A) and (B), red denotes positive and blue denotes negative cross-correlations. The color scale shows the range of correlations that increases from no correlation (0.00, white) to perfect positive correlation (dark blue, 1.00) or perfect negative correlation (dark red, −1.00). The higher the intensity of the pixels, the stronger the magnitude of correlations.CC BY-NC · PubMed Central
Fig. 5 Residue-residue cross-correlation matrices. (A) G-form all-down. (B) D-form all-down. In the x and y axes, L-RBD, U-RBD, and R-RBD denote RBD regions of the L-down, Up, and R-down protomers, respectively. Red denotes positive and blue denotes negative cross-correlations. The color scale shows the range of correlations that increases from no correlation (0.00, white) to perfect positive correlation (dark blue, 1.00) or perfect negative correlation (dark red, −1.00). The higher the intensity of the pixels, the stronger the magnitude of correlations. The diagonal blocks (top left to bottom right) denote high intra-domain correlation and therefore have intense red pixelation. Inter-domain off-diagonal blocks have relatively stronger (though slightly asymmetric) correlations in G-form down (left) as compared to D-form down (right).
Fig. 5 Residue-residue cross-correlation matrices. (A) G-form all-down. (B) D-form all-down. In the x and y axes, L-RBD, U-RBD, and R-RBD denote RBD regions of the L-down, Up, and R-down protomers, respectively. Red denotes positive and blue denotes negative cross-correlations. The color scale shows the range of correlations that increases from no correlation (0.00, white) to perfect positive correlation (dark blue, 1.00) or perfect negative correlation (dark red, −1.00). The higher the intensity of the pixels, the stronger the magnitude of correlations. The diagonal blocks (top left to bottom right) denote high intra-domain correlation and therefore have intense red pixelation. Inter-domain off-diagonal blocks have relatively stronger (though slightly asymmetric) correlations in G-form down (left) as compared to D-form down (right).CC BY-NC · PubMed Central
Fig. 6 Domain-domain contact gain and loss for LS1-US2 and US1-RS2 interfaces. (A and C) Average number of contacts gained between forms by each system in terms of domain-domain interactions. Each bar represents the average number of contacts gained by the system in question between the two domains listed on the x axis. To calculate this, we sum up the number of newly-formed contacts in each form in comparison to the other. Purple asterisks represent the three interfaces with the greatest differences. (B and D) Image of the two interfaces in question, with all three protomers shown as different colored surfaces, the domains involved in gain or loss shown as transparent surfaces with cartoon representations beneath, and the specific residues involved in the highest-frequency changing contact shown as spheres. Images rendered with PyMOL (51).
Fig. 6 Domain-domain contact gain and loss for LS1-US2 and US1-RS2 interfaces. (A and C) Average number of contacts gained between forms by each system in terms of domain-domain interactions. Each bar represents the average number of contacts gained by the system in question between the two domains listed on the x axis. To calculate this, we sum up the number of newly-formed contacts in each form in comparison to the other. Purple asterisks represent the three interfaces with the greatest differences. (B and D) Image of the two interfaces in question, with all three protomers shown as different colored surfaces, the domains involved in gain or loss shown as transparent surfaces with cartoon representations beneath, and the specific residues involved in the highest-frequency changing contact shown as spheres. Images rendered with PyMOL (51).CC BY-NC · PubMed Central
Fig. 7 RBD is more exposed in the one-up conformation. (A) Surface representation of the all-down Spike complex. Colors ranging between red, white, and blue represent values for the GEF. GEF describes relative exposure and coverage of protein surfaces. (B) Surface representation of the one-up Spike. Colors ranging between cyan, white, and magenta indicate GEF differences between the closed and open structures. The RBD in the up orientation is indicated by the dotted circle, where the originally buried (magenta) region around 458 to 478 is now exposed. (C and D) Top view of the Spike protein apex in (C) all-down and (D) one-up conformations. Protein surface is shown in gray. Glycan ensembles covering the protein surface are represented by point densities. Fucosylated 2 and 3 antennae complex (FA2 and FA3) glycans and oligomannose (OM) glycans are depicted in dark red, orange, and green. Binding site region, which includes RBM (residues 438 to 506) and C105 antibody binding residues (i.e., 403, 405, 406, 408, 409, 415 to 417, 420, 421, 449, 453, 455 to 460, 473 to 477, 486, 487, 489, 493 to 496, 498, and 500 to 505), is colored yellow. These binding site residues are more exposed in the one-up conformation, compared to the all-down case. (E) Representative configuration describing S309 Fab binding to an up-RBD in G-form that shows no rotation toward NTD of the neighboring protomer on the right (~0° rolling angle) (top view of the Spike is shown). This structure shows that the Fab domain does not sterically clash with the Spike protein. (F) Representative configuration showing S309 Fab binding to an up-RBD in D-form where the RBD is rotated toward the NTD of the neighboring protomer on the right [rolling angle is <−10°; same view as in (E) is shown]. The Fab domain starts to sterically clash with the Spike protein NTD of the neighboring protomer. See Supplementary Materials and Methods and fig. S7 for details on RBD rotations.
Fig. 7 RBD is more exposed in the one-up conformation. (A) Surface representation of the all-down Spike complex. Colors ranging between red, white, and blue represent values for the GEF. GEF describes relative exposure and coverage of protein surfaces. (B) Surface representation of the one-up Spike. Colors ranging between cyan, white, and magenta indicate GEF differences between the closed and open structures. The RBD in the up orientation is indicated by the dotted circle, where the originally buried (magenta) region around 458 to 478 is now exposed. (C and D) Top view of the Spike protein apex in (C) all-down and (D) one-up conformations. Protein surface is shown in gray. Glycan ensembles covering the protein surface are represented by point densities. Fucosylated 2 and 3 antennae complex (FA2 and FA3) glycans and oligomannose (OM) glycans are depicted in dark red, orange, and green. Binding site region, which includes RBM (residues 438 to 506) and C105 antibody binding residues (i.e., 403, 405, 406, 408, 409, 415 to 417, 420, 421, 449, 453, 455 to 460, 473 to 477, 486, 487, 489, 493 to 496, 498, and 500 to 505), is colored yellow. These binding site residues are more exposed in the one-up conformation, compared to the all-down case. (E) Representative configuration describing S309 Fab binding to an up-RBD in G-form that shows no rotation toward NTD of the neighboring protomer on the right (~0° rolling angle) (top view of the Spike is shown). This structure shows that the Fab domain does not sterically clash with the Spike protein. (F) Representative configuration showing S309 Fab binding to an up-RBD in D-form where the RBD is rotated toward the NTD of the neighboring protomer on the right [rolling angle is <−10°; same view as in (E) is shown]. The Fab domain starts to sterically clash with the Spike protein NTD of the neighboring protomer. See Supplementary Materials and Methods and fig. S7 for details on RBD rotations.CC BY-NC · PubMed Central
Fig. 8 Potential immunological effects of SARS-CoV-2 Spike protein glycosylation. (A) Residue-wise GEF of the RBD domain in D-form, down conformation. Buried residues are colored blue. Exposure increases as the color changes toward white and red. (B and C) Glycan ensembles over Spike ectodomain, D-form. Spike protein surface given in gray. The surface glycans are highly dynamic. Glycans overlaid from 250 different conformations are shown as points; this gives a “cloud”-like rendition of the area most heavily occupied where the points are dense, and space that glycans sample less frequently. Fucosylated 2 and 3 antennae complex (FA2 and FA3) glycans, oligomannose (OM) glycans, and hybrid (Hyb) glycans are colored according to key. (B) All-down and (C) one-up conformations shown. Glycans directly affecting RBD and NTD coverage change due to RBD opening are marked. Removal of glycan 165 has experimentally been shown to increase the population of protomers in the single-protomer up state. Removal of glycan 234 has experimentally been shown to decrease the population of protomers in the single-protomer up state (4). FP residue range 816 to 855 shown in yellow. (D) Effect of D614G substitution on FP coverage. N-glycans surrounding FP are numbered. Glycans at 282, 603, and 801 from the same protomer and glycan 616 from the neighboring protomer contribute to partial shielding of FP. On the left is the point cloud of glycans from 250 different conformations for the four different systems. The white dashed circle shows the areas of change between D-form and G-form. Numbers label all glycans that touch the FP domain. On the right is the change in GEF superimposed on the relevant sequence.
Fig. 8 Potential immunological effects of SARS-CoV-2 Spike protein glycosylation. (A) Residue-wise GEF of the RBD domain in D-form, down conformation. Buried residues are colored blue. Exposure increases as the color changes toward white and red. (B and C) Glycan ensembles over Spike ectodomain, D-form. Spike protein surface given in gray. The surface glycans are highly dynamic. Glycans overlaid from 250 different conformations are shown as points; this gives a “cloud”-like rendition of the area most heavily occupied where the points are dense, and space that glycans sample less frequently. Fucosylated 2 and 3 antennae complex (FA2 and FA3) glycans, oligomannose (OM) glycans, and hybrid (Hyb) glycans are colored according to key. (B) All-down and (C) one-up conformations shown. Glycans directly affecting RBD and NTD coverage change due to RBD opening are marked. Removal of glycan 165 has experimentally been shown to increase the population of protomers in the single-protomer up state. Removal of glycan 234 has experimentally been shown to decrease the population of protomers in the single-protomer up state (4). FP residue range 816 to 855 shown in yellow. (D) Effect of D614G substitution on FP coverage. N-glycans surrounding FP are numbered. Glycans at 282, 603, and 801 from the same protomer and glycan 616 from the neighboring protomer contribute to partial shielding of FP. On the left is the point cloud of glycans from 250 different conformations for the four different systems. The white dashed circle shows the areas of change between D-form and G-form. Numbers label all glycans that touch the FP domain. On the right is the change in GEF superimposed on the relevant sequence.CC BY-NC · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 62 references

Research works printed but not linked: 1

  1. 10.1021/bi962514 · doi:10.1021/bi962514

Cited by

Metadata

Authors
Mansbach, R. A., Chakraborty, S., Nguyen, K., Montefiori, D. C., Korber, B., & Gnanakaran, S.
Affiliations
  • Los Alamos National Laboratory (US)
  • Duke University (US)
Corresponding author
Gnanakaran, S.
Venue
Science Advances
Published
2021-04-16
Volume
7
Issue
16
ISSN
2375-2548 (ISSN-L)
OpenAlex
W3153528761
Cited by
206
References
59
Citations by year
2026: 5 · 2025: 12 · 2024: 13 · 2023: 26 · 2022: 64 · 2021: 68
FWCI
13.54
Type
journal article
Language
en
Open access
Locations
  • Science Advances (publishedVersion, cc-by)
  • bioRxiv (Cold Spring Harbor Laboratory) (acceptedVersion)
  • PubMed Central (publishedVersion, cc-by-nc)
  • PubMed (publishedVersion)
  • PubMed Central (submittedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • U.S. Department of Energy (89233218CNA000001)
  • NIH Office of the Director (P50GM085273)
  • Los Alamos National Laboratory (Director’s Postdoctoral Fellowship, Center of Nonlinear Studies Postdoctoral Program, 20200706ER)
Topics
  • Health Sciences › Medicine › Infectious Diseases › SARS-CoV-2 and COVID-19 Research
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › Protein Structure and Dynamics
  • Life Sciences › Biochemistry, Genetics and Molecular Biology › Molecular Biology › vaccines and immunoinformatics approaches
Keywords
SARS-CoV-2, spike protein, D614G mutation, protein conformational dynamics, receptor binding domain, ACE2 binding, viral infectivity, neutralizing antibodies, vaccine design, COVID-19 pandemic

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.