CoChat

Chemically recyclable polyolefin-like multiblock polymers

Open access

The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index; 10 of the 34 sources its claims cite were checked for support.

Abstract

Polyolefins are the most important and largest volume plastics produced. Unfortunately, the enormous use of plastics and lack of effective disposal or recycling options have created a plastic waste catastrophe. In this work, we report an approach to create chemically recyclable polyolefin-like materials with diverse mechanical properties through the construction of multiblock polymers from hard and soft oligomeric building blocks synthesized with ruthenium-mediated ring-opening metathesis polymerization of cyclooctenes. The multiblock polymers exhibit broad mechanical properties, spanning elastomers to plastomers to thermoplastics, while integrating a high melting transition temperature ( T m ) and low glass transition temperature ( T g ), making them suitable for use across diverse applications ( T m as high as 128°C and T g as low as –60°C). After use, the different plastics can be combined and efficiently deconstructed back to the fundamental hard and soft building blocks for separation and repolymerization to realize a closed-loop recycling process.

Overview

CoChat Summary

TL;DR

The paper reports chemically recyclable polyolefin-like multiblock polymers built from hard and soft oligomeric diol building blocks via ruthenium-mediated ring-opening metathesis polymerization and dehydrogenation polymerization. The materials span elastomer-to-thermoplastic properties and can be mixed, depolymerized back to the building blocks, separated, and repolymerized in a closed-loop process.

Key findings

  • Multiblock polymers were synthesized from hard HO-HB-OH (M_w = 3.3 kDa) and soft HO-SB-OH (M_w = 3.0 kDa) blocks with hard content varied from 0 to 100%; polymer M_w ranged from 62.7 to 90.4 kDa with Đ > 2.2, and T_d5 was 406–421 °C, comparable to HDPE (430 °C) and LLDPE (434 °C).
  • Mechanical properties spanned elastomers to thermoplastics: Young’s modulus increased from 0.58 MPa (PE0) to 800 MPa (PE100), tensile strength from 0.041 MPa to 25 MPa, elongation at break averaged >700% and exceeded 1000% for PE20 and PE40, and toughness ranged from 0.19 to 150 MJ·m⁻³.
  • Multiblock polymers containing hard blocks showed T_m = 106–124 °C, while polymers with <80% hard content had T_g = −46.5 to −60.0 °C; the abstract reports T_m as high as 128 °C and T_g as low as −60 °C.
  • Mixed PE0–PE100 samples after tensile testing were combined and depolymerized with >99% conversion; hard and soft oligomers were separated and purified in 91.7% isolated yield, and repolymerized PE80 retained M_w = 73.8–96.6 kDa over three cycles with tensile properties comparable to virgin PE80. PE60 was also depolymerized in the presence of polypropylene, with oligomers separated in high yield.

Methods

  • Hard and soft telechelic diol oligomers were made by ruthenium-mediated ring-opening metathesis polymerization of cyclooctene or 3-hexylcyclooctene using cis-hexadec-6-ene-1,16-diol as a chain-transfer agent, followed by hydrogenation (40 bar H₂, 100 °C).
  • Multiblock polymers were produced by ruthenium-catalyzed dehydrogenation polymerization of hard and soft oligomer mixtures at 150 °C for 48 h, with hard block feed ratios from 0 to 100%.
  • Characterization included HT-SEC, ¹H/¹³C NMR, DSC, TGA, WAXS, polarized light optical microscopy, rheology creep tests, DMTA, uniaxial tensile testing (ASTM D638 Type V), and ICP-MS for residual Ru. Recycling used Ru-catalyzed depolymerization under 40 bar H₂ at 150–160 °C in toluene, followed by selective solvent separation, purification, and repolymerization.

Limitations

  • Stated: the catalyst was difficult to remove and colored the polymers; residual ruthenium contamination could impede biomedical or food-packaging uses, especially where transparency is desired, and precious-metal catalysts are undesirable for commodity plastic production. The authors foresee that nonprecious-metal catalyst systems with enhanced performance will be needed for commercial impact.
  • Stated: molecular weight variations, different hard/soft compositions, and statistical block sequence formations led to imprecise correlations with rheological properties, and further explanation was not possible because PE100 as a linear analogue was non-exact due to M_w discrepancy.
  • Evident from the text: recycling was demonstrated at laboratory scale with model multiblock polymers and a polypropylene microcentrifuge tube, not with real post-consumer mixed plastic waste; no economic or life-cycle assessment is reported, and depolymerization requires elevated temperatures and 40 bar H₂.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1126/science.adh3353

Cites

47 of 47 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

8 Valid · 2 Not valid · 19 Not checked · 73 Own results and interpretations

37 more claims

Create a free account to see all 102 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 30
  • Probably not a substantial claim. 33

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

5 of 9 · the rest aren’t loaded

4 more findings

Create a free account to see every finding of this check.

See all findings — free account

Citations

Cites

Show all 47 references

Research works printed but not linked: 1

  1. J. Brandrup E. H. Immergut E. A. Grulke Polymer handbook . (Wiley ed. 4 2003).

Cited by

Metadata

Authors
Zhao, Y., Rettner, E. M., Harry, K. L., Hu, Z., Miscall, J., Rorrer, N. A., & Miyake, G. M.
Affiliations
  • Colorado State University (US)
  • National Laboratory of the Rockies (US)
Corresponding author
  • Zhao, Yucheng
  • Rettner, Emma M.
  • Miyake, Garret M.
Venue
Science
Published
2023-10-20
Volume
382
Issue
6668
Pages
310-314
ISSN
  • 0036-8075 (ISSN-L)
  • 1095-9203
OpenAlex
W4387770872
Cited by
205
References
47
Citations by year
2026: 66 · 2025: 98 · 2024: 37 · 2023: 4
FWCI
13.08
Type
journal article
Language
en
Open access
Locations
  • Science (publishedVersion)
  • PubMed (publishedVersion)
  • PubMed Central (acceptedVersion)
  • OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
Funders
  • U.S. Department of Energy (DE -AC36-08GO28308, DESC0022290, 08GO28308, AC36‐08GO28308)
  • Colorado State University (SCR_021758)
  • National Institutes of Health
  • Office of Science (DE-AC36-08GO28308, DESC0022290)
  • Office of Energy Efficiency and Renewable Energy (DE-AC36-08-GO28308., AC36-08-GO28308)
  • National Institute of General Medical Sciences (R35GM144356)
  • Bioenergy Technologies Office (DE-AC36-08-GO28308)
  • Office of Energy Efficiency
Topics
  • Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
  • Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
  • Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
Keywords
chemically recyclable polymers, multiblock copolymers, polyolefins, ring-opening metathesis polymerization, ruthenium catalysts, cyclooctene, closed-loop recycling, plastic waste, elastomers, plastomers, thermoplastics, glass transition temperature, mechanical properties

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-12, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-12 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.