The DOI matches its Crossref record.
Accelerating Rate Calorimetry Study on the Thermal Stability of Lithium Intercalated Graphite in Electrolyte. I. Experimental
Open accessAbstract
An accelerating rate calorimeter (ARC) was used to measure the thermal stability of a lithiated mesocarbon microbead (MCMB) material in electrolyte under adiabatic conditions. Measurements were carried out to determine the effects of the lithium content and surface area of the electrode as well as the effects of the electrolyte type and the initial heating temperature on thermal stability. MCMB electrodes with both high and low surface area were reacted electrochemically to three compositions: , , and in ethylene carbonate/diethyl carbonate (EC:DEC) (33:67) electrolyte. The low‐surface‐area MCMB samples were also lithiated in EC:DEC (50:50) and EC:DEC (50:50) electrolytes The results showed that self‐heating of the MCMB samples depends on ( i ) the initial lithium content of the material; ( ii ) the electrolyte used; ( iii ) the surface area, and ( iv ) the initial heating temperature of the sample. Measurable self‐heating in the EC:DEC (33:67) samples was detected at 80°C, at 70°C for MCMB in EC:DEC (1:1), and at 50°C for MCMB in EC:DEC (1:1). The initial self‐heating rate for samples containing EC:DEC (33:67) electrolyte could be fit by an Arrhenius relation with an activation energy of 1.4 eV. The initial form of the self‐heating rate profile was a result of the conversion of metastable solid electrolyte interface (SEI) components to stable SEI components. © 1999 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Li, X., Tavajohi, N., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.10.017 · Cited by 2,178
Alloy Negative Electrodes for Li-Ion Batteries
Obrovac, M. N., & Chevrier, V. L. (2014) · Chemical Reviews · doi:10.1021/cr500207g · Cited by 2,175
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
A review of lithium ion battery failure mechanisms and fire prevention strategies
Wang, Q., Mao, B., Stoliarov, S. I., & Sun, J. (2019) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.03.002 · Cited by 1,755
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes
Golubkov, A. W., Fuchs, D., Wagner, J., Wiltsche, H., Stangl, C., Fauler, G., Voitic, G., Thaler, A., & Hacker, V. (2014) · RSC Adv. · doi:10.1039/c3ra45748f · Cited by 901
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
A three-dimensional thermal abuse model for lithium-ion cells
Kim, G.-H., Pesaran, A., & Spotnitz, R. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.04.018 · Cited by 877
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
Surface Characterization of Electrodes from High Power Lithium-Ion Batteries
Andersson, A. M., Abraham, D. P., Haasch, R., MacLaren, S., Liu, J., & Amine, K. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1505636 · Cited by 686
Design of electrolyte solutions for Li and Li-ion batteries: a review
Aurbach, D., Talyosef, Y., Markovsky, B., Markevich, E., Zinigrad, E., Asraf, L., Gnanaraj, J. S., & Kim, H.-J. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.01.090 · Cited by 682
Golubkov, A. W., Scheikl, S., Planteu, R., Voitic, G., Wiltsche, H., Stangl, C., Fauler, G., Thaler, A., & Hacker, V. (2015) · RSC Advances · doi:10.1039/c5ra05897j · Cited by 561
Chemical Composition and Morphology of the Elevated Temperature SEI on Graphite
Andersson, A. M., & Edström, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1397771 · Cited by 556
An electrochemical-thermal coupled overcharge-to-thermal-runaway model for lithium ion battery
Ren, D., Feng, X., Lu, L., Ouyang, M., Zheng, S., Li, J., & He, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.08.035 · Cited by 506
A comparative investigation of aging effects on thermal runaway behavior of lithium-ion batteries
Ren, D., Hsu, H., Li, R., Feng, X., Guo, D., Han, X., Lu, L., He, X., Gao, S., Hou, J., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100034 · Cited by 489
A 3D thermal runaway propagation model for a large format lithium ion battery module
Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2016) · Energy · doi:10.1016/j.energy.2016.08.094 · Cited by 466
Feng, X., He, X., Ouyang, M., Lu, L., Wu, P., Kulp, C., & Prasser, S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.118 · Cited by 458
Decomposition reaction of LiPF6-based electrolytes for lithium ion cells
Kawamura, T., Okada, S., & Yamaki, J.-I. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.084 · Cited by 446
Ren, D., Liu, X., Feng, X., Lu, L., Ouyang, M., Li, J., & He, X. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.06.126 · Cited by 438
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between −40 and 60 °C
Hou, J., Yang, M., Wang, D., & Zhang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904152 · Cited by 419
Du, H., Wang, Y., Kang, Y., Zhao, Y., Tian, Y., Wang, X., Tan, Y., Liang, Z., Wozny, J., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401482 · Cited by 376
A survey of methods for monitoring and detecting thermal runaway of lithium-ion batteries
Liao, Z., Zhang, S., Li, K., Zhang, G., & Habetler, T. G. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.226879 · Cited by 373
Tasaki, K., Goldberg, A., Lian, J.-J., Walker, M., Timmons, A., & Harris, S. J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3239850 · Cited by 370
Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries
Fleischhammer, M., Waldmann, T., Bisle, G., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.135 · Cited by 342
Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells
Kawamura, T., Kimura, A., Egashira, M., Okada, S., & Yamaki, J.-I. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00960-0 · Cited by 332
Waldmann, T., Iturrondobeitia, A., Kasper, M., Ghanbari, N., Aguesse, F., Bekaert, E., Daniel, L., Genies, S., Gordon, I. J., Löble, M. W., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1211609jes · Cited by 328
Guo, G., Long, B., Cheng, B., Zhou, S., Xu, P., & Cao, B. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.10.090 · Cited by 322
Comprehensive gas analysis on large scale automotive lithium-ion cells in thermal runaway
Koch, S., Fill, A., & Birke, K. P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.07.051 · Cited by 315
Arora, S. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.08.020 · Cited by 315
Thermal runaway mechanism of lithium-ion battery with LiNi0.8Mn0.1Co0.1O2 cathode materials
Li, Y., Liu, X., Wang, L., Feng, X., Ren, D., Wu, Y., Xu, G., Lu, L., Hou, J., Zhang, W., et al. (2021) · Nano Energy · doi:10.1016/j.nanoen.2021.105878 · Cited by 315
A Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Overcharge failure investigation of lithium-ion batteries
Yuan, Q., Zhao, F., Wang, W., Zhao, Y., Liang, Z., & Yan, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.147 · Cited by 286
Yang, H., Bang, H., Amine, K., & Prakash, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836126 · Cited by 270
Thermal abuse performance of high-power 18650 Li-ion cells
Roth, E. P., & Doughty, D. H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.068 · Cited by 270
A review of thermal runaway prevention and mitigation strategies for lithium-ion batteries
Shahid, S., & Agelin-Chaab, M. (2022) · Energy Conversion and Management: X · doi:10.1016/j.ecmx.2022.100310 · Cited by 267
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
Thermal Behavior of Lithiated Graphite with Electrolyte in Lithium-Ion Batteries
Wang, Q., Sun, J., Yao, X., & Chen, C. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2139955 · Cited by 259
The significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Nie, M., Demeaux, J., Young, B. T., Heskett, D. R., Chen, Y., Bose, A., Woicik, J. C., & Lucht, B. L. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0021513jes · Cited by 254
Flame-retardant additives for lithium-ion batteries
Hyung, Y. E., Vissers, D. R., & Amine, K. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00225-8 · Cited by 253
Brand, M., Glaser, S., Geder, J., Menacher, S., Obpacher, S., Jossen, A., & Quinger, D. (2013) · 2013 World Electric Vehicle Symposium and Exhibition (EVS27) · doi:10.1109/evs.2013.6914893 · Cited by 59
Schmidt, L., Hankins, K., Bläubaum, L., Gerasimov, M., & Krewer, U. (2025) · Chemical Science · doi:10.1039/d4sc08105f · Cited by 25
Metadata
- Authors
- Richard, M. N., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1999-06-01
- Volume
- 146
- Issue
- 6
- Pages
- 2068-2077
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2079887321
- Cited by
- 601
- References
- 0
- FWCI
- 15.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.