The DOI matches its Crossref record.
Effects of Nanosized Adsorbing Material on Electrochemical Properties of Sulfur Cathodes for Li/S Secondary Batteries
Open accessAbstract
In order to prevent polysulfide dissolution into liquid electrolytes and to promote the Li/S redox reaction nanosized which has the catalytic effect of chemical bond dissociating and is expected to have an adsorbing effect due to the effect of retaining liquid electrolyte of MgO in a Li/iron sulfide secondary battery, 16 was prepared by the sol-gel method as an electrochemically inactive additive for an elemental sulfur cathode for Li/S rechargeable batteries. The Li/S battery using an elemental sulfur cathode with a nanosized added showed the improvement of not only the discharge capacity but also cycle durability (maximum discharge capacity: 1185 mAh/g sulfur, The rate capability of the sulfur cathode was also increased with the addition of the nanosized From the results, it is confirmed that the nanosized had the polysulfide adsorbing effect and the catalytic effect of promoting Li/S redox reaction. Furthermore, it is found that the nanosized also increased the porosity of the sulfur cathode. © 2004 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Li-O2 and Li-S batteries with high energy storage
Bruce, P. G., Freunberger, S. A., Hardwick, L. J., & Tarascon, J.-M. (2012) · Nature Materials · doi:10.1038/nmat3191 · Cited by 9,479
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries
Suo, L., Hu, Y.-S., Li, H., Armand, M., & Chen, L. (2013) · Nature Communications · doi:10.1038/ncomms2513 · Cited by 2,314
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
Porous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201100637 · Cited by 1,811
Promises and challenges of nanomaterials for lithium-based rechargeable batteries
Sun, Y., Liu, N., & Cui, Y. (2016) · Nature Energy · doi:10.1038/nenergy.2016.71 · Cited by 1,703
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
Liu, X., Huang, J., Zhang, Q., & Mai, L. (2017) · Advanced Materials · doi:10.1002/adma.201601759 · Cited by 1,616
Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions
Zhang, S. S. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.102 · Cited by 1,592
The use of elemental sulfur as an alternative feedstock for polymeric materials
Chung, W. J., Griebel, J. J., Kim, E. T., Yoon, H., Simmonds, A. G., Ji, H. J., Dirlam, P. T., Glass, R. S., Wie, J. J., Nguyen, N. A., et al. (2013) · Nature Chemistry · doi:10.1038/nchem.1624 · Cited by 1,455
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries
Zhang, Q., Wang, Y., Seh, Z. W., Fu, Z., Zhang, R., & Cui, Y. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00367 · Cited by 931
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
Current Status and Future Prospects of Metal–Sulfur Batteries
Chung, S., & Manthiram, A. (2019) · Advanced Materials · doi:10.1002/adma.201901125 · Cited by 622
Lim, W., Kim, S., Jo, C., & Lee, J. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201902413 · Cited by 535
Self-citationLithium/sulfur batteries with high specific energy: old challenges and new opportunities
Song, M.-K., Cairns, E. J., & Zhang, Y. (2013) · Nanoscale · doi:10.1039/c2nr33044j · Cited by 522
Self-citationPorous Hollow Carbon@Sulfur Composites for High‐Power Lithium–Sulfur Batteries
Jayaprakash, N., Shen, J., Moganty, S. S., Corona, A., & Archer, L. A. (2011) · Angewandte Chemie · doi:10.1002/ange.201100637 · Cited by 487
Carbon nanomaterials for advanced lithium sulfur batteries
Xu, Z.-L., Kim, J.-K., & Kang, K. (2018) · Nano Today · doi:10.1016/j.nantod.2018.02.006 · Cited by 454
Self-citationPhosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries
Lin, Z., Liu, Z., Fu, W., Dudney, N. J., & Liang, C. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200696 · Cited by 450
Recent advances in lithium–sulfur batteries
Chen, L., & Shaw, L. L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.111 · Cited by 432
MXenes for Rechargeable Batteries Beyond the Lithium‐Ion
Ming, F., Liang, H., Huang, G., Bayhan, Z., & Alshareef, H. N. (2021) · Advanced Materials · doi:10.1002/adma.202004039 · Cited by 424
Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions
Borchardt, L., Oschatz, M., & Kaskel, S. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201600040 · Cited by 414
Yin, L.-C., Liang, J., Zhou, G.-M., Li, F., Saito, R., & Cheng, H.-M. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.04.053 · Cited by 412
Advances in Polar Materials for Lithium–Sulfur Batteries
Wang, H., Zhang, W., Xu, J., & Guo, Z. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707520 · Cited by 412
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Yao, H., Zheng, G., Hsu, P.-C., Kong, D., Cha, J. J., Li, W., Seh, Z. W., McDowell, M. T., Yan, K., Liang, Z., et al. (2014) · Nature Communications · doi:10.1038/ncomms4943 · Cited by 398
A review of recent developments in rechargeable lithium–sulfur batteries
Kang, W., Deng, N., Ju, J., Li, Q., Wu, D., Ma, X., Li, L., Naebe, M., & Cheng, B. (2016) · Nanoscale · doi:10.1039/c6nr04923k · Cited by 391
Zhang, Z., Peng, H., Zhao, M., & Huang, J. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707536 · Cited by 357
A Revolution in Electrodes: Recent Progress in Rechargeable Lithium–Sulfur Batteries
Fang, X., & Peng, H. (2015) · Small · doi:10.1002/smll.201402354 · Cited by 346
Pang, Q., Liang, X., Kwok, C. Y., & Nazar, L. F. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0171514jes · Cited by 323
Development of MoS2–CNT Composite Thin Film from Layered MoS2 for Lithium Batteries
Wang, J., Lu, L., Lotya, M., Coleman, J. N., Chou, S., Liu, H., Minett, A. I., & Chen, J. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201201000 · Cited by 314
High performance lithium–sulfur batteries: advances and challenges
Xu, G., Ding, B., Pan, J., Nie, P., Shen, L., & Zhang, X. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02097a · Cited by 297
Wang, D.-W., Zhou, G., Li, F., Wu, K.-H., Lu, G. Q. (., Cheng, H.-M., & Gentle, I. R. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp40808b · Cited by 296
Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
Wang, J., Chen, J., Konstantinov, K., Zhao, L., Ng, S. H., Wang, G. X., Guo, Z. P., & Liu, H. K. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.12.046 · Cited by 284
12 years roadmap of the sulfur cathode for lithium sulfur batteries (2009–2020)
Liu, T., Hu, H., Ding, X., Yuan, H., Jin, C., Nai, J., Liu, Y., Wang, Y., Wan, Y., & Tao, X. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.05.023 · Cited by 278
Metadata
- Authors
- Song, M.-S., Han, S.-C., Kim, H.-S., Kim, J.-H., Kim, K.-T., Kang, Y.-M., Ahn, H.-J., Dou, S. X., & Lee, J.-Y.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 6
- Pages
- A791
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W1978990849
- Cited by
- 218
- References
- 0
- FWCI
- 1.63
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.