The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.
Discharge Model for the Lithium Iron-Phosphate Electrode
Open accessAbstract
This paper develops a mathematical model for lithium intercalation and phase change in an iron phosphate-based lithium-ion cell in order to understand the cause for the low power capability of the material. The juxtaposition of the two phases is assumed to be in the form of a shrinking core, where a shell of one phase covers a core of the second phase. Diffusion of lithium through the shell and the movement of the phase interface are described and incorporated into a porous electrode model consisting of two different particle sizes. Open-circuit measurements are used to estimate the composition ranges of the single-phase region. Model-experimental comparisons under constant current show that ohmic drops in the matrix phase, contact resistances between the current collector and the porous matrix, and transport limitations in the iron phosphate particle limit the power capability of the cells. Various design options, consisting of decreasing the ohmic drops, using smaller particles, and substituting the liquid electrolyte by a gel are explored, and their relative importance discussed. The model developed in this paper can be used as a means of optimizing the cell design to suit a particular application. © 2004 The Electrochemical Society. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Self-citationElectronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Optimized LiFePO[sub 4] for Lithium Battery Cathodes
Yamada, A., Chung, S. C., & Hinokuma, K. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1348257 · Cited by 1,867
Comparison of Modeling Predictions with Experimental Data from Plastic Lithium Ion Cells
Doyle, M., Newman, J., Gozdz, A. S., Schmutz, C. N., & Tarascon, J. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836921 · Cited by 1,569
Self-citationThermodynamic and Mass Transport Properties of “ LiAl ”
Wen, C. J., Boukamp, B. A., Huggins, R. A., & Weppner, W. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2128939 · Cited by 888
Determination of the chemical diffusion coefficient of lithium in LiFePO4
Prosini, P. (2002) · Solid State Ionics · doi:10.1016/s0167-2738(02)00134-0 · Cited by 844
Chen, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1498255 · Cited by 773
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Effect of Surface Carbon Structure on the Electrochemical Performance of LiFePO[sub 4]
Doeff, M. M., Hu, Y., McLarnon, F., & Kostecki, R. (2003) · Electrochemical and Solid-State Letters · doi:10.1149/1.1601372 · Cited by 491
Cited by
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Automotive Li-Ion Batteries: Current Status and Future Perspectives
Ding, Y., Cano, Z. P., Yu, A., Lu, J., & Chen, Z. (2019) · Electrochemical Energy Reviews · doi:10.1007/s41918-018-0022-z · Cited by 1,370
Development and challenges of LiFePO4cathode material for lithium-ion batteries
Yuan, L.-X., Wang, Z.-H., Zhang, W.-X., Hu, X.-L., Chen, J.-T., Huang, Y.-H., & Goodenough, J. B. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00029a · Cited by 1,301
Masquelier, C., & Croguennec, L. (2013) · Chemical Reviews · doi:10.1021/cr3001862 · Cited by 1,210
Tiwari, J. N., Tiwari, R. N., & Kim, K. S. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.08.003 · Cited by 1,195
Modeling of Lithium-Ion Battery Degradation for Cell Life Assessment
Xu, B., Oudalov, A., Ulbig, A., Andersson, G., & Kirschen, D. S. (2018) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2016.2578950 · Cited by 1,162
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Structure and performance of LiFePO4 cathode materials: A review
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.113 · Cited by 743
Theory of Chemical Kinetics and Charge Transfer based on Nonequilibrium Thermodynamics
Bazant, M. Z. (2013) · Accounts of Chemical Research · doi:10.1021/ar300145c · Cited by 724
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Zheng, H., Li, J., Song, X., Liu, G., & Battaglia, V. S. (2012) · Electrochimica Acta · doi:10.1016/j.electacta.2012.03.161 · Cited by 674
The thermodynamic origin of hysteresis in insertion batteries
Dreyer, W., Jamnik, J., Guhlke, C., Huth, R., Moškon, J., & Gaberšček, M. (2010) · Nature Materials · doi:10.1038/nmat2730 · Cited by 619
Electron Microscopy Study of the LiFePO[sub 4] to FePO[sub 4] Phase Transition
Chen, G., Song, X., & Richardson, T. J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2192695 · Cited by 583
Advances in the Cathode Materials for Lithium Rechargeable Batteries
Lee, W., Muhammad, S., Sergey, C., Lee, H., Yoon, J., Kang, Y., & Yoon, W. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201902359 · Cited by 577
Kinetic analysis on LiFePO4 thin films by CV, GITT, and EIS
Tang, K., Yu, X., Sun, J., Li, H., & Huang, X. (2011) · Electrochimica Acta · doi:10.1016/j.electacta.2011.02.119 · Cited by 574
Quantifying tortuosity in porous Li-ion battery materials
Thorat, I. V., Stephenson, D. E., Zacharias, N. A., Zaghib, K., Harb, J. N., & Wheeler, D. R. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.032 · Cited by 571
Nano active materials for lithium-ion batteries
Wang, Y., Li, H., He, P., Hosono, E., & Zhou, H. (2010) · Nanoscale · doi:10.1039/c0nr00068j · Cited by 550
Recent advances in the research of polyanion-type cathode materials for Li-ion batteries
Gong, Z., & Yang, Y. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00713g · Cited by 549
Study of the LiFePO4/FePO4 Two-Phase System by High-Resolution Electron Energy Loss Spectroscopy
Laffont, L., Delacourt, C., Gibot, P., Wu, M. Y., Kooyman, P., Masquelier, C., & Tarascon, J. M. (2006) · Chemistry of Materials · doi:10.1021/cm0617182 · Cited by 539
Kinetics of non-equilibrium lithium incorporation in LiFePO4
Malik, R., Zhou, F., & Ceder, G. (2011) · Nature Materials · doi:10.1038/nmat3065 · Cited by 523
Suppression of Phase Separation in LiFePO4 Nanoparticles During Battery Discharge
Bai, P., Cogswell, D. A., & Bazant, M. Z. (2011) · Nano Letters · doi:10.1021/nl202764f · Cited by 490
A Mathematical Model of Stress Generation and Fracture in Lithium Manganese Oxide
Christensen, J., & Newman, J. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2185287 · Cited by 485
Self-citationLayered lithium transition metal oxide cathodes towards high energy lithium-ion batteries
He, P., Yu, H., Li, D., & Zhou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14305d · Cited by 472
Direct in situ measurements of Li transport in Li-ion battery negative electrodes
Harris, S. J., Timmons, A., Baker, D. R., & Monroe, C. (2010) · Chemical Physics Letters · doi:10.1016/j.cplett.2009.12.033 · Cited by 434
Coherency Strain and the Kinetics of Phase Separation in LiFePO4 Nanoparticles
Cogswell, D. A., & Bazant, M. Z. (2012) · ACS Nano · doi:10.1021/nn204177u · Cited by 411
Prada, E., Di Domenico, D., Creff, Y., Bernard, J., Sauvant-Moynot, V., & Huet, F. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.064209jes · Cited by 398
High‐Performance Carbon‐LiMnPO4 Nanocomposite Cathode for Lithium Batteries
Oh, S., Oh, S., Yoon, C., Scrosati, B., Amine, K., & Sun, Y. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000469 · Cited by 396
Quilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Thermal Model for a Li-Ion Cell
Kumaresan, K., Sikha, G., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2817888 · Cited by 382
Olivine LiFePO4: development and future
Wang, Y., He, P., & Zhou, H. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00176g · Cited by 372
Maxisch, T., Zhou, F., & Ceder, G. (2006) · Physical Review B · doi:10.1103/physrevb.73.104301 · Cited by 364
Operando decoding of chemical and thermal events in commercial Na(Li)-ion cells via optical sensors
Huang, J., Albero Blanquer, L., Bonefacino, J., Logan, E. R., Alves Dalla Corte, D., Delacourt, C., Gallant, B. M., Boles, S. T., Dahn, J. R., Tam, H.-Y., et al. (2020) · Nature Energy · doi:10.1038/s41560-020-0665-y · Cited by 363
Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries
Li, J., Du, Z., Ruther, R. E., AN, S. J., David, L. A., Hays, K., Wood, M., Phillip, N. D., Sheng, Y., Mao, C., et al. (2017) · JOM · doi:10.1007/s11837-017-2404-9 · Cited by 350
Singh, G. K., Ceder, G., & Bazant, M. Z. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.03.083 · Cited by 338
Li, Y., El Gabaly, F., Ferguson, T. R., Smith, R. B., Bartelt, N. C., Sugar, J. D., Fenton, K. R., Cogswell, D. A., Kilcoyne, A. L. D., Tyliszczak, T., et al. (2014) · Nature Materials · doi:10.1038/nmat4084 · Cited by 337
Nonequilibrium Thermodynamics of Porous Electrodes
Ferguson, T. R., & Bazant, M. Z. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.048212jes · Cited by 333
Surfactant based sol–gel approach to nanostructured LiFePO4 for high rate Li-ion batteries
Choi, D., & Kumta, P. N. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.082 · Cited by 322
On state-of-charge determination for lithium-ion batteries
Li, Z., Huang, J., Liaw, B. Y., & Zhang, J. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.03.001 · Cited by 317
Charge transfer kinetics at the solid–solid interface in porous electrodes
Bai, P., & Bazant, M. Z. (2014) · Nature Communications · doi:10.1038/ncomms4585 · Cited by 315
Du, Z., Wood, D. L., Daniel, C., Kalnaus, S., & Li, J. (2017) · Journal of Applied Electrochemistry · doi:10.1007/s10800-017-1047-4 · Cited by 310
Boosting Rechargeable Batteries R&D by Multiscale Modeling: Myth or Reality?
Franco, A. A., Rucci, A., Brandell, D., Frayret, C., Gaberscek, M., Jankowski, P., & Johansson, P. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00239 · Cited by 308
Calculations of Li-Ion Diffusion in Olivine Phosphates
Dathar, G. K. P., Sheppard, D., Stevenson, K. J., & Henkelman, G. (2011) · Chemistry of Materials · doi:10.1021/cm201604g · Cited by 307
Modeling diffusion-induced stress in nanowire electrode structures
Deshpande, R., Cheng, Y.-T., & Verbrugge, M. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.02.021 · Cited by 303
Forman, J. C., Moura, S. J., Stein, J. L., & Fathy, H. K. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.03.009 · Cited by 299
Modeling of a Commercial Graphite/LiFePO4 Cell
Safari, M., & Delacourt, C. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3567007 · Cited by 298
Effects of inhomogeneities - nanoscale to mesoscale - on the durability of Li-Ion batteries
Harris, S. J., & Lu, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp311431z · Cited by 271
Electrochemical–thermal analysis of 18650 Lithium Iron Phosphate cell
Saw, L. H., Ye, Y., & Tay, A. A. O. (2013) · Energy Conversion and Management · doi:10.1016/j.enconman.2013.05.040 · Cited by 275
Synthesis and electrochemical analysis of vapor-deposited carbon-coated LiFePO4
Belharouak, I., Johnson, C., & Amine, K. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.06.019 · Cited by 272
Study of the Li-insertion/extraction process in LiFePO4/FePO4
Ramana, C. V., Mauger, A., Gendron, F., Julien, C. M., & Zaghib, K. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.11.042 · Cited by 268
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Batteries for Electric and Hybrid-Electric Vehicles
Cairns, E. J., & Albertus, P. (2010) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-073009-100942 · Cited by 263
Xu, M., Zhang, Z., Wang, X., Jia, L., & Yang, L. (2015) · Energy · doi:10.1016/j.energy.2014.11.073 · Cited by 262
Franco, A. A. (2013) · RSC Advances · doi:10.1039/c3ra23502e · Cited by 262
Ionic/Electronic Conducting Characteristics of LiFePO[sub 4] Cathode Materials
Wang, C., & Hong, J. (2007) · Electrochemical and Solid-State Letters · doi:10.1149/1.2409768 · Cited by 258
Marcicki, J., Canova, M., Conlisk, A. T., & Rizzoni, G. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.12.120 · Cited by 253
Metadata
- Authors
- Srinivasan, V., & Newman, J.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2004
- Volume
- 151
- Issue
- 10
- Pages
- A1517
- ISSN
- 0013-4651 (ISSN-L)
- OpenAlex
- W2130893993
- Cited by
- 730
- References
- 23
- FWCI
- 15.70
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.