Hydrothermal liquefaction of microalgae to produce biofuels: state of the art and future prospects
The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Abstract
The article presents a review of the state of the art and lines of research on hydrothermal liquefaction (HTL) of microalgae (MA). The main advantages of this technology for production of biofuel are that it does not require predrying of the feedstock and ensures a relatively high product yield—the ratio of the end product weight to the feedstock weight—owing to the fact that all the microalgal components, viz., lipids, proteins, and carbohydrates, are converted into biofuel. MA hydrothermal liquefaction is considered to be a promising technology for conversion of biomass and is a subject of a series of research studies and, judging by the available publications, the scope of research in this field is expanding currently. However, many significant problems remain unsolved. In particular, an active searched is being conducted for suitable strains that will ensure not only a high lipid yield—necessary to convert microalgae into biodiesel—but also higher biomass productivity and a higher biofuel yield; the chemical reactions that occur during the hydrothermal treatment are being studied; and the effect of significant process variables, such as temperature, heating rate, holdup time at the maximum temperature, biomass concentration in the water suspension, biochemical and elemental compositions of the microalgae, use of catalysts, etc., on the liquefaction processes is being studied. One of the urgent tasks is also the reduction of the nitrogen content in the resulting biofuel. Studies aimed at the development of a continuous process and rational heat-processing plants for thermal microalgal conversion are being conducted to increase the energy efficiency of the HTL process, in particular, to provide the heat recovery and separation of the end product.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rodolfi, L., Chini Zittelli, G., Bassi, N., Padovani, G., Biondi, N., Bonini, G., & Tredici, M. R. (2009) · Biotechnology and Bioengineering · doi:10.1002/bit.22033 · Cited by 2,879
The Potential of Sustainable Algal Biofuel Production Using Wastewater Resources
Pittman, J. K., Dean, A. P., & Osundeko, O. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.035 · Cited by 1,526
Biller, P., & Ross, A. B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.06.028 · Cited by 1,131 · cited 1×
“Bio-oil is studied by the following techniques: the elemental analysis (C, H, N, O, S, Cl) [12, 42, 57, 60]; analysis of the ash and fixed carbon contents and the volatile yield [42, 45], the metal content [31], and the fraction composition [31, 42, 60]; determination of the specific heating power [54, 61]; microscopi…”
MethodHydrothermal liquefaction and gasification of Nannochloropsis sp.
Brown, T. M., Duan, P., & Savage, P. E. (2010) · Energy & Fuels · doi:10.1021/ef100203u · Cited by 745 · cited 4×
“MA in an autoclave showed [39] that the highest biooil yield, 43%, could be obtained at a temperature of 350°C.”
BackgroundInfluentialLópez Barreiro, D., Prins, W., Ronsse, F., & Brilman, W. (2013) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.12.029 · Cited by 695 · cited 3×
“As a rule, an increase in the holdup time has the same qualitative effect as the temperature rise [52].”
BackgroundMethodInfluentialBioethanol production using carbohydrate-rich microalgae biomass as feedstock
Ho, S.-H., Huang, S.-W., Chen, C.-Y., Hasunuma, T., Kondo, A., & Chang, J.-S. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.10.015 · Cited by 683 · cited 1×
“Some MA strains, such as Scenedesmus, Chlorella, and Chlamydomonas, can accumulate a large amount of carbohydrates—more than 50% of the total bulk—that consist predominantly of starch and cellulose [17, 18].”
BackgroundMicroalgae biofuels as an alternative to fossil fuel for power generation
Milano, J., Ong, H. C., Masjuki, H. H., Chong, W. T., Lam, M. K., Loh, P. K., & Vellayan, V. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.12.150 · Cited by 621
Hydrothermal processing of microalgae using alkali and organic acids
Ross, A. B., Biller, P., Kubacki, M. L., Li, H., Lea-Langton, A., & Jones, J. M. (2010) · Fuel · doi:10.1016/j.fuel.2010.01.025 · Cited by 617 · cited 3×
“As shown in [54], the bio-oil yield increased for various catalysts according to the following pattern: Na2CO3 > CH3COOH > KOH > HCOOH.”
BackgroundMethodMicroalgae for the production of bulk chemicals and biofuels
Wijffels, R. H., Barbosa, M. J., & Eppink, M. H. M. (2010) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.215 · Cited by 522
Garcia Alba, L., Torri, C., Samorì, C., van der Spek, J., Fabbri, D., Kersten, S. R. A., & Brilman, D. W. F. (. (2012) · Energy & Fuels · doi:10.1021/ef201415s · Cited by 477
Shuping, Z., Yulong, W., Mingde, Y., Kaleem, I., Chun, L., & Tong, J. (2010) · Energy · doi:10.1016/j.energy.2010.07.013 · Cited by 461 · cited 1×
“Bio-oil is studied by the following techniques: the elemental analysis (C, H, N, O, S, Cl) [12, 42, 57, 60]; analysis of the ash and fixed carbon contents and the volatile yield [42, 45], the metal content [31], and the fraction composition [31, 42, 60]; determination of the specific heating power [54, 61]; microscopi…”
MethodThermochemical Conversion of Microalgal Biomass for Biofuel Production
Raheem, A., Wan Azlina, W. A. K. G., Taufiq Yap, Y. H., Danquah, M. K., & Harun, R. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.186 · Cited by 349 · cited 1×
“Depending on the biomass heating rate, we distinguish between fast and slow pyrolysis [25].”
Catalytic hydrothermal processing of microalgae: decomposition and upgrading of lipids
Biller, P., Riley, R., & Ross, A. B. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.12.113 · Cited by 287 · cited 2×
“The effect of the heterogeneous catalysts Co/Mo/Al2O3, Pt/Al2O3, and Ni/Al2O3 on the yield and properties of bio-oil were studied in [56] using Chlorella vulgaris and Nannochloropsis oculata MA.”
BackgroundMethodLifecycle assessment of microalgae to biofuel: Comparison of thermochemical processing pathways
Bennion, E. P., Ginosar, D. M., Moses, J., Agblevor, F., & Quinn, J. C. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.009 · Cited by 286 · cited 2×
“This is the conclusion reached by the authors of a series of studies in which comparative analysis of pyrolysis and HTL technologies was performed [20, 27, 28].”
BackgroundMethodChiaramonti, D., Prussi, M., Buffi, M., Rizzo, A. M., & Pari, L. (2017) · Applied Energy · doi:10.1016/j.apenergy.2015.12.001 · Cited by 282 · cited 2×
“To convert the entire MA biomass directly into biofuel, mainly pyrolysis and HTL are proposed [20].”
MethodHydrothermal Liquefaction of Low Lipid Content Microalgae into Bio-Crude Oil
Yu, G., Zhang, Y., Schideman, L., Funk, T. L., & Wang, Z. (2011) · Transactions of the ASABE · doi:10.13031/2013.36241 · Cited by 174 · cited 1×
“4%) could be achieved at a temperature of 280°C and a holdup time of 120 min [43].”
BackgroundTwo-stage heterotrophic and phototrophic culture strategy for algal biomass and lipid production
Zheng, Y., Chi, Z., Lucker, B., & Chen, S. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.09.122 · Cited by 148
Elliott, D. C. (2016) · Algal Research · doi:10.1016/j.algal.2015.12.002 · Cited by 102
Preliminary Economic Assessment of Biofuel Production from Microalgae
Abdo, S. M., Abo El-Enin, S. A., El-Khatib, K. M., El-Galad, M. I., Wahba, S. Z., El Diwani, G., & Ali, G. H. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.119 · Cited by 54
Cited by
Microalgal lipids: A review of lipids potential and quantification for 95 phytoplankton species
Morales, M., Aflalo, C., & Bernard, O. (2021) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2021.106108 · Cited by 273
Al-Jabri, H., Das, P., Khan, S., Thaher, M., & AbdulQuadir, M. (2020) · Water · doi:10.3390/w13010027 · Cited by 270
“In the last decade, hydrothermal liquefaction (HTL) emerged as a potential technique to convert whole biomass into bio-oil [217].”
BackgroundCheng, F., Porter, M. D., & Colosi, L. M. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112252 · Cited by 131
Sub- and Supercritical Water Liquefaction of Kraft Lignin and Black Liquor Derived Lignin
Lappalainen, J., Baudouin, D., Hornung, U., Schuler, J., Melin, K., Bjelić, S., Vogel, F., Konttinen, J., & Joronen, T. (2020) · Energies · doi:10.3390/en13133309 · Cited by 87
Chopra, J., Mahesh, D., Yerrayya, A., Vinu, R., Kumar, R., & Sen, R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.147 · Cited by 60
Metadata
- Authors
- Vlaskin, M. S., Chernova, N. I., Kiseleva, S. V., Popel’, O. S., & Zhuk, A. Z.
- Venue
- Thermal Engineering
- Publisher
- Pleiades Publishing Ltd
- Published
- 2017-08-24
- Volume
- 64
- Issue
- 9
- Pages
- 627-636
- ISSN
- 0040-3636 (ISSN-L)
- 0040-6015
- 1555-6301
- OpenAlex
- W2745453149
- Cited by
- 63
- References
- 19
- FWCI
- 2.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.