The DOI matches its Crossref record.
NSTF Advances for PEM Electrolysis - the Effect of Alloying on Activity of NSTF Electrolyzer Catalysts and Performance of NSTF Based PEM Electrolyzers
Abstract
Current interest in developing environmentally sound methods of energy generation and storage has led to a renewed interest in hydrogen generation via polymer electrolyte membrane (PEM) electrolysis. PEM electrolysis could provide a clean alternative to existing hydrogen production methods, such as steam reforming, if both the capitalization and operational expenses can be properly managed to improve its economic benefits as well as its environmental benefit.In this paper we explore one method of reducing the capital expenses by both lowering the amount of PGMs used to operate a PEM electrolyzer, and increasing the operating power level per cell. We start off by using 3M’s nano-structured thin film (NSTF) support to reduce the total mass required compared to conventional dispersed catalysts on both the anode and cathode, with exceptional success. Not only is such a NSTF electrolyzer able to operate with only 0.25 mg Ir·cm-2 on the anode, in addition to 0.25 mg Pt·cm-2 on the cathode, the maximum current density we can obtain with this setup approaches 20 A·cm-2. In an attempt to improve the electrode conductivity and lower Ohmic losses over standard iridium oxide, we continued by testing iridium-platinum alloys in both conventional single cell electrolyzer tests and rotating disk electrode tests. Unfortunately, it appears Pt drastically inhibits the OER on the resulting Ir x Pt y-NSTF alloy catalyst.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Buttler, A., & Spliethoff, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.003 · Cited by 2,510
Considerations for the scaling-up of water splitting catalysts
Kibsgaard, J., & Chorkendorff, I. (2019) · Nature Energy · doi:10.1038/s41560-019-0407-1 · Cited by 1,329
Raveendran, A., Chandran, M., & Dhanusuraman, R. (2023) · RSC Advances · doi:10.1039/d2ra07642j · Cited by 892
PEM Fuel cell and electrolysis cell technologies and hydrogen infrastructure development – a review
Wang, Y., Pang, Y., Xu, H., Martinez, A., & Chen, K. S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00790h · Cited by 828
Feng, Q., Yuan, X., Liu, G., Wei, B., Zhang, Z., Li, H., & Wang, H. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.09.006 · Cited by 776
Li, D., Park, E. J., Zhu, W., Shi, Q., Zhou, Y., Tian, H., Lin, Y., Serov, A., Zulevi, B., Baca, E. D., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0577-x · Cited by 763
Advances in alkaline water electrolyzers: A review
David, M., Ocampo-Martínez, C., & Sánchez-Peña, R. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.03.001 · Cited by 750
Enhancing the stability of cobalt spinel oxide towards sustainable oxygen evolution in acid
Li, A., Kong, S., Guo, C., Ooka, H., Adachi, K., Hashizume, D., Jiang, Q., Han, H., Xiao, J., & Nakamura, R. (2022) · Nature Catalysis · doi:10.1038/s41929-021-00732-9 · Cited by 654
Critical Review—Identifying Critical Gaps for Polymer Electrolyte Water Electrolysis Development
Babic, U., Suermann, M., Büchi, F. N., Gubler, L., & Schmidt, T. J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441704jes · Cited by 564
Status and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Metal Boride‐Based Catalysts for Electrochemical Water‐Splitting: A Review
Gupta, S., Patel, M. K., Miotello, A., & Patel, N. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906481 · Cited by 464
Analysis of Voltage Losses in PEM Water Electrolyzers with Low Platinum Group Metal Loadings
Bernt, M., Siebel, A., & Gasteiger, H. A. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0641805jes · Cited by 462
Atomically dispersed hexavalent iridium oxide from MnO 2 reduction for oxygen evolution catalysis
Li, A., Kong, S., Adachi, K., Ooka, H., Fushimi, K., Jiang, Q., Ofuchi, H., Hamamoto, S., Oura, M., Higashi, K., et al. (2024) · Science · doi:10.1126/science.adg5193 · Cited by 456
Chen, N., Paek, S. Y., Lee, J. Y., Park, J. H., Lee, S. Y., & Lee, Y. M. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02642a · Cited by 417
Influence of Ionomer Content in IrO2/TiO2Electrodes on PEM Water Electrolyzer Performance
Bernt, M., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0231611jes · Cited by 416
Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale
Ayers, K., Danilovic, N., Ouimet, R., Carmo, M., Pivovar, B., & Bornstein, M. (2019) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-060718-030241 · Cited by 406
Wang, C. R., Stansberry, J. M., Mukundan, R., Chang, H.-M. J., Kulkarni, D., Park, A. M., Plymill, A. B., Firas, N. M., Liu, C. P., Lang, J. T., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00904 · Cited by 402
PEM water electrolysis for hydrogen production: fundamentals, advances, and prospects
Wang, T., Cao, X., & Jiao, L. (2022) · Carbon Neutrality · doi:10.1007/s43979-022-00022-8 · Cited by 389
A comprehensive review of recent advances in alkaline water electrolysis for hydrogen production
Sebbahi, S., Assila, A., Alaoui Belghiti, A., Laasri, S., Kaya, S., Hlil, E. K., Rachidi, S., & Hajjaji, A. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.07.428 · Cited by 387
Current Challenges in Catalyst Development for PEM Water Electrolyzers
Bernt, M., Hartig‐Weiß, A., Tovini, M. F., El‐Sayed, H. A., Schramm, C., Schröter, J., Gebauer, C., & Gasteiger, H. A. (2020) · Chemie Ingenieur Technik · doi:10.1002/cite.201900101 · Cited by 333
Salehmin, M. N. I., Husaini, T., Goh, J., & Sulong, A. B. (2022) · Energy Conversion and Management · doi:10.1016/j.enconman.2022.115985 · Cited by 329
Liu, Y., Wang, Q., Zhang, J., Ding, J., Cheng, Y., Wang, T., Li, J., Hu, F., Yang, H. B., & Liu, B. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200928 · Cited by 304
Shi, Z., Li, J., Jiang, J., Wang, Y., Wang, X., Li, Y., Yang, L., Chu, Y., Bai, J., Yang, J., et al. (2022) · Angewandte Chemie International Edition · doi:10.1002/anie.202212341 · Cited by 293
Gas Evolution in Water Electrolysis
Kempler, P. A., Coridan, R. H., & Luo, L. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00211 · Cited by 289
Electrolyzer Durability at Low Catalyst Loading and with Dynamic Operation
Alia, S. M., Stariha, S., & Borup, R. L. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0231915jes · Cited by 263
The potential of proton exchange membrane–based electrolysis technology
Ayers, K. (2019) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2019.08.008 · Cited by 162
Electrochemical generation of syngas from water and carbon dioxide at industrially important rates
Liu, Z., Masel, R. I., Chen, Q., Kutz, R., Yang, H., Lewinski, K., Kaplun, M., Luopa, S., & Lutz, D. R. (2016) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2016.04.011 · Cited by 93
Self-citation
Metadata
- Authors
- Lewinski, K. A., van der Vliet, D., & Luopa, S. M.
- Venue
- ECS Transactions
- Publisher
- The Electrochemical Society
- Published
- 2015-09-14
- Volume
- 69
- Issue
- 17
- Pages
- 893-917
- ISSN
- 1938-5862 (ISSN-L)
- 1938-6737
- OpenAlex
- W2284877472
- Cited by
- 150
- References
- 0
- FWCI
- 7.65
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.