The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The “Millipede”—More than thousand tips for future AFM storage
Abstract
We report on a new atomic force microscope (AFM)-based data storage concept called the “Millipede” that has a potentially ultrahigh density, terabit capacity, small form factor, and high data rate. Its potential for ultrahigh storage density has been demonstrated by a new thermomechanical local-probe technique to store and read back data in very thin polymer films. With this new technique, 30–40-nm-sized bit indentations of similar pitch size have been made by a single cantilever/tip in a thin (50-nm) polymethylmethacrylate (PMMA) layer, resulting in a data storage density of 400–500 Gb/in.2High data rates are achieved by parallel operation of large two-dimensional (2D) AFM arrays that have been batch-fabricated by silicon surface-micromachining techniques. The very large scale integration (VLSI) of micro/nanomechanical devices (cantilevers/tips) on a single chip leads to the largest and densest 2D array of 32 × 32 (1024) AFM cantilevers with integrated write/read storage functionality ever built. Time-multiplexed electronics control the write/read storage cycles for parallel operation of the Millipede array chip. Initial areal densities of 100–200 Gb/in.2have been achieved with the 32 × 32 array chip, which has potential for further improvements. In addition to data storage in polymers or other media, and not excluding magnetics, we envision areas in nanoscale science and technology such as lithography, high-speed/large-scale imaging, molecular and atomic manipulation, and many others in which Millipede may open up new perspectives and opportunities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermomechanical writing with an atomic force microscope tip
Mamin, H. J., & Rugar, D. (1992) · Applied Physics Letters · doi:10.1063/1.108460 · Cited by 329
High-density data storage based on the atomic force microscope
Mamin, H. J., Ried, R. P., Terris, B. D., & Rugar, D. (1999) · Proceedings of the IEEE · doi:10.1109/5.763314 · Cited by 81
Micromachined heaters with 1-μs thermal time constants for AFM thermomechanical data storage
Chui, B. W., Mamin, H. J., Terris, B. D., Rugar, D., Goodson, K. E., & Kenny, T. (2002) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/sensor.1997.635387 · Cited by 13
Cited by
Self-Assembled Monolayers of Thiolates on Metals as a Form of Nanotechnology
Love, J. C., Estroff, L. A., Kriebel, J. K., Nuzzo, R. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr0300789 · Cited by 8,282
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Ferroelectric thin films: Review of materials, properties, and applications
Setter, N., Damjanovic, D., Eng, L., Fox, G., Gevorgian, S., Hong, S., Kingon, A., Kohlstedt, H., Park, N. Y., Stephenson, G. B., et al. (2006) · Journal of Applied Physics · doi:10.1063/1.2336999 · Cited by 1,907
Craighead, H. G. (2000) · Science · doi:10.1126/science.290.5496.1532 · Cited by 1,437
Cantilever transducers as a platform for chemical and biological sensors
Lavrik, N. V., Sepaniak, M. J., & Datskos, P. G. (2004) · Review of Scientific Instruments · doi:10.1063/1.1763252 · Cited by 1,117
Emerging memories: resistive switching mechanisms and current status
Jeong, D. S., Thomas, R., Katiyar, R. S., Scott, J. F., Kohlstedt, H., Petraru, A., & Hwang, C. S. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/7/076502 · Cited by 1,106
Ferroelectricity at the Nanoscale: Local Polarization in Oxide Thin Films and Heterostructures
Ahn, C. H., Rabe, K. M., & Triscone, J.-M. (2004) · Science · doi:10.1126/science.1092508 · Cited by 963
The Evolution of Dip‐Pen Nanolithography
Ginger, D. S., Zhang, H., & Mirkin, C. A. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300608 · Cited by 945
Biswas, A., Bayer, I. S., Biris, A. S., Wang, T., Dervishi, E., & Faupel, F. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.11.001 · Cited by 909
Applications of dip-pen nanolithography
Salaita, K., Wang, Y., & Mirkin, C. A. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.39 · Cited by 845
Moriarty, P. (2001) · Reports on Progress in Physics · doi:10.1088/0034-4885/64/3/201 · Cited by 785
The "millipede" - nanotechnology entering data storage
Vettiger, P., Cross, G., Despont, M., Drechsler, U., Durig, U., Gotsmann, B., Haberle, W., Lantz, M. A., Rothuizen, H. E., Stutz, R., et al. (2002) · IEEE Transactions on Nanotechnology · doi:10.1109/tnano.2002.1005425 · Cited by 739
Self-citationNanoscience, Nanotechnology, and Chemistry
Whitesides, G. M. (2005) · Small · doi:10.1002/smll.200400130 · Cited by 719
Patterning: Principles and Some New Developments
Geissler, M., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400835 · Cited by 641
Towards Spin Crossover Applications
Létard, J.-F., Guionneau, P., & Goux-Capes, L. (2006) · Topics in Current Chemistry · doi:10.1007/b95429 · Cited by 635
Ozin, G. A., Manners, I., Fournier‐Bidoz, S., & Arsenault, A. (2005) · Advanced Materials · doi:10.1002/adma.200501767 · Cited by 538
Unimolecular Electrical Rectifiers
Metzger, R. M. (2003) · Chemical Reviews · doi:10.1021/cr020413d · Cited by 518
Fabrication Approaches for Generating Complex Micro- and Nanopatterns on Polymeric Surfaces
del Campo, A., & Arzt, E. (2008) · Chemical Reviews · doi:10.1021/cr050018y · Cited by 484
Scanning Probe Lithography Using Self-Assembled Monolayers
Krämer, S., Fuierer, R. R., & Gorman, C. B. (2003) · Chemical Reviews · doi:10.1021/cr020704m · Cited by 427
Ziegler, C. (2004) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2694-y · Cited by 414
Review on Micro- and Nanolithography Techniques and their Applications
Pimpin, A., & Srituravanich, W. (2012) · Engineering Journal · doi:10.4186/ej.2012.16.1.37 · Cited by 363
UNCONVENTIONAL NANOFABRICATION
Gates, B. D., Xu, Q., Love, J. C., Wolfe, D. B., & Whitesides, G. M. (2004) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.34.052803.091100 · Cited by 324
Development of Carbon Nanotube-Based Sensors—A Review
Mahar, B., Laslau, C., Yip, R., & Sun, Y. (2007) · IEEE Sensors Journal · doi:10.1109/jsen.2006.886863 · Cited by 263
Metal microneedle fabrication using twisted light with spin
Omatsu, T., Chujo, K., Miyamoto, K., Okida, M., Nakamura, K., Aoki, N., & Morita, R. (2010) · Optics Express · doi:10.1364/oe.18.017967 · Cited by 259
Single-Molecule Cut-and-Paste Surface Assembly
Kufer, S. K., Puchner, E. M., Gumpp, H., Liedl, T., & Gaub, H. E. (2008) · Science · doi:10.1126/science.1151424 · Cited by 258
Metadata
- Authors
- Vettiger, P., Despont, M., Drechsler, U., Durig, U., Haberle, W., Lutwyche, M. I., Rothuizen, H. E., Stutz, R., Widmer, R., & Binnig, G. K.
- Venue
- IBM Journal of Research and Development
- Publisher
- IBM
- Published
- 2000-05
- Volume
- 44
- Issue
- 3
- Pages
- 323-340
- ISSN
- 0018-8646 (ISSN-L)
- OpenAlex
- W1986838720
- Cited by
- 566
- References
- 3
- FWCI
- 26.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.