The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Layered Cathode Materials Li[Ni[sub x]Li[sub (1/3−2x/3)]Mn[sub (2/3−x/3)]]O[sub 2] for Lithium-Ion Batteries
Abstract
The structure, synthesis, and electrochemical behavior of layered Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for x = 1 / 3 , 5/12, and 1/2 are reported for the first time. Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 is derived from Li 2 MnO 3 or Li [ Li 1 / 3 Mn 2 / 3 ] O 2 by substitution of Li + and Mn 4 + by Ni 2 + while maintaining all the remaining Mn atoms in the 4+ oxidation state. Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 with x = 5 / 12 can deliver steady capacities of 150 and 160 mAh/g at 30 and 55°C, respectively, between 3.0 and 4.4 V using a current density of 30 mA/g. Differential scanning calorimetry experiments on charged electrodes of Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for x = 5 / 12 indicate that this material should be safer than LiCoO 2 . Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 with x = 1 / 3 , 5/12, and 1/2 can be cycled between 2.0 and 4.6 V to give capacities of about 200, 180, and 160 mAh/g, respectively, at 30°C. Li [ Ni x Li ( 1 / 3 − 2 x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 with x = 1 / 3 gives a capacity of 220 mAh/g at 55°C between 2.0 and 4.6 V using a current density of 30 mA/g. © 2001 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries
Armstrong, A. R., & Bruce, P. G. (1996) · Nature · doi:10.1038/381499a0 · Cited by 1,438
A new computer program for Rietveld analysis of X-ray powder diffraction patterns
Wiles, D. B., & Young, R. A. (1981) · Journal of Applied Crystallography · doi:10.1107/s0021889881008996 · Cited by 1,429
Novel LiCoO2 Cathode Material with Al2O3 Coating for a Li Ion Cell
Cho, J., Kim, Y. J., & Park, B. (2000) · Chemistry of Materials · doi:10.1021/cm000511k · Cited by 651
Crystallographic and magnetic structure of Li2MnO3
Strobel, P., & Lambert-Andron, B. (1988) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(88)90305-2 · Cited by 341
Sonochemical Synthesis of SnO2 Nanoparticles and Their Preliminary Study as Li Insertion Electrodes
Zhu, J., Lu, Z., Aruna, S. T., Aurbach, D., & Gedanken, A. (2000) · Chemistry of Materials · doi:10.1021/cm990683l · Cited by 341
Self-citation
Cited by
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Lithium Batteries and Cathode Materials
Whittingham, M. S. (2004) · Chemical Reviews · doi:10.1021/cr020731c · Cited by 6,267
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Electrochemical Energy Storage for Green Grid
Yang, Z., Zhang, J., Kintner-Meyer, M. C. W., Lu, X., Choi, D., Lemmon, J. P., & Liu, J. (2011) · Chemical Reviews · doi:10.1021/cr100290v · Cited by 5,250
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Winter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
An, S. J., Li, J., Daniel, C., Mohanty, D., Nagpure, S., & Wood, D. L. (2016) · Carbon · doi:10.1016/j.carbon.2016.04.008 · Cited by 2,121
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Seo, D.-H., Lee, J., Urban, A., Malik, R., Kang, S., & Ceder, G. (2016) · Nature Chemistry · doi:10.1038/nchem.2524 · Cited by 1,561
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Luo, K., Roberts, M. R., Hao, R., Guerrini, N., Pickup, D. M., Liu, Y.-S., Edström, K., Guo, J., Chadwick, A. V., Duda, L. C., et al. (2016) · Nature Chemistry · doi:10.1038/nchem.2471 · Cited by 1,241
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108588y · Cited by 1,188
Performance of layered Li(Ni1/3Co1/3Mn1/3)O2 as cathode for Li-ion batteries
Shaju, K. M., Subba Rao, G. V., & Chowdari, B. V. R. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00593-5 · Cited by 988
High-voltage liquid electrolytes for Li batteries: progress and perspectives
Fan, X., & Wang, C. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00450f · Cited by 980
Lu, Z., Beaulieu, L. Y., Donaberger, R. A., Thomas, C. L., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1471541 · Cited by 906
Self-citationLithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Xu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
Safety issues and mechanisms of lithium-ion battery cell upon mechanical abusive loading: A review
Liu, B., Jia, Y., Yuan, C., Wang, L., Gao, X., Yin, S., & Xu, J. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.036 · Cited by 816
Future generations of cathode materials: an automotive industry perspective
Andre, D., Kim, S.-J., Lamp, P., Lux, S. F., Maglia, F., Paschos, O., & Stiaszny, B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00361j · Cited by 806
Schipper, F., Erickson, E. M., Erk, C., Shin, J.-Y., Chesneau, F. F., & Aurbach, D. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0351701jes · Cited by 762
Qiu, B., Zhang, M., Wu, L., Wang, J., Xia, Y., Qian, D., Liu, H., Hy, S., Chen, Y., An, K., et al. (2016) · Nature Communications · doi:10.1038/ncomms12108 · Cited by 734
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706
Sun, Y., Lee, M., Yoon, C. S., Hassoun, J., Amine, K., & Scrosati, B. (2012) · Advanced Materials · doi:10.1002/adma.201104106 · Cited by 704
Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges
Rozier, P., & Tarascon, J. M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111514jes · Cited by 695
High-Energy Cathode Materials (Li2MnO3–LiMO2) for Lithium-Ion Batteries
Yu, H., & Zhou, H. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400032v · Cited by 624
Layered Li[Ni[sub x]Co[sub 1−2x]Mn[sub x]]O[sub 2] Cathode Materials for Lithium-Ion Batteries
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1413182 · Cited by 586
Self-citationLin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., et al. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00007 · Cited by 582
de Biasi, L., Schwarz, B., Brezesinski, T., Hartmann, P., Janek, J., & Ehrenberg, H. (2019) · Advanced Materials · doi:10.1002/adma.201900985 · Cited by 539
Factors that affect Li mobility in layered lithium transition metal oxides
Kang, K., & Ceder, G. (2006) · Physical Review B · doi:10.1103/physrevb.74.094105 · Cited by 537
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Self-citationBoulineau, A., Simonin, L., Colin, J.-F., Bourbon, C., & Patoux, S. (2013) · Nano Letters · doi:10.1021/nl4019275 · Cited by 467
Yabuuchi, N., Nakayama, M., Takeuchi, M., Komaba, S., Hashimoto, Y., Mukai, T., Shiiba, H., Sato, K., Kobayashi, Y., Nakao, A., et al. (2016) · Nature Communications · doi:10.1038/ncomms13814 · Cited by 459
Yabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301453 · Cited by 432
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Reversible Oxygen Participation to the Redox Processes Revealed for Li1.20Mn0.54Co0.13Ni0.13O2
Koga, H., Croguennec, L., Ménétrier, M., Douhil, K., Belin, S., Bourgeois, L., Suard, E., Weill, F., & Delmas, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.038306jes · Cited by 376
de Biasi, L., Kondrakov, A. O., Geßwein, H., Brezesinski, T., Hartmann, P., & Janek, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b06363 · Cited by 374
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Prospects and Limits of Energy Storage in Batteries
Abraham, K. M. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5026273 · Cited by 348
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Hong, J., Lim, H.-D., Lee, M., Kim, S.-W., Kim, H., Oh, S.-T., Chung, G.-C., & Kang, K. (2012) · Chemistry of Materials · doi:10.1021/cm3005634 · Cited by 304
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Yin, S.-C., Rho, Y.-H., Swainson, I., & Nazar, L. F. (2006) · Chemistry of Materials · doi:10.1021/cm0511769 · Cited by 280
Recent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
Yang, H., Bang, H., Amine, K., & Prakash, J. (2005) · Journal of The Electrochemical Society · doi:10.1149/1.1836126 · Cited by 270
Roles of Surface Chemistry on Safety and Electrochemistry in Lithium Ion Batteries
Lee, K. T., Jeong, S., & Cho, J. (2013) · Accounts of Chemical Research · doi:10.1021/ar200224h · Cited by 267
Zhang, M., Kitchaev, D. A., Lebens-Higgins, Z., Vinckeviciute, J., Zuba, M., Reeves, P. J., Grey, C. P., Whittingham, M. S., Piper, L. F. J., Van der Ven, A., et al. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00416-1 · Cited by 264
A parametric open circuit voltage model for lithium ion batteries
Birkl, C. R., McTurk, E., Roberts, M. R., Bruce, P. G., & Howey, D. A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0331512jes · Cited by 166
Metadata
- Authors
- Lu, Z., MacNeil, D. D., & Dahn, J. R.
- Venue
- Electrochemical and Solid-State Letters
- Publisher
- The Electrochemical Society
- Published
- 2001
- Volume
- 4
- Issue
- 11
- Pages
- A191
- ISSN
- 1099-0062 (ISSN-L)
- OpenAlex
- W2232898241
- Cited by
- 941
- References
- 5
- FWCI
- 36.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.