The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Energy Harvesting Using a Piezoelectric “Cymbal” Transducer in Dynamic Environment
Abstract
In this study, we investigated the capability of harvesting the electrical energy from mechanical vibrations in a dynamic environment through a “cymbal” piezoelectric transducer. Targeted mechanical vibrations lie in the range of 50–150 Hz with force amplitude in the order of 1 kN (automobile engine vibration level). It was found that under such severe stress conditions the metal–ceramic composite transducer “cymbal” is a promising structure. The metal cap enhances the endurance of the ceramic to sustain high loads along with stress amplification. In this preliminary study, the experiments were performed at the frequency of 100 Hz on a cymbal with 29 mm diameter and 1 mm thickness under a force of 7.8 N. At this frequency and force level, 39 mW power was generated from a cymbal measured across a 400 kΩ resistor. A DC–DC converter was designed which allowed the transfer of 30 mW power to a low impedance load of 5 kΩ with a 2% duty cycle and at a switching frequency of 1 kHz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adaptive piezoelectric energy harvesting circuit for wireless remote power supply
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802194 · Cited by 1,206
Self-citationAdaptive piezoelectric energy harvesting circuit for wireless, remote power supply
Ottman, G., Bhatt, A., Hofmann, H., & Lesieutre, G. (2001) · 19th AIAA Applied Aerodynamics Conference · doi:10.2514/6.2001-1505 · Cited by 953
Self-citationOttman, G. K., Hofmann, H. F., & Lesieutre, G. A. (2003) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.809379 · Cited by 672
Self-citationEnergy Storage Characteristics of a Piezo-Generator using Impact Induced Vibration
Umeda, M., Nakamura, K., & Ueha, S. (1997) · Japanese Journal of Applied Physics · doi:10.1143/jjap.36.3146 · Cited by 184
Cited by
A review of power harvesting using piezoelectric materials (2003–2006)
Anton, S. R., & Sodano, H. A. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/3/r01 · Cited by 2,652
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
Mitcheson, P. D., Yeatman, E. M., Rao, G. K., Holmes, A. S., & Green, T. C. (2008) · Proceedings of the IEEE · doi:10.1109/jproc.2008.927494 · Cited by 1,888
High-Performance Piezoelectric Energy Harvesters and Their Applications
Yang, Z., Zhou, S., Zu, J., & Inman, D. (2018) · Joule · doi:10.1016/j.joule.2018.03.011 · Cited by 1,264
Cook-Chennault, K. A., Thambi, N., & Sastry, A. M. (2008) · Smart Materials and Structures · doi:10.1088/0964-1726/17/4/043001 · Cited by 1,241
Advances in energy harvesting using low profile piezoelectric transducers
Priya, S. (2007) · Journal of Electroceramics · doi:10.1007/s10832-007-9043-4 · Cited by 918
Self-citationLiu, H., Zhong, J., Lee, C., Lee, S.-W., & Lin, L. (2018) · Applied Physics Reviews · doi:10.1063/1.5074184 · Cited by 905
Analysis of power output for piezoelectric energy harvesting systems
Shu, Y. C., & Lien, I. C. (2006) · Smart Materials and Structures · doi:10.1088/0964-1726/15/6/001 · Cited by 737
Energy harvesting from low frequency applications using piezoelectric materials
Li, H., Tian, C., & Deng, Z. D. (2014) · Applied Physics Reviews · doi:10.1063/1.4900845 · Cited by 705
Recent Progress on Piezoelectric and Triboelectric Energy Harvesters in Biomedical Systems
Zheng, Q., Shi, B., Li, Z., & Wang, Z. L. (2017) · Advanced Science · doi:10.1002/advs.201700029 · Cited by 566
A review of vibration-based MEMS piezoelectric energy harvesters
Saadon, S., & Sidek, O. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2010.07.024 · Cited by 509
Energy Harvesting for Structural Health Monitoring Sensor Networks
Park, G., Rosing, T., Todd, M. D., Farrar, C. R., & Hodgkiss, W. (2008) · Journal of Infrastructure Systems · doi:10.1061/(asce)1076-0342(2008)14:1(64 · Cited by 434
Piezoelectric energy harvesting: State-of-the-art and challenges
Toprak, A., & Tigli, O. (2014) · Applied Physics Reviews · doi:10.1063/1.4896166 · Cited by 417
Shen, D., Park, J.-H., Ajitsaria, J., Choe, S.-Y., Wikle, H. C., & Kim, D.-J. (2008) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/18/5/055017 · Cited by 407
An overview of lead-free piezoelectric materials and devices
Wei, H., Wang, H., Xia, Y., Cui, D., Shi, Y., Dong, M., Liu, C., Ding, T., Zhang, J., Ma, Y., et al. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc04515a · Cited by 393
Mechanical modulations for enhancing energy harvesting: Principles, methods and applications
Zou, H.-X., Zhao, L.-C., Gao, Q.-H., Zuo, L., Liu, F.-R., Tan, T., Wei, K.-X., & Zhang, W.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113871 · Cited by 377
Zhou, H., Zhang, Y., Qiu, Y., Wu, H., Qin, W., Liao, Y., Yu, Q., & Cheng, H. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112569 · Cited by 370
Ambient wind energy harvesting using cross-flow fluttering
Li, S., Yuan, J., & Lipson, H. (2011) · Journal of Applied Physics · doi:10.1063/1.3525045 · Cited by 325
An improved analysis of the SSHI interface in piezoelectric energy harvesting
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007) · Smart Materials and Structures · doi:10.1088/0964-1726/16/6/028 · Cited by 324
Flexible Piezoelectric Thin‐Film Energy Harvesters and Nanosensors for Biomedical Applications
Hwang, G., Byun, M., Jeong, C. K., & Lee, K. J. (2015) · Advanced Healthcare Materials · doi:10.1002/adhm.201400642 · Cited by 322
Efficiency of energy conversion for a piezoelectric power harvesting system
Shu, Y. C., & Lien, I. C. (2006) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/16/11/026 · Cited by 310
Piezoelectric energy harvesters for biomedical applications
Ali, F., Raza, W., Li, X., Gul, H., & Kim, K.-H. (2019) · Nano Energy · doi:10.1016/j.nanoen.2019.01.012 · Cited by 300
Energy Harvesting Research: The Road from Single Source to Multisource
Bai, Y., Jantunen, H., & Juuti, J. (2018) · Advanced Materials · doi:10.1002/adma.201707271 · Cited by 295
Micromachined PZT cantilever based on SOI structure for low frequency vibration energy harvesting
Shen, D., Park, J.-H., Noh, J. H., Choe, S.-Y., Kim, S.-H., Wikle, H. C., & Kim, D.-J. (2009) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2009.06.007 · Cited by 260
Feasible integration in asphalt of piezoelectric cymbals for vibration energy harvesting
Moure, A., Izquierdo Rodríguez, M. A., Rueda, S. H., Gonzalo, A., Rubio-Marcos, F., Cuadros, D. U., Pérez-Lepe, A., & Fernández, J. F. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.01.030 · Cited by 157
A review of walking energy harvesting using piezoelectric materials
Nia, E. M., Zawawi, N. A. W. A., & Singh, B. S. M. (2017) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/291/1/012026 · Cited by 97
“[35, 36] A cymbal-shaped piezoelectric 53mW [37] Two back-to-back unimorphs 8.”
MethodFloor Tile Energy Harvester for Self-Powered Wireless Occupancy Sensing
Sharpes, N., Vučković, D., & Priya, S. (2016) · Energy Harvesting and Systems · doi:10.1515/ehs-2014-0009 · Cited by 50
Self-citationFabrication and performance of Tile transducers for piezoelectric energy harvesting
Liu, Z., Ding, G., Wang, J., Cai, G., Qin, X., & Shi, K. (2020) · AIP Advances · doi:10.1063/5.0002400 · Cited by 26
Metadata
- Authors
- Kim, H. W., Batra, A., Priya, S., Uchino, K., Markley, D., Newnham, R. E., & Hofmann, H. F.
- Venue
- Japanese Journal of Applied Physics
- Publisher
- IOP Publishing
- Published
- 2004-09-01
- Volume
- 43
- Issue
- 9R
- Pages
- 6178
- ISSN
- 0021-4922 (ISSN-L)
- 1347-4065
- OpenAlex
- W2000207514
- Cited by
- 368
- References
- 4
- FWCI
- 24.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.