The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Synthesis, Structure, and Electrochemical Behavior of Li[Ni[sub x]Li[sub 1/3−2x/3]Mn[sub 2/3−x/3]]O[sub 2]
Abstract
The synthesis, structure, and electrochemical performance of Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 for 0 < x ⩽ 1 / 2 is presented. Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 is prepared by substituting Ni 2 + for Li + and Mn 4 + in Li [ Li 1 / 3 Mn 2 / 3 ] O 2 while maintaining all the remaining Mn in the +4 oxidation state. Samples with x = 1 / 6 , 1/4, 1/3, 5/12, and 1/2 have been investigated by X-ray diffraction (XRD) and neutron diffraction as well as by electrochemical measurements. The XRD and neutron diffraction patterns of Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 (0 < x ⩽ 1/2) show that these compounds adopt the O 3 LiCoO 2 -type structure when synthesized at 800°C and higher. XRD and neutron diffraction also suggest a short-range superlattice ordering of Li, Ni, and Mn in the transition-metal layer for many of the samples. When synthesized at 700°C and lower, the compounds (for x = 1/3 and 1/2) appear to adopt a spinel-type structure like LT LiCoO 2 . Electrochemical studies show that Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 (900°C) with x = 5/12 can deliver a stable capacity of about 160 mAh/g between 3.0 and 4.4 V vs . Li. An irreversible plateau is observed at about 4.5 V during the first charge of Li / Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 cells ( x = 1/6, 1/4, 1/3, and 5/12), which we believe corresponds to the simultaneous removal of lithium and oxygen from the structure. After the plateau, Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 cells with x = 1/3 and 5/12 can deliver stable reversible capacities of about 230 and 225 mAh/g between 2.0 and 4.6 V. Li / Li [ Ni x Li 1 / 3 − 2 x / 3 Mn 2 / 3 − x / 3 ] O 2 (0 < x ⩽ 1/2) synthesized at low temperatures ( i.e., 600 and 700°C) shows dramatically different differential capacity vs. voltage behavior compared to the high temperature samples, which must be related to the structural differences between materials prepared above and below 750°C. © 2002 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
A new computer program for Rietveld analysis of X-ray powder diffraction patterns
Wiles, D. B., & Young, R. A. (1981) · Journal of Applied Crystallography · doi:10.1107/s0021889881008996 · Cited by 1,429
X-Ray Diffraction in Random Layer Lattices
Warren, B. E. (1941) · Physical Review · doi:10.1103/physrev.59.693 · Cited by 1,362
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1407994 · Cited by 941
Self-citationRougier, A., Gravereau, P., & Delmas, C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836614 · Cited by 609
Crystallographic and magnetic structure of Li2MnO3
Strobel, P., & Lambert-Andron, B. (1988) · Journal of Solid State Chemistry · doi:10.1016/0022-4596(88)90305-2 · Cited by 341
Sonochemical Synthesis of SnO2 Nanoparticles and Their Preliminary Study as Li Insertion Electrodes
Zhu, J., Lu, Z., Aruna, S. T., Aurbach, D., & Gedanken, A. (2000) · Chemistry of Materials · doi:10.1021/cm990683l · Cited by 341
Self-citationSize and charge effects on the structural stability of LiMO2 (M = transition metal) compounds
Wu, E. J., Tepesch, P. D., & Ceder, G. (1998) · Philosophical Magazine B · doi:10.1080/13642819808206403 · Cited by 103
Cited by
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and Perspectives
Manthiram, A., Knight, J. C., Myung, S., Oh, S., & Sun, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201501010 · Cited by 1,202
Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108588y · Cited by 1,188
Materials Challenges and Opportunities of Lithium Ion Batteries
Manthiram, A. (2011) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1015422 · Cited by 1,065
Formation of the Spinel Phase in the Layered Composite Cathode Used in Li-Ion Batteries
Gu, M., Belharouak, I., Zheng, J., Wu, H., Xiao, J., Genc, A., Amine, K., Thevuthasan, S., Baer, D. R., Zhang, J.-G., et al. (2013) · ACS Nano · doi:10.1021/nn305065u · Cited by 918
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Visualization of O-O peroxo-like dimers in high-capacity layered oxides for Li-ion batteries
McCalla, E., Abakumov, A. M., Saubanère, M., Foix, D., Berg, E. J., Rousse, G., Doublet, M.-L., Gonbeau, D., Novák, P., Van Tendeloo, G., et al. (2015) · Science · doi:10.1126/science.aac8260 · Cited by 854
Superstructure control of first-cycle voltage hysteresis in oxygen-redox cathodes
House, R. A., Maitra, U., Pérez-Osorio, M. A., Lozano, J. G., Jin, L., Somerville, J. W., Duda, L. C., Nag, A., Walters, A., Zhou, K.-J., et al. (2020) · Nature · doi:10.1038/s41586-019-1854-3 · Cited by 848
Recent progress in cathode materials research for advanced lithium ion batteries
Xu, B., Qian, D., Wang, Z., & Meng, Y. S. (2012) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2012.05.003 · Cited by 834
Xu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
Anionic redox processes for electrochemical devices
Grimaud, A., Hong, W. T., Shao-Horn, Y., & Tarascon, J.-M. (2016) · Nature Materials · doi:10.1038/nmat4551 · Cited by 822
The significance of the Li2MnO3 component in ‘composite’ xLi2MnO3·(1−x)LiMn0.5Ni0.5O2 electrodes
Johnson, C. S., Kim, J.-S., Lefief, C., Li, N., Vaughey, J. T., & Thackeray, M. M. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.08.002 · Cited by 740
Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges
Rozier, P., & Tarascon, J. M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111514jes · Cited by 695
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Role of surface coating on cathode materials for lithium-ion batteries
Chen, Z., Qin, Y., Amine, K., & Sun, Y.-K. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00154f · Cited by 672
Yoo, H. D., Markevich, E., Salitra, G., Sharon, D., & Aurbach, D. (2014) · Materials Today · doi:10.1016/j.mattod.2014.02.014 · Cited by 664
Nanostructured electrode materials for electrochemical energy storage and conversion
Manthiram, A., Vadivel Murugan, A., Sarkar, A., & Muraliganth, T. (2008) · Energy & Environmental Science · doi:10.1039/b811802g · Cited by 638
High-Energy Cathode Materials (Li2MnO3–LiMO2) for Lithium-Ion Batteries
Yu, H., & Zhou, H. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz400032v · Cited by 624
Semi‐Solid Lithium Rechargeable Flow Battery
Duduta, M., Ho, B., Wood, V. C., Limthongkul, P., Brunini, V. E., Carter, W. C., & Chiang, Y. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201100152 · Cited by 617
Critical Review on Low‐Temperature Li‐Ion/Metal Batteries
Zhang, N., Deng, T., Zhang, S., Wang, C., Chen, L., Wang, C., & Fan, X. (2022) · Advanced Materials · doi:10.1002/adma.202107899 · Cited by 604
The intriguing question of anionic redox in high-energy density cathodes for Li-ion batteries
Saubanère, M., McCalla, E., Tarascon, J.-M., & Doublet, M.-L. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03048j · Cited by 595
Differential voltage analyses of high-power, lithium-ion cells
Bloom, I., Jansen, A. N., Abraham, D. P., Knuth, J., Jones, S. A., Battaglia, V. S., & Henriksen, G. L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.07.021 · Cited by 585
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
House, R. A., Rees, G. J., Pérez-Osorio, M. A., Marie, J.-J., Boivin, E., Robertson, A. W., Nag, A., Garcia-Fernandez, M., Zhou, K.-J., & Bruce, P. G. (2020) · Nature Energy · doi:10.1038/s41560-020-00697-2 · Cited by 558
Meng, Y. S., & Arroyo-de Dompablo, M. E. (2009) · Energy & Environmental Science · doi:10.1039/b901825e · Cited by 545
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Injection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2Cathode Material for Lithium Ion Batteries
Li, J., Downie, L. E., Ma, L., Qiu, W., & Dahn, J. R. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.1011507jes · Cited by 516
Self-citationLi‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
State-of-the-art characterization techniques for advanced lithium-ion batteries
Lu, J., Wu, T., & Amine, K. (2017) · Nature Energy · doi:10.1038/nenergy.2017.11 · Cited by 492
Boulineau, A., Simonin, L., Colin, J.-F., Bourbon, C., & Patoux, S. (2013) · Nano Letters · doi:10.1021/nl4019275 · Cited by 467
Yabuuchi, N., Hara, R., Kajiyama, M., Kubota, K., Ishigaki, T., Hoshikawa, A., & Komaba, S. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301453 · Cited by 432
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Toward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Yabuuchi, N., Makimura, Y., & Ohzuku, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2455585 · Cited by 387
Reversible Oxygen Participation to the Redox Processes Revealed for Li1.20Mn0.54Co0.13Ni0.13O2
Koga, H., Croguennec, L., Ménétrier, M., Douhil, K., Belin, S., Bourgeois, L., Suard, E., Weill, F., & Delmas, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.038306jes · Cited by 376
Evidence for anionic redox activity in a tridimensional-ordered Li-rich positive electrode β-Li2IrO3
Pearce, P. E., Perez, A. J., Rousse, G., Saubanère, M., Batuk, D., Foix, D., McCalla, E., Abakumov, A. M., Van Tendeloo, G., Doublet, M.-L., et al. (2017) · Nature Materials · doi:10.1038/nmat4864 · Cited by 349
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Yin, S.-C., Rho, Y.-H., Swainson, I., & Nazar, L. F. (2006) · Chemistry of Materials · doi:10.1021/cm0511769 · Cited by 280
Recent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
Cathode materials for next generation lithium ion batteries
Xu, J., Dou, S., Liu, H., & Dai, L. (2013) · Nano Energy · doi:10.1016/j.nanoen.2013.05.013 · Cited by 253
Metadata
- Authors
- Lu, Z., Beaulieu, L. Y., Donaberger, R. A., Thomas, C. L., & Dahn, J. R.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2002
- Volume
- 149
- Issue
- 6
- Pages
- A778
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2161747741
- Cited by
- 906
- References
- 8
- FWCI
- 28.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.