The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Studies of Mg-Substituted Li[sub 4−x]Mg[sub x]Ti[sub 5]O[sub 12] Spinel Electrodes (0≤x≤1) for Lithium Batteries
Open accessAbstract
Magnesium-substituted spinel electrodes have been investigated as insertion electrodes for lithium batteries. The substitution of divalent Mg ions for monovalent Li ions in the structure necessitates that the difference in charge must be compensated by a reduction of an equivalent number of Ti cations from to The substitution increases the conductivity of the spinel framework by many orders of magnitude, from for insulating in which all the titanium ions are tetravalent, to for in which the average titanium oxidation state is 3.8. The improved conductivity decreases the area specific impedance of cells and increases the rate capability of electrodes for small x , typically The rechargeable capacity of electrodes, particularly those with x close to 1 (130 mAh/g), is inferior to that of unsubstituted electrodes 150 mAh/g); the smaller capacity is attributed to the partial occupation of tetrahedral (8a) sites by Mg ions in the spinel structure. © 2000 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells
Ohzuku, T., Ueda, A., & Yamamoto, N. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048592 · Cited by 1,940
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Self-citationSpinel Anodes for Lithium‐Ion Batteries
Ferg, E., Gummow, R. J., de Kock, A., & Thackeray, M. M. (1994) · Journal of The Electrochemical Society · doi:10.1149/1.2059324 · Cited by 661
Self-citationStructure and electrochemistry of the spinel oxides LiTi2O4 and Li43Ti53O4
Colbow, K. M., Dahn, J. R., & Haering, R. R. (1989) · Journal of Power Sources · doi:10.1016/0378-7753(89)80152-1 · Cited by 612
Evidence of Two‐Phase Formation upon Lithium Insertion into the Li1.33Ti1.67 O 4 Spinel
Scharner, S., Weppner, W., & Schmid‐Beurmann, P. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1391692 · Cited by 538
Ternary LixTiO2 phases from insertion reactions
Murphy, D. M., Cava, R. J., Zahurak, S. M., & Santoro, A. (1983) · Solid State Ionics · doi:10.1016/0167-2738(83)90268-0 · Cited by 228
Electrochemical lithium insertion into magnesium titanate spinels
Irvine, J. T. S., Thiemann, S., Mather, G. C., et al. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90352-2 · Cited by 2
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Gür, T. M. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01419a · Cited by 2,566
Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium
Ding, J., Hu, W., Paek, E., & Mitlin, D. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00116 · Cited by 970
Enhancing the performances of Li-ion batteries by carbon-coating: present and future
Li, H., & Zhou, H. (2012) · Chem. Commun. · doi:10.1039/c1cc14764a · Cited by 963
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Electrode Degradation in Lithium-Ion Batteries
Pender, J. P., Jha, G., Youn, D. H., Ziegler, J. M., Andoni, I., Choi, E. J., Heller, A., Dunn, B. S., Weiss, P. S., Penner, R. M., et al. (2020) · ACS Nano · doi:10.1021/acsnano.9b04365 · Cited by 873
Ti-based compounds as anode materials for Li-ion batteries
Zhu, G.-N., Wang, Y.-G., & Xia, Y.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03410g · Cited by 862
Porous Li4Ti5O12 Coated with N‐Doped Carbon from Ionic Liquids for Li‐Ion Batteries
Zhao, L., Hu, Y., Li, H., Wang, Z., & Chen, L. (2011) · Advanced Materials · doi:10.1002/adma.201003294 · Cited by 765
Tortuosity Determination of Battery Electrodes and Separators by Impedance Spectroscopy
Landesfeind, J., Hattendorff, J., Ehrl, A., Wall, W. A., & Gasteiger, H. A. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1141607jes · Cited by 731
Second generation ‘nanohybrid supercapacitor’: Evolution of capacitive energy storage devices
Naoi, K., Ishimoto, S., Miyamoto, J.-I., & Naoi, W. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21675b · Cited by 728
Zhao, B., Ran, R., Liu, M., & Shao, Z. (2015) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2015.10.001 · Cited by 644
New Generation “Nanohybrid Supercapacitor”
Naoi, K., Naoi, W., Aoyagi, S., Miyamoto, J.-I., & Kamino, T. (2013) · Accounts of Chemical Research · doi:10.1021/ar200308h · Cited by 587
Li ion battery materials with core–shell nanostructures
Su, L., Jing, Y., & Zhou, Z. (2011) · Nanoscale · doi:10.1039/c1nr10550g · Cited by 526
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
Nanostructured Anode Material for High‐Power Battery System in Electric Vehicles
Amine, K., Belharouak, I., Chen, Z., Tran, T., Yumoto, H., Ota, N., Myung, S., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000441 · Cited by 396
Zhu, G.-N., Liu, H.-J., Zhuang, J.-H., Wang, C.-X., Wang, Y.-G., & Xia, Y.-Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01680f · Cited by 387
M. Gür, T. (2018) · Energy & Environmental Science · doi:10.1039/c8ee90053a · Cited by 374
Recent development and application of Li4Ti5O12 as anode material of lithium ion battery
Yi, T.-F., Jiang, L.-J., Shu, J., Yue, C.-B., Zhu, R.-S., & Qiao, H.-B. (2010) · Journal of Physics and Chemistry of Solids · doi:10.1016/j.jpcs.2010.05.001 · Cited by 371
Xie, J., Gu, P., & Zhang, Q. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00494 · Cited by 352
Status and challenges facing representative anode materials for rechargeable lithium batteries
Zhang, L., Zhu, C., Yu, S., Ge, D., & Zhou, H. (2022) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2021.08.001 · Cited by 314
Ab initio studies of structural and electronic properties of Li4Ti5O12 spinel
Ouyang, C. Y., Zhong, Z. Y., & Lei, M. S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.01.013 · Cited by 282
Kang, E., Jung, Y. S., Kim, G., Chun, J., Wiesner, U., Dillon, A. C., Kim, J. K., & Lee, J. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201101123 · Cited by 276
Advances in spinel Li4Ti5O12anode materials for lithium-ion batteries
Sun, X., Radovanovic, P. V., & Cui, B. (2015) · New Journal of Chemistry · doi:10.1039/c4nj01390e · Cited by 257
Metadata
- Authors
- Chen, C. H., Vaughey, J. T., Jansen, A. N., Dees, D. W., Kahaian, A. J., Goacher, T., & Thackeray, M. M.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2001
- Volume
- 148
- Issue
- 1
- Pages
- A102
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1922504942
- Cited by
- 464
- References
- 7
- FWCI
- 2.51
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.