TI-TRNG: Technology Independent True Random Number Generator
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
True random number generators (TRNGs) are needed for a variety of security applications and protocols. The quality (randomness) of TRNGs depends on sensitivity to random noise, environmental conditions, and aging. Random sources of noise improve TRNG quality. In older or more mature technologies, the random sources are limited resulting in low TRNG quality. Prior work has also shown that attackers can manipulate voltage supply and temperature to bias the TRNG output. In this paper, we propose bias detection mechanisms and a technology independent TRNG (TI-TRNG) architecture. The TI-TRNG enhances power supply noise for older technologies and uses a self-calibration mechanism that reduces bias in TRNG output due to aging and attacks. Experiment results on 130nm, 90nm, and 45nm FPGAs demonstrate the quality of random sequences from the TI-TRNG across aging and different environmental conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Borkar, S. (2005) · IEEE Micro · doi:10.1109/mm.2005.110 · Cited by 1,320
A Provably Secure True Random Number Generator with Built-In Tolerance to Active Attacks
Sunar, B., Martin, W. J., & Stinson, D. R. (2007) · IEEE Transactions on Computers · doi:10.1109/tc.2007.250627 · Cited by 673
Bucci, M., Germani, L., Luzzi, R., Trifiletti, A., & Varanonuovo, M. (2003) · IEEE Transactions on Computers · doi:10.1109/tc.2003.1190581 · Cited by 403
True Random Number Generator With a Metastability-Based Quality Control
Tokunaga, C., Blaauw, D., & Mudge, T. (2008) · IEEE Journal of Solid-State Circuits · doi:10.1109/jssc.2007.910965 · Cited by 172 · cited 1×
“Random sources of noise improve TRNG quality.”
FPGA-Based True Random Number Generation Using Circuit Metastability with Adaptive Feedback Control
Majzoobi, M., Koushanfar, F., & Devadas, S. (2011) · Lecture Notes in Computer Science · doi:10.1007/978-3-642-23951-9_2 · Cited by 155
2.4GHz 7mW all-digital PVT-variation tolerant True Random Number Generator in 45nm CMOS
Srinivasan, S., Mathew, S., Ramanarayanan, R., Sheikh, F., Anders, M., Kaul, H., Erraguntla, V., Krishnamurthy, R., & Taylor, G. (2010) · 2010 Symposium on VLSI Circuits · doi:10.1109/vlsic.2010.5560296 · Cited by 52
Cited by
True Random Number Generators Using Electrical Noise
Gong, L., Zhang, J., Liu, H., Sang, L., & Wang, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2939027 · Cited by 77
“presented adding self-compensation mechanism or extra power supply noise for oscillator-based TRNG to avoid frequency attacks [62].”
BackgroundRobust hardware true random number generators using DRAM remanence effects
Tehranipoor, F., Yan, W., & Chandy, J. A. (2016) · 2016 IEEE International Symposium on Hardware Oriented Security and Trust (HOST) · doi:10.1109/hst.2016.7495561 · Cited by 54
“Recently, new TRNG models such as Technology Independent (TI) TRNG, TRNG using hot-carrier injection balanced metastable sense amplifiers, Portable TRNG for personal encryption application based on smart phone cameras, and Highly Efficient TRNG in FPGA Devices Using Phase-Locked Loops are investigated in [10], [11], […”
MethodLightweight TRNG Based on Multiphase Timing of Bistables
Wieczorek, P. Z. (2016) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2016.2555248 · Cited by 27
“[10]”
Metadata
- Authors
- Rahman, M. T., Xiao, K., Forte, D., Zhang, X., Shi, J., & Tehranipoor, M.
- Venue
- Proceedings of the 51st Annual Design Automation Conference
- Publisher
- ACM
- Published
- 2014-06
- Pages
- 1-6
- ISSN
- 0738-100X (ISSN-L)
- OpenAlex
- W2154347069
- Cited by
- 65
- References
- 6
- FWCI
- 5.07
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.