The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
CO 2 capture from humid flue gases and humid atmosphere using a microporous coppersilicate
Abstract
Grabbing CO 2 from wet gas streams: It is a challenge to extract CO 2 from typical gas streams, such as the flue gas from a power plant. This is because any water in the stream tends to prevent CO 2 absorption and may also degrade the absorbing material. Datta et al. developed a microporous copper silicate that avoids these problems. Most other materials have sites that absorb both water and CO 2 at the same sites, and in that fight, the water tends to win. Although their material still absorbs water, it has separate sites for the CO 2 absorption. It also shows good stability despite the absorbed water and can be reused. Science , this issue p. 302
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
A Chemically Functionalizable Nanoporous Material [Cu 3 (TMA) 2 (H 2 O) 3 ] n
Chui, S. S.-Y., Lo, S. M.-F., Charmant, J. P. H., Orpen, A. G., & Williams, I. D. (1999) · Science · doi:10.1126/science.283.5405.1148 · Cited by 6,063
A Chromium Terephthalate-Based Solid with Unusually Large Pore Volumes and Surface Area
Férey, G., Mellot-Draznieks, C., Serre, C., Millange, F., Dutour, J., Surblé, S., & Margiolaki, I. (2005) · Science · doi:10.1126/science.1116275 · Cited by 5,430
High-Throughput Synthesis of Zeolitic Imidazolate Frameworks and Application to CO 2 Capture
Banerjee, R., Phan, A., Wang, B., Knobler, C., Furukawa, H., O'Keeffe, M., & Yaghi, O. M. (2008) · Science · doi:10.1126/science.1152516 · Cited by 4,205
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation
Nugent, P., Belmabkhout, Y., Burd, S. D., Cairns, A. J., Luebke, R., Forrest, K., Pham, T., Ma, S., Space, B., Wojtas, L., et al. (2013) · Nature · doi:10.1038/nature11893 · Cited by 2,387
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Farha, O. K., Özgür Yazaydın, A., Eryazici, I., Malliakas, C. D., Hauser, B. G., Kanatzidis, M. G., Nguyen, S. T., Snurr, R. Q., & Hupp, J. T. (2010) · Nature Chemistry · doi:10.1038/nchem.834 · Cited by 1,741
Colossal cages in zeolitic imidazolate frameworks as selective carbon dioxide reservoirs
Wang, B., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2008) · Nature · doi:10.1038/nature06900 · Cited by 1,581
Cooperative insertion of CO2 in diamine-appended metal-organic frameworks
McDonald, T. M., Mason, J. A., Kong, X., Bloch, E. D., Gygi, D., Dani, A., Crocellà, V., Giordanino, F., Odoh, S. O., Drisdell, W. S., et al. (2015) · Nature · doi:10.1038/nature14327 · Cited by 1,342
Interwoven Metal-Organic Framework on a Periodic Minimal Surface with Extra-Large Pores
Chen, B., Eddaoudi, M., Hyde, S. T., O'Keeffe, M., & Yaghi, O. M. (2001) · Science · doi:10.1126/science.1056598 · Cited by 1,265
Britt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Development and Evaluation of Porous Materials for Carbon Dioxide Separation and Capture
Bae, Y., & Snurr, R. Q. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201101891 · Cited by 1,208
High H 2 Adsorption in a Microporous Metal–Organic Framework with Open Metal Sites
Chen, B., Ockwig, N. W., Millward, A. R., Contreras, D. S., & Yaghi, O. M. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200462787 · Cited by 1,060
Zeolite A imidazolate frameworks
Hayashi, H., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2007) · Nature Materials · doi:10.1038/nmat1927 · Cited by 1,011
A Breathing Hybrid Organic–Inorganic Solid with Very Large Pores and High Magnetic Characteristics
Barthelet, K., Marrot, J., Riou, D., & Férey, G. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020118)41:2<281::aid-anie281>3.0.co;2-y · Cited by 977
Vaidhyanathan, R., Iremonger, S. S., Shimizu, G. K. H., Boyd, P. G., Alavi, S., & Woo, T. K. (2010) · Science · doi:10.1126/science.1194237 · Cited by 927
Microporous metal-organic framework with potential for carbon dioxide capture at ambient conditions
Xiang, S., He, Y., Zhang, Z., Wu, H., Zhou, W., Krishna, R., & Chen, B. (2012) · Nature Communications · doi:10.1038/ncomms1956 · Cited by 875
Perspective of microporous metal–organic frameworks for CO2capture and separation
Zhang, Z., Yao, Z.-Z., Xiang, S., & Chen, B. (2014) · Energy & Environmental Science · doi:10.1039/c4ee00143e · Cited by 767
Hicks, J. C., Drese, J. H., Fauth, D. J., Gray, M. L., Qi, G., & Jones, C. W. (2008) · Journal of the American Chemical Society · doi:10.1021/ja077795v · Cited by 758
Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture
Shekhah, O., Belmabkhout, Y., Chen, Z., Guillerm, V., Cairns, A., Adil, K., & Eddaoudi, M. (2014) · Nature Communications · doi:10.1038/ncomms5228 · Cited by 713
Dietzel, P. D. C., Panella, B., Hirscher, M., Blom, R., & Fjellvåg, H. (2006) · Chemical Communications · doi:10.1039/b515434k · Cited by 659
Porous materials with pre-designed single-molecule traps for CO2 selective adsorption
Li, J.-R., Yu, J., Lu, W., Sun, L.-B., Sculley, J., Balbuena, P. B., & Zhou, H.-C. (2013) · Nature Communications · doi:10.1038/ncomms2552 · Cited by 631
Dietzel, P. D. C., Morita, Y., Blom, R., & Fjellvåg, H. (2005) · Angewandte Chemie International Edition · doi:10.1002/anie.200501508 · Cited by 591
Structure of the microporous titanosilicate ETS-10
Anderson, M. W., Terasaki, O., Ohsuna, T., Philippou, A., MacKay, S. P., Ferreira, A., Rocha, J., & Lidin, S. (1994) · Nature · doi:10.1038/367347a0 · Cited by 580
Self-citationYang, S., Lin, X., Lewis, W., Suyetin, M., Bichoutskaia, E., Parker, J. E., Tang, C. C., Allan, D. R., Rizkallah, P. J., Hubberstey, P., et al. (2012) · Nature Materials · doi:10.1038/nmat3343 · Cited by 477
Kizzie, A. C., Wong-Foy, A. G., & Matzger, A. J. (2011) · Langmuir · doi:10.1021/la200547k · Cited by 473
Evaluation of cation-exchanged zeolite adsorbents for post-combustion carbon dioxide capture
Bae, T.-H., Hudson, M. R., Mason, J. A., Queen, W. L., Dutton, J. J., Sumida, K., Micklash, K. J., Kaye, S. S., Brown, C. M., & Long, J. R. (2013) · Energy Environ. Sci. · doi:10.1039/c2ee23337a · Cited by 437
Discriminative Separation of Gases by a “Molecular Trapdoor” Mechanism in Chabazite Zeolites
Shang, J., Li, G., Singh, R., Gu, Q., Nairn, K. M., Bastow, T. J., Medhekar, N., Doherty, C. M., Hill, A. J., Liu, J. Z., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja309274y · Cited by 436
Mason, J. A., McDonald, T. M., Bae, T.-H., Bachman, J. E., Sumida, K., Dutton, J. J., Kaye, S. S., & Long, J. R. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b00838 · Cited by 384
A Water Stable Metal–Organic Framework with Optimal Features for CO2 Capture
Yang, Q., Vaesen, S., Ragon, F., Wiersum, A. D., Wu, D., Lago, A., Devic, T., Martineau, C., Taulelle, F., Llewellyn, P. L., et al. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201302682 · Cited by 341
Nguyen, N. T. T., Furukawa, H., Gándara, F., Nguyen, H. T., Cordova, K. E., & Yaghi, O. M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201403980 · Cited by 280
Lozinska, M. M., Mangano, E., Mowat, J. P. S., Shepherd, A. M., Howe, R. F., Thompson, S. P., Parker, J. E., Brandani, S., & Wright, P. A. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3070864 · Cited by 211
CO2 capture from gas stream by zeolite 13X using a dual-column temperature/vacuum swing adsorption
Su, F., & Lu, C. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22647b · Cited by 191
Selective CO2 Capture from Flue Gas Using Metal–Organic Frameworks―A Fixed Bed Study
Liu, J., Tian, J., Thallapally, P. K., & McGrail, B. P. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp300961j · Cited by 189
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
Onsite CO 2 Capture from Flue Gas by an Adsorption Process in a Coal-Fired Power Plant
Liu, Z., Wang, L., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3005308 · Cited by 126
Wang, X., & Jacobson, A. J. (1999) · Chemical Communications · doi:10.1039/a901280j · Cited by 108
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.07.028 · Cited by 96
Adsorption of carbon dioxide, ethane, and methane on titanosilicate type molecular sieves
Ansón‐Casaos, A., Lin, C., Kuznicki, S. M., & Sawada, J. A. (2009) · Chemical Engineering Science · doi:10.1016/j.ces.2009.05.024 · Cited by 76
Enhancing Amine‐Supported Materials for Ambient Air Capture
Sculley, J. P., & Zhou, H.-C. “. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201207495 · Cited by 57
Cited by
Pore chemistry and size control in hybrid porous materials for acetylene capture from ethylene
Cui, X., Chen, K., Xing, H., Yang, Q., Krishna, R., Bao, Z., Wu, H., Zhou, W., Dong, X., Han, Y., et al. (2016) · Science · doi:10.1126/science.aaf2458 · Cited by 1,449
Metal–Organic Frameworks for Separation
Zhao, X., Wang, Y., Li, D., Bu, X., & Feng, P. (2018) · Advanced Materials · doi:10.1002/adma.201705189 · Cited by 1,305
Covalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Bhatt, P. M., Belmabkhout, Y., Cadiau, A., Adil, K., Shekhah, O., Shkurenko, A., Barbour, L. J., & Eddaoudi, M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b05345 · Cited by 553
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Metadata
- Authors
- Datta, S. J., Khumnoon, C., Lee, Z. H., Moon, W. K., Docao, S., Nguyen, T. H., Hwang, I. C., Moon, D., Oleynikov, P., Terasaki, O., & Yoon, K. B.
- Venue
- Science
- Published
- 2015-10-16
- Volume
- 350
- Issue
- 6258
- Pages
- 302-306
- ISSN
- 0036-8075 (ISSN-L)
- 1095-9203
- OpenAlex
- W2246524704
- Cited by
- 282
- References
- 45
- FWCI
- 22.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.