The DOI matches its Crossref record.
Self‐Discharge of LiMn2 O 4/C Li‐Ion Cells in Their Discharged State: Understanding by Means of Three‐Electrode Measurements
Open accessAbstract
The potential distribution through plastic Li‐ion cells during electrochemical testing was monitored by means of three‐ or four‐electrode measurements in order to determine the origin of the poor electrochemical performance (namely, premature cell failure, poor storage performance in the discharged state) of /C Li‐ion cells encountered at 55°C. Several approaches to insert reliably one or two reference electrodes that can be either metallic lithium or an insertion compound such as into plastic Li‐ion batteries are reported. Using a reference electrode, information regarding the evolution of ( i ) the state of charge of each electrode within a Li‐ion cell, ( ii ) their polarization, and ( iii ) their rate capability can be obtained. From these three‐electrode electrochemical measurements, coupled with chemical analyses, X‐ray diffraction, and microscopy studies, one unambiguously concludes that the poor 55°C performance is mainly due to the instability of the phase toward Mn dissolution in ‐type electrolytes. A mechanism, based on Mn dissolution, is proposed to account for the poor storage performance of /C Li‐ion cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
Ageing mechanisms in lithium-ion batteries
Vetter, J., Novák, P., Wagner, M. R., Veit, C., Möller, K.-C., Besenhard, J. O., Winter, M., Wohlfahrt-Mehrens, M., Vogler, C., & Hammouche, A. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.01.006 · Cited by 3,987
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Asenbauer, J., Eisenmann, T., Kuenzel, M., Kazzazi, A., Chen, Z., & Bresser, D. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00175a · Cited by 1,295
Temperature dependent ageing mechanisms in Lithium-ion batteries – A Post-Mortem study
Waldmann, T., Wilka, M., Kasper, M., Fleischhammer, M., & Wohlfahrt-Mehrens, M. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.03.112 · Cited by 1,203
Lithium ion battery degradation: what you need to know
Edge, J. S., O’Kane, S., Prosser, R., Kirkaldy, N. D., Patel, A. N., Hales, A., Ghosh, A., Ai, W., Chen, J., Yang, J., et al. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp00359c · Cited by 1,189
On the use of vinylene carbonate (VC) as an additive to electrolyte solutions for Li-ion batteries
Aurbach, D., Gamolsky, K., Markovsky, B., Gofer, Y., Schmidt, M., & Heider, U. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00858-1 · Cited by 992
The cathode–electrolyte interface in the Li-ion battery
Edström, K., Gustafsson, T., & Thomas, J. O. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.03.049 · Cited by 900
Li plating as unwanted side reaction in commercial Li-ion cells – A review
Waldmann, T., Hogg, B.-I., & Wohlfahrt-Mehrens, M. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.063 · Cited by 895
Palacín, M. R., & de Guibert, A. (2016) · Science · doi:10.1126/science.1253292 · Cited by 871
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Graphene in lithium ion battery cathode materials: A review
Kucinskis, G., Bajars, G., & Kleperis, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.160 · Cited by 628
Zhan, C., Lu, J., Jeremy Kropf, A., Wu, T., Jansen, A. N., Sun, Y.-K., Qiu, X., & Amine, K. (2013) · Nature Communications · doi:10.1038/ncomms3437 · Cited by 538
Reversible and High‐Capacity Nanostructured Electrode Materials for Li‐Ion Batteries
Kim, M. G., & Cho, J. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200801095 · Cited by 499
Fundamentals and Challenges of Lithium Ion Batteries at Temperatures between −40 and 60 °C
Hou, J., Yang, M., Wang, D., & Zhang, J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904152 · Cited by 419
One-Step Low-Temperature Route for the Preparation of Electrochemically Active LiMnPO4 Powders
Delacourt, C., Poizot, P., Morcrette, M., Tarascon, J.-M., & Masquelier, C. (2004) · Chemistry of Materials · doi:10.1021/cm030347b · Cited by 406
Self-citationLithium-ion battery degradation: how to model it
O'Kane, S. E. J., Ai, W., Madabattula, G., Alonso-Alvarez, D., Timms, R., Sulzer, V., Edge, J. S., Wu, B., Offer, G. J., & Marinescu, M. (2022) · Physical Chemistry Chemical Physics · doi:10.1039/d2cp00417h · Cited by 400
Yi, T.-F., Mei, J., & Zhu, Y.-R. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.03.070 · Cited by 398
Nanostructured Anode Material for High‐Power Battery System in Electric Vehicles
Amine, K., Belharouak, I., Chen, Z., Tran, T., Yumoto, H., Ota, N., Myung, S., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000441 · Cited by 396
High‐Performance Carbon‐LiMnPO4 Nanocomposite Cathode for Lithium Batteries
Oh, S., Oh, S., Yoon, C., Scrosati, B., Amine, K., & Sun, Y. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000469 · Cited by 396
Lithium Manganese Spinel Cathodes for Lithium‐Ion Batteries
Huang, Y., Dong, Y., Li, S., Lee, J., Wang, C., Zhu, Z., Xue, W., Li, Y., & Li, J. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202000997 · Cited by 374
Reed, J., & Ceder, G. (2004) · Chemical Reviews · doi:10.1021/cr020733x · Cited by 373
Yang, Z., Huang, H., & Lin, F. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202200383 · Cited by 366
A First-Principles Approach to Studying the Thermal Stability of Oxide Cathode Materials
Wang, L., Maxisch, T., & Ceder, G. (2007) · Chemistry of Materials · doi:10.1021/cm0620943 · Cited by 359
Aging Mechanisms of LiFePO[sub 4] Batteries Deduced by Electrochemical and Structural Analyses
Liu, P., Wang, J., Hicks-Garner, J., Sherman, E., Soukiazian, S., Verbrugge, M., Tataria, H., Musser, J., & Finamore, P. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3294790 · Cited by 358
Symmetric cell approach and impedance spectroscopy of high power lithium-ion batteries
Chen, C. H., Liu, J., & Amine, K. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00666-2 · Cited by 347
Factors that affect cycle-life and possible degradation mechanisms of a Li-ion cell based on LiCoO2
Choi, S. S., & Lim, H. S. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00305-1 · Cited by 333
Waldmann, T., Iturrondobeitia, A., Kasper, M., Ghanbari, N., Aguesse, F., Bekaert, E., Daniel, L., Genies, S., Gordon, I. J., Löble, M. W., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1211609jes · Cited by 328
A review of blended cathode materials for use in Li-ion batteries
Chikkannanavar, S. B., Bernardi, D. M., & Liu, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.052 · Cited by 316
Orsini, F., Du Pasquier, A., Beaudoin, B., Tarascon, J. M., Trentin, M., Langenhuizen, N., De Beer, E., & Notten, P. (1998) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00128-1 · Cited by 310
Self-citationA Truncated Manganese Spinel Cathode for Excellent Power and Lifetime in Lithium-Ion Batteries
Kim, J.-S., Kim, K., Cho, W., Shin, W. H., Kanno, R., & Choi, J. W. (2012) · Nano Letters · doi:10.1021/nl303619s · Cited by 307
Komaba, S., Kumagai, N., & Kataoka, Y. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(01)00847-7 · Cited by 300
The elevated temperature performance of the LiMn2O4/C system: failure and solutions
Amatucci, G., Du Pasquier, A., Blyr, A., Zheng, T., & Tarascon, J.-M. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00209-1 · Cited by 288
Self-citationRecent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
A Comprehensive Capacity Fade Model and Analysis for Li-Ion Batteries
Lin, X., Park, J., Liu, L., Lee, Y., Sastry, A. M., & Lu, W. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.040310jes · Cited by 265
Aging Analysis of Graphite/LiNi1/3Mn1/3Co1/3O2Cells Using XRD, PGAA, and AC Impedance
Buchberger, I., Seidlmayer, S., Pokharel, A., Piana, M., Hattendorff, J., Kudejova, P., Gilles, R., & Gasteiger, H. A. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0721514jes · Cited by 264
Nölle, R., Beltrop, K., Holtstiege, F., Kasnatscheew, J., Placke, T., & Winter, M. (2020) · Materials Today · doi:10.1016/j.mattod.2019.07.002 · Cited by 258
Characterisation of batteries by electrochemical impedance spectroscopy
Middlemiss, L. A., Rennie, A. J. R., Sayers, R., & West, A. R. (2020) · Energy Reports · doi:10.1016/j.egyr.2020.03.029 · Cited by 236
Merla, Y., Wu, B., Yufit, V., Brandon, N. P., Martinez-Botas, R. F., & Offer, G. J. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.12.122 · Cited by 156
Schmidt, J. P., Weber, A., & Ivers-Tiffée, E. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.10.163 · Cited by 43
Metadata
- Authors
- Blyr, A., Sigala, C., Amatucci, G., Guyomard, D., Chabre, Y., & Tarascon, J. ‐.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1998-01-01
- Volume
- 145
- Issue
- 1
- Pages
- 194-209
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2167642548
- Cited by
- 466
- References
- 0
- FWCI
- 27.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.