The DOI matches its Crossref record.
Solid‐State Redox Reactions of LiCoO2 (R3m) for 4 Volt Secondary Lithium Cells
Abstract
LiCoO 2 (R3m; a = 2.82 Å , c = 14.1 Å in hexagonal setting) was prepared and examined in nonaqueous lithium cells using 1 M LiClO 4 propylene carbonate solution at 30°C. The oxidation of LiCoO 2 and the reduction of Li 1 − x CoO 2 proceeded reversibly in the voltage region above 3.9 V. X‐ray diffraction (XRD) examinations indicated the reaction proceeded in a topotactic manner, i.e. , two‐phase reactions ( 0 < x < 1 / 4 and 3 / 4 < x < 1 in Li 1 − x CoO 2 ) and a single‐phase reaction ( 1 / 4 < x < 3 / 4 ) . A monoclinic phase ( a = 4.91 Å , b = 2.82 Å , c = 5.02 Å , and β = 111.4 ° ) was observed in 3 / 4 < x < 1 in addition to that at about x = 0.45 ) a = 4.90 Å , b = 2.81 Å , c = 5.05 Å , and β = 108.3 ° ) . Detailed open‐circuit voltage measurements were carried out. The open‐circuit voltage are invariable at 3.92 V for 0 < x < 1 / 4 and at 4.50 V for 3 / 4 < x < 1 . The two straight lines are connected smoothly by a composition‐dependent curve for 1 / 4 < x < 3 / 4 , which was consistent with the XRD observations. The differences and similarities between the solid‐state redox reactions of LiCoO 2 and LiNiO 2 were discussed by comparing the structural and electrochemical data. Possible lithium ordering at x = 1 / 4 and 3 / 4 for this type of material is described in terms of a [ 2 × 2 ] superlattice in a triangular lattice of sites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Lithium-ion batteries: outlook on present, future, and hybridized technologies
Kim, T., Song, W., Son, D.-Y., Ono, L. K., & Qi, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c8ta10513h · Cited by 2,479
Positive Electrode Materials for Li-Ion and Li-Batteries
Ellis, B. L., Lee, K. T., & Nazar, L. F. (2010) · Chemistry of Materials · doi:10.1021/cm902696j · Cited by 1,697
Tian, Y., Zeng, G., Rutt, A., Shi, T., Kim, H., Wang, J., Koettgen, J., Sun, Y., Ouyang, B., Chen, T., et al. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00767 · Cited by 1,614
Recent developments in cathode materials for lithium ion batteries
Fergus, J. W. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.089 · Cited by 1,561
Manganese oxides for lithium batteries
Thackeray, M. M. (1997) · Progress in Solid State Chemistry · doi:10.1016/s0079-6786(97)81003-5 · Cited by 1,475
Hydrogels and Hydrogel-Derived Materials for Energy and Water Sustainability
Guo, Y., Bae, J., Fang, Z., Li, P., Zhao, F., & Yu, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00345 · Cited by 1,395
Layered Lithium Insertion Material of LiCo1/3Ni1/3Mn1/3O2 for Lithium-Ion Batteries
Ohzuku, T., & Makimura, Y. (2001) · Chemistry Letters · doi:10.1246/cl.2001.642 · Cited by 1,388
Self-citationAb initio study of lithium intercalation in metal oxides and metal dichalcogenides
Aydinol, M. K., Kohan, A. F., Ceder, G., Cho, K., & Joannopoulos, J. (1997) · Physical Review B · doi:10.1103/physrevb.56.1354 · Cited by 1,388
Fundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Sustainability and in situ monitoring in battery development
Grey, C. P., & Tarascon, J. M. (2017) · Nature Materials · doi:10.1038/nmat4777 · Cited by 1,213
Understanding electrochemical potentials of cathode materials in rechargeable batteries
Liu, C., Neale, Z. G., & Cao, G. (2016) · Materials Today · doi:10.1016/j.mattod.2015.10.009 · Cited by 1,156
Strain-controlled electrocatalysis on multimetallic nanomaterials
Luo, M., & Guo, S. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.59 · Cited by 1,115
Novel lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for advanced lithium-ion batteries
Yabuuchi, N., & Ohzuku, T. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00173-3 · Cited by 870
Self-citationEftekhari, A., Jian, Z., & Ji, X. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b07989 · Cited by 860
Raman Microspectrometry Applied to the Study of Electrode Materials for Lithium Batteries
Baddour-Hadjean, R., & Pereira-Ramos, J.-P. (2010) · Chemical Reviews · doi:10.1021/cr800344k · Cited by 749
First-principles investigation of phase stability inLixCoO2
Van der Ven, A., Aydinol, M. K., Ceder, G., Kresse, G., & Hafner, J. (1998) · Physical Review B · doi:10.1103/physrevb.58.2975 · Cited by 748
Review—Practical Challenges Hindering the Development of Solid State Li Ion Batteries
Kerman, K., Luntz, A., Viswanathan, V., Chiang, Y.-M., & Chen, Z. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1571707jes · Cited by 712
Direct and continuous strain control of catalysts with tunable battery electrode materials
Wang, H., Xu, S., Tsai, C., Li, Y., Liu, C., Zhao, J., Liu, Y., Yuan, H., Abild-Pedersen, F., Prinz, F. B., et al. (2016) · Science · doi:10.1126/science.aaf7680 · Cited by 706
Higher, Stronger, Better…︁ A Review of 5 Volt Cathode Materials for Advanced Lithium‐Ion Batteries
Kraytsberg, A., & Ein‐Eli, Y. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200068 · Cited by 698
Review—Li-Rich Layered Oxide Cathodes for Next-Generation Li-Ion Batteries: Chances and Challenges
Rozier, P., & Tarascon, J. M. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111514jes · Cited by 695
Radin, M. D., Hy, S., Sina, M., Fang, C., Liu, H., Vinckeviciute, J., Zhang, M., Whittingham, M. S., Meng, Y. S., & Van der Ven, A. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602888 · Cited by 677
Xu, S., Hessel, C. M., Ren, H., Yu, R., Jin, Q., Yang, M., Zhao, H., & Wang, D. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43319f · Cited by 661
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Wang, L., Chen, B., Ma, J., Cui, G., & Chen, L. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00322j · Cited by 625
Lithium and lithium ion batteries for applications in microelectronic devices: A review
Wang, Y., Liu, B., Li, Q., Cartmell, S., Ferrara, S., Deng, Z. D., & Xiao, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.03.164 · Cited by 581
Meng, Y. S., & Arroyo-de Dompablo, M. E. (2009) · Energy & Environmental Science · doi:10.1039/b901825e · Cited by 545
Electron Transfer Mechanisms upon Lithium Deintercalation from LiCoO2 to CoO2 Investigated by XPS
Dahéron, L., Dedryvère, R., Martinez, H., Ménétrier, M., Denage, C., Delmas, C., & Gonbeau, D. (2008) · Chemistry of Materials · doi:10.1021/cm702546s · Cited by 533
First-principles theory of ionic diffusion with nondilute carriers
Van der Ven, A., Ceder, G., Asta, M., & Tepesch, P. D. (2001) · Physical Review B · doi:10.1103/physrevb.64.184307 · Cited by 522
Layered lithium transition metal oxide cathodes towards high energy lithium-ion batteries
He, P., Yu, H., Li, D., & Zhou, H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm14305d · Cited by 472
Achievements, Challenges, and Prospects of Calcium Batteries
Arroyo-de Dompablo, M. E., Ponrouch, A., Johansson, P., & Palacín, M. R. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00339 · Cited by 429
An overview of positive-electrode materials for advanced lithium-ion batteries
Ohzuku, T., & Brodd, R. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.154 · Cited by 415
Self-citationSustainable Li‐Ion Batteries: Chemistry and Recycling
Piątek, J., Afyon, S., Budnyak, T. M., Budnyk, S., Sipponen, M. H., & Slabon, A. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003456 · Cited by 410
Maleki Kheimeh Sari, H., & Li, X. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201901597 · Cited by 403
Ohta, S., Komagata, S., Seki, J., Saeki, T., Morishita, S., & Asaoka, T. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.02.073 · Cited by 399
Yabuuchi, N., Makimura, Y., & Ohzuku, T. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2455585 · Cited by 387
Self-citationMao, J., Ye, C., Zhang, S., Xie, F., Zeng, R., Davey, K., Guo, Z., & Qiao, S. (2022) · Energy & Environmental Science · doi:10.1039/d2ee00162d · Cited by 365
ANTOLINI, E. (2004) · Solid State Ionics · doi:10.1016/j.ssi.2004.04.003 · Cited by 361
Yoon, W.-S., Kim, K.-B., Kim, M.-G., Lee, M.-K., Shin, H.-J., Lee, J.-M., Lee, J.-S., & Yo, C.-H. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013735e · Cited by 357
Direct recovery: A sustainable recycling technology for spent lithium-ion battery
Wu, J., Zheng, M., Liu, T., Wang, Y., Liu, Y., Nai, J., Zhang, L., Zhang, S., & Tao, X. (2023) · Energy Storage Materials · doi:10.1016/j.ensm.2022.09.029 · Cited by 356
Lu, Y.-C., Mansour, A. N., Yabuuchi, N., & Shao-Horn, Y. (2009) · Chemistry of Materials · doi:10.1021/cm900862v · Cited by 348
Anionic Redox in Rechargeable Lithium Batteries
Li, B., & Xia, D. (2017) · Advanced Materials · doi:10.1002/adma.201701054 · Cited by 338
Mechanical properties of cathode materials for lithium-ion batteries
Stallard, J. C., Wheatcroft, L., Booth, S. G., Boston, R., Corr, S. A., De Volder, M. F. L., Inkson, B. J., & Fleck, N. A. (2022) · Joule · doi:10.1016/j.joule.2022.04.001 · Cited by 336
Lithium diffusion mechanisms in layered intercalation compounds
Van der Ven, A., & Ceder, G. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00638-3 · Cited by 312
Lithium‐ and Manganese‐Rich Oxide Cathode Materials for High‐Energy Lithium Ion Batteries
Wang, J., He, X., Paillard, E., Laszczynski, N., Li, J., & Passerini, S. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600906 · Cited by 309
Kim, U., Ryu, H., Kim, J., Mücke, R., Kaghazchi, P., Yoon, C. S., & Sun, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803902 · Cited by 298
Hou, P., Yin, J., Ding, M., Huang, J., & Xu, X. (2017) · Small · doi:10.1002/smll.201701802 · Cited by 289
Atomic resolution of lithium ions in LiCoO2
Shao-Horn, Y., Croguennec, L., Delmas, C., Nelson, E. C., & O'Keefe, M. A. (2003) · Nature Materials · doi:10.1038/nmat922 · Cited by 273
Significant improvement of high voltage cycling behavior AlF3-coated LiCoO2 cathode
SUN, Y., HAN, J., MYUNG, S., LEE, S., & AMINE, K. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.03.040 · Cited by 273
Wang, K., Wan, J., Xiang, Y., Zhu, J., Leng, Q., Wang, M., Xu, L., & Yang, Y. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228062 · Cited by 268
Ohta, S., Seki, J., Yagi, Y., Kihira, Y., Tani, T., & Asaoka, T. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.04.065 · Cited by 267
Roles of Surface Chemistry on Safety and Electrochemistry in Lithium Ion Batteries
Lee, K. T., Jeong, S., & Cho, J. (2013) · Accounts of Chemical Research · doi:10.1021/ar200224h · Cited by 267
Rechargeable Alkali-Ion Battery Materials: Theory and Computation
Van der Ven, A., Deng, Z., Banerjee, S., & Ong, S. P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00601 · Cited by 264
Yoon, C. S., Ryu, H.-H., Park, G.-T., Kim, J.-H., Kim, K.-H., & Sun, Y.-K. (2018) · Journal of Materials Chemistry A · doi:10.1039/c7ta11346c · Cited by 263
Structural Understanding for High‐Voltage Stabilization of Lithium Cobalt Oxide
Lin, C., Li, J., Yin, Z., Huang, W., Zhao, Q., Weng, Q., Liu, Q., Sun, J., Chen, G., & Pan, F. (2024) · Advanced Materials · doi:10.1002/adma.202307404 · Cited by 256
Cheon, G., Duerloo, K.-A. N., Sendek, A. D., Porter, C., Chen, Y., & Reed, E. J. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b05229 · Cited by 217
Pham, H. Q., Chung, G. J., Han, J., Hwang, E.-H., Kwon, Y.-G., & Song, S.-W. (2020) · The Journal of Chemical Physics · doi:10.1063/1.5144280 · Cited by 26
Metadata
- Authors
- Ohzuku, T., & Ueda, A.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 1994-11-01
- Volume
- 141
- Issue
- 11
- Pages
- 2972-2977
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1942286180
- Cited by
- 951
- References
- 0
- FWCI
- 13.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.