The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Human Coronavirus 229E Remains Infectious on Common Touch Surface Materials
Open accessAbstract
The evolution of new and reemerging historic virulent strains of respiratory viruses from animal reservoirs is a significant threat to human health. Inefficient human-to-human transmission of zoonotic strains may initially limit the spread of transmission, but an infection may be contracted by touching contaminated surfaces. Enveloped viruses are often susceptible to environmental stresses, but the human coronaviruses responsible for severe acute respiratory syndrome (SARS) and Middle East respiratory syndrome (MERS) have recently caused increasing concern of contact transmission during outbreaks. We report here that pathogenic human coronavirus 229E remained infectious in a human lung cell culture model following at least 5 days of persistence on a range of common nonbiocidal surface materials, including polytetrafluoroethylene (Teflon; PTFE), polyvinyl chloride (PVC), ceramic tiles, glass, silicone rubber, and stainless steel. We have shown previously that noroviruses are destroyed on copper alloy surfaces. In this new study, human coronavirus 229E was rapidly inactivated on a range of copper alloys (within a few minutes for simulated fingertip contamination) and Cu/Zn brasses were very effective at lower copper concentration. Exposure to copper destroyed the viral genomes and irreversibly affected virus morphology, including disintegration of envelope and dispersal of surface spikes. Cu(I) and Cu(II) moieties were responsible for the inactivation, which was enhanced by reactive oxygen species generation on alloy surfaces, resulting in even faster inactivation than was seen with nonenveloped viruses on copper. Consequently, copper alloy surfaces could be employed in communal areas and at any mass gatherings to help reduce transmission of respiratory viruses from contaminated surfaces and protect the public health. IMPORTANCE Respiratory viruses are responsible for more deaths globally than any other infectious agent. Animal coronaviruses that “host jump” to humans result in severe infections with high mortality, such as severe acute respiratory syndrome (SARS) and, more recently, Middle East respiratory syndrome (MERS). We show here that a closely related human coronavirus, 229E, which causes upper respiratory tract infection in healthy individuals and serious disease in patients with comorbidities, remained infectious on surface materials common to public and domestic areas for several days. The low infectious dose means that this is a significant infection risk to anyone touching a contaminated surface. However, rapid inactivation, irreversible destruction of viral RNA, and massive structural damage were observed in coronavirus exposed to copper and copper alloy surfaces. Incorporation of copper alloy surfaces in conjunction with effective cleaning regimens and good clinical practice could help to control transmission of respiratory coronaviruses, including MERS and SARS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ruuskanen, O., Lahti, E., Jennings, L. C., & Murdoch, D. R. (2011) · The Lancet · doi:10.1016/s0140-6736(10)61459-6 · Cited by 1,124
How far droplets can move in indoor environments ? revisiting the Wells evaporation?falling curve
Xie, X., Li, Y., Chwang, A. T. Y., Ho, P. L., & Seto, W. H. (2007) · Indoor Air · doi:10.1111/j.1600-0668.2007.00469.x · Cited by 966
Chan, J. F. W., Lau, S. K. P., To, K. K. W., Cheng, V. C. C., Woo, P. C. Y., & Yuen, K.-Y. (2015) · Clinical Microbiology Reviews · doi:10.1128/cmr.00102-14 · Cited by 881
Effects of Air Temperature and Relative Humidity on Coronavirus Survival on Surfaces
Casanova, L. M., Jeon, S., Rutala, W. A., Weber, D. J., & Sobsey, M. D. (2010) · Applied and Environmental Microbiology · doi:10.1128/aem.02291-09 · Cited by 735
Otter, J. A., Yezli, S., Salkeld, J. A. G., & French, G. L. (2013) · American Journal of Infection Control · doi:10.1016/j.ajic.2012.12.004 · Cited by 594
Survival of Influenza Viruses on Environmental Surfaces
Bean, B., Moore, B. M., Sterner, B., Peterson, L. R., Gerding, D. N., & Balfour, H. H. (1982) · Journal of Infectious Diseases · doi:10.1093/infdis/146.1.47 · Cited by 539
2014 MERS-CoV Outbreak in Jeddah — A Link to Health Care Facilities
Oboho, I. K., Tomczyk, S. M., Al-Asmari, A. M., Banjar, A. A., Al-Mugti, H., Aloraini, M. S., Alkhaldi, K. Z., Almohammadi, E. L., Alraddadi, B. M., Gerber, S. I., et al. (2015) · New England Journal of Medicine · doi:10.1056/nejmoa1408636 · Cited by 475
Booth, T. F., Kournikakis, B., Bastien, N., Ho, J., Kobasa, D., Stadnyk, L., Li, Y., Spence, M., Paton, S., Henry, B., et al. (2005) · The Journal of Infectious Diseases · doi:10.1086/429634 · Cited by 425
Noyce, J. O., Michels, H., & Keevil, C. W. (2006) · Journal of Hospital Infection · doi:10.1016/j.jhin.2005.12.008 · Cited by 403 · cited 1×
“Copper alloys have demonstrated excellent antibacterial and antifungal activity against a range of pathogens in laboratory studies (14) (15) (16) (17) (18) (19) .”
BackgroundSelf-citationBreban, R., Riou, J., & Fontanet, A. (2013) · The Lancet · doi:10.1016/s0140-6736(13)61492-0 · Cited by 385
Cited by
Persistence of coronaviruses on inanimate surfaces and their inactivation with biocidal agents.
Kampf, G., Todt, D., Pfaender, S., & Steinmann, E. (2020) · Journal of Hospital Infection · doi:10.1016/j.jhin.2020.01.022 · Cited by 3,796
SARS-CoV-2 and Coronavirus Disease 2019: What We Know So Far
Rabi, F. A., Al Zoubi, M. S., Kasasbeh, G. A., Salameh, D. M., & Al-Nasser, A. D. (2020) · Pathogens · doi:10.3390/pathogens9030231 · Cited by 775
Metallodrugs are unique: opportunities and challenges of discovery and development
Anthony, E. J., Bolitho, E. M., Bridgewater, H. E., Carter, O. W. L., Donnelly, J. M., Imberti, C., Lant, E. C., Lermyte, F., Needham, R. J., Palau, M., et al. (2020) · Chemical Science · doi:10.1039/d0sc04082g · Cited by 692
Toward Nanotechnology-Enabled Approaches against the COVID-19 Pandemic
Weiss, C., Carriere, M., Fusco, L., Capua, I., Regla-Nava, J. A., Pasquali, M., Scott, J. A., Vitale, F., Unal, M. A., Mattevi, C., et al. (2020) · ACS Nano · doi:10.1021/acsnano.0c03697 · Cited by 601
The effect of temperature on persistence of SARS-CoV-2 on common surfaces
Riddell, S., Goldie, S., Hill, A., Eagles, D., & Drew, T. W. (2020) · Virology Journal · doi:10.1186/s12985-020-01418-7 · Cited by 596
Copper as an antimicrobial agent: recent advances
Salah, I., Parkin, I. P., & Allan, E. (2021) · RSC Advances · doi:10.1039/d1ra02149d · Cited by 453
Aboubakr, H. A., Sharafeldin, T. A., & Goyal, S. M. (2021) · Transboundary and Emerging Diseases · doi:10.1111/tbed.13707 · Cited by 443
Imani, S. M., Ladouceur, L., Marshall, T., Maclachlan, R., Soleymani, L., & Didar, T. F. (2020) · ACS Nano · doi:10.1021/acsnano.0c05937 · Cited by 433
Exaggerated risk of transmission of COVID-19 by fomites
Goldman, E. (2020) · The Lancet Infectious Diseases · doi:10.1016/s1473-3099(20)30561-2 · Cited by 371
Liang, Y., Wang, M.-L., Chien, C.-S., Yarmishyn, A. A., Yang, Y.-P., Lai, W.-Y., Luo, Y.-H., Lin, Y.-T., Chen, Y.-J., Chang, P.-C., et al. (2020) · Frontiers in Immunology · doi:10.3389/fimmu.2020.01022 · Cited by 339
Repercussions of COVID-19 pandemic on municipal solid waste management: Challenges and opportunities
Kulkarni, B. N., & Anantharama, V. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.140693 · Cited by 286
MERS-CoV: Understanding the Latest Human Coronavirus Threat
Chafekar, A., & Fielding, B. (2018) · Viruses · doi:10.3390/v10020093 · Cited by 276
Antiviral surfaces and coatings and their mechanisms of action
Rakowska, P. D., Tiddia, M., Faruqui, N., Bankier, C., Pei, Y., Pollard, A. J., Zhang, J., & Gilmore, I. S. (2021) · Communications Materials · doi:10.1038/s43246-021-00153-y · Cited by 265
Excessive use of disinfectants against COVID-19 posing a potential threat to living beings
Ghafoor, D., Khan, Z., Khan, A., Ualiyeva, D., & Zaman, N. (2021) · Current Research in Toxicology · doi:10.1016/j.crtox.2021.02.008 · Cited by 151
Barh, D., Tiwari, S., Weener, M. E., Azevedo, V., Góes-Neto, A., Gromiha, M. M., & Ghosh, P. (2020) · Computers in Biology and Medicine · doi:10.1016/j.compbiomed.2020.104051 · Cited by 90
“Copper irreversibly disintegrates Coronavirus genomes, envelope, and spike [74].”
BackgroundD’Accolti, M., Soffritti, I., Bonfante, F., Ricciardi, W., Mazzacane, S., & Caselli, E. (2021) · Viruses · doi:10.3390/v13112227 · Cited by 29
“Parainfluenza viruses, hepatitis B and C viruses, and HIV-1 were also reported to persist on surfaces and fomites [30], which may represent possible virus reservoirs and transmission vectors to susceptible humans [28,31].”
BackgroundImpact of the COVID-19 crisis on imaging in oncological trials
Deroose, C. M., Lecouvet, F. E., Collette, L., Oprea-Lager, D. E., Kunz, W. G., Bidaut, L., Verhoeff, J. J. C., Caramella, C., Lopci, E., Tombal, B., et al. (2020) · European Journal of Nuclear Medicine and Molecular Imaging · doi:10.1007/s00259-020-04910-y · Cited by 12
Metadata
- Authors
- Warnes, S. L., Little, Z. R., & Keevil, C. W.
- Venue
- mBio
- Publisher
- American Society for Microbiology
- Published
- 2015-12-31
- Volume
- 6
- Issue
- 6
- Pages
- e01697-15
- ISSN
- 2150-7511 (ISSN-L)
- 2161-2129
- OpenAlex
- W2180848504
- Cited by
- 506
- References
- 49
- FWCI
- 2.14
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.