The DOI matches its Crossref record.
Thermal Stability Studies of Li‐Ion Cells and Components
Open accessAbstract
Thermal stability of fully charged 550 mAh prismatic Li‐ion cells (Sn‐doped carbon) and their components are investigated. Accelerating rate calorimetry (ARC) is used to determine the onset temperature of exothermic chemical reactions that force the cell into thermal runaway. Differential scanning calorimetry (DSC) and thermogravimetry analysis are used to determine the thermal stability of the cell's positive electrode (PE) and negative electrode (NE) materials from 35 to 400°C. The cell self‐heating exothermic reactions start at 123°C, and thermal runaway occurs near 167°C. The total exothermic heat generation of the NE and PE materials are 697 and 407 J/g, respectively. Heat generations of the NE and PE materials, washed in diethyl carbonate (DEC) and dried at ≈65°C under vacuum, are significantly lower than unwashed samples. Lithium plating increases the heat generation of the NE material at temperatures near the lithium melting point. Comparison of the heat generation profiles from DSC and ARC tests indicates that thermal runaway of this cell is close to the decomposition temperature range of the unwashed PE material. We conclude that the heat generation from the decomposition of PE material and reaction of that with electrolyte initiates thermal runaway in a Li‐ion cell, under thermally or abusive conditions. © 1999 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Thermal runaway mechanism of lithium ion battery for electric vehicles: A review
Feng, X., Ouyang, M., Liu, X., Lu, L., Xia, Y., & He, X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2017.05.013 · Cited by 4,182
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Review—SEI: Past, Present and Future
Peled, E., & Menkin, S. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1441707jes · Cited by 2,182
A review of lithium-ion battery safety concerns: The issues, strategies, and testing standards
Chen, Y., Kang, Y., Zhao, Y., Wang, L., Liu, J., Li, Y., Liang, Z., He, X., Li, X., Tavajohi, N., et al. (2021) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.10.017 · Cited by 2,178
Chen, R., Li, Q., Yu, X., Chen, L., & Li, H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00268 · Cited by 1,678
Abuse behavior of high-power, lithium-ion cells
Spotnitz, R., & Franklin, J. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00488-3 · Cited by 1,373
A review of power battery thermal energy management
Rao, Z., & Wang, S. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2011.07.096 · Cited by 1,207
Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00241 · Cited by 958
Feng, X., Fang, M., He, X., Ouyang, M., Lu, L., Wang, H., & Zhang, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.005 · Cited by 918
Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes
Golubkov, A. W., Fuchs, D., Wagner, J., Wiltsche, H., Stangl, C., Fauler, G., Voitic, G., Thaler, A., & Hacker, V. (2014) · RSC Adv. · doi:10.1039/c3ra45748f · Cited by 901
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
Building Safe Lithium-Ion Batteries for Electric Vehicles: A Review
Duan, J., Tang, X., Dai, H., Yang, Y., Wu, W., Wei, X., & Huang, Y. (2020) · Electrochemical Energy Reviews · doi:10.1007/s41918-019-00060-4 · Cited by 893
Lithium Batteries and the Solid Electrolyte Interphase (SEI)—Progress and Outlook
Adenusi, H., Chass, G. A., Passerini, S., Tian, K. V., & Chen, G. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202203307 · Cited by 830
Thermal Decomposition of LiPF[sub 6]-Based Electrolytes for Lithium-Ion Batteries
Campion, C. L., Li, W., & Lucht, B. L. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.2083267 · Cited by 827
Safety focused modeling of lithium-ion batteries: A review
Abada, S., Marlair, G., Lecocq, A., Petit, M., Sauvant-Moynot, V., & Huet, F. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.11.100 · Cited by 819
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Ren, D., Feng, X., Liu, L., Hsu, H., Lu, L., Wang, L., He, X., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.020 · Cited by 698
A review of safety strategies of a Li-ion battery
Chombo, P. V., & Laoonual, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228649 · Cited by 596
Golubkov, A. W., Scheikl, S., Planteu, R., Voitic, G., Wiltsche, H., Stangl, C., Fauler, G., Thaler, A., & Hacker, V. (2015) · RSC Advances · doi:10.1039/c5ra05897j · Cited by 561
4.0 V Aqueous Li-Ion Batteries
Yang, C., Chen, J., Qing, T., Fan, X., Sun, W., von Cresce, A., Ding, M. S., Borodin, O., Vatamanu, J., Schroeder, M. A., et al. (2017) · Joule · doi:10.1016/j.joule.2017.08.009 · Cited by 560
The formation and stability of the solid electrolyte interface on the graphite anode
Agubra, V. A., & Fergus, J. W. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.06.024 · Cited by 526
An alternative cooling system to enhance the safety of Li-ion battery packs
Kizilel, R., Sabbah, R., Selman, J. R., & Al-Hallaj, S. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.074 · Cited by 513
Experimental investigation on thermal management of electric vehicle battery with heat pipe
Rao, Z., Wang, S., Wu, M., Lin, Z., & Li, F. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.08.014 · Cited by 486
Decomposition reaction of LiPF6-based electrolytes for lithium ion cells
Kawamura, T., Okada, S., & Yamaki, J.-I. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.05.084 · Cited by 446
Lai, X., Jin, C., Yi, W., Han, X., Feng, X., Zheng, Y., & Ouyang, M. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.026 · Cited by 438
Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between −40 and 60 °C
Hou, J., Yang, M., Wang, D., & Zhang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904152 · Cited by 419
Lithium Ion Battery Anode Aging Mechanisms
Agubra, V., & Fergus, J. (2013) · Materials · doi:10.3390/ma6041310 · Cited by 418
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Zhao, Y., Wang, L., Zhou, Y., Liang, Z., Tavajohi, N., Li, B., & Li, T. (2021) · Advanced Science · doi:10.1002/advs.202003675 · Cited by 387
Experimental Analysis of Thermal Runaway and Propagation in Lithium-Ion Battery Modules
Lopez, C. F., Jeevarajan, J. A., & Mukherjee, P. P. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0921509jes · Cited by 386
Overcharge reaction of lithium-ion batteries
Ohsaki, T., Kishi, T., Kuboki, T., Takami, N., Shimura, N., Sato, Y., Sekino, M., & Satoh, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.105 · Cited by 382
Du, H., Wang, Y., Kang, Y., Zhao, Y., Tian, Y., Wang, X., Tan, Y., Liang, Z., Wozny, J., Li, T., et al. (2024) · Advanced Materials · doi:10.1002/adma.202401482 · Cited by 376
Courtel, F. M., Duncan, H., Abu-Lebdeh, Y., & Davidson, I. J. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04465b · Cited by 362
Interaction of cyclic ageing at high-rate and low temperatures and safety in lithium-ion batteries
Fleischhammer, M., Waldmann, T., Bisle, G., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.08.135 · Cited by 342
Intercalation-Induced Stress and Heat Generation within Single Lithium-Ion Battery Cathode Particles
Zhang, X., Sastry, A. M., & Shyy, W. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2926617 · Cited by 334
Thermal stability of alkyl carbonate mixed-solvent electrolytes for lithium ion cells
Kawamura, T., Kimura, A., Egashira, M., Okada, S., & Yamaki, J.-I. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00960-0 · Cited by 332
Rao, Z., Wang, S., & Zhang, G. (2011) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.07.009 · Cited by 322
A review of blended cathode materials for use in Li-ion batteries
Chikkannanavar, S. B., Bernardi, D. M., & Liu, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.052 · Cited by 316
Internal short circuit in Li-ion cells
Maleki, H., & Howard, J. N. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.02.070 · Cited by 313
Self-citationA Review on the Thermal Hazards of the Lithium-Ion Battery and the Corresponding Countermeasures
Ouyang, D., Chen, M., Huang, Q., Weng, J., Wang, Z., & Wang, J. (2019) · Applied Sciences · doi:10.3390/app9122483 · Cited by 306
Effects of overdischarge on performance and thermal stability of a Li-ion cell
Maleki, H., & Howard, J. N. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.043 · Cited by 302
Self-citationOvercharge failure investigation of lithium-ion batteries
Yuan, Q., Zhao, F., Wang, W., Zhao, Y., Liang, Z., & Yan, D. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.147 · Cited by 286
Yang, H., Bang, H., Amine, K., & Prakash, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836126 · Cited by 270
Thermal abuse performance of high-power 18650 Li-ion cells
Roth, E. P., & Doughty, D. H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.068 · Cited by 270
Diagnostic examination of thermally abused high-power lithium-ion cells
Abraham, D. P., Roth, E. P., Kostecki, R., McCarthy, K., MacLaren, S., & Doughty, D. H. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.04.088 · Cited by 261
Grandjean, T. R. B., Groenewald, J., McGordon, A., Widanage, W. D., & Marco, J. (2018) · Batteries · doi:10.3390/batteries4040049 · Cited by 45
Metadata
- Authors
- Maleki, H., Deng, G., Anani, A., & Howard, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1999-09-01
- Volume
- 146
- Issue
- 9
- Pages
- 3224-3229
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2013664705
- Cited by
- 437
- References
- 0
- FWCI
- 20.65
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.