The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Review—Lithium Plating Detection Methods in Li-Ion Batteries
Open accessAbstract
Lithium-ion batteries (LiB) offer a low-cost, long cycle-life and high energy density solution to the automotive industry. There is a growing need of fast charging batteries for commercial application. However, under certain conditions of high currents and/or low temperatures, the chance for Li plating increases. If the anode surface potential falls below 0 V vs Li/Li+, the formation of metallic Li is thermodynamically feasible. Therefore, determination of accurate Li plating curve is crucial in estimating the boundary conditions for battery operation without compromising life and safety. There are various electrochemical and analytical methods that are employed in deducing the Li plating boundary of the Li-ion batteries. The present paper reviews the common test methods and analysis that are currently utilized in Li plating determination. Knowledge gaps are identified, and recommendations are made for the future development in the determination and verification of Li plating curve in terms of modeling and analysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Accurate electrical battery model capable of predicting runtime and I-V performance
Chen, M., & Rincon-Mora, G. A. (2006) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2006.874229 · Cited by 2,427
Degradation diagnostics for lithium ion cells
Birkl, C. R., Roberts, M. R., McTurk, E., Bruce, P. G., & Howey, D. A. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.12.011 · Cited by 1,945
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Waag, W., Käbitz, S., & Sauer, D. U. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.09.030 · Cited by 987
Pinson, M. B., & Bazant, M. Z. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.044302jes · Cited by 946
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Rapid test and non-linear model characterisation of solid-state lithium-ion batteries
Abu-Sharkh, S., & Doerffel, D. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.001 · Cited by 366
Electron paramagnetic resonance imaging for real-time monitoring of Li-ion batteries
Sathiya, M., Leriche, J.-B., Salager, E., Gourier, D., Tarascon, J.-M., & Vezin, H. (2015) · Nature Communications · doi:10.1038/ncomms7276 · Cited by 312
Cited by
Fan, X., Zhong, C., Liu, J., Ding, J., Deng, Y., Han, X., Zhang, L., Hu, W., Wilkinson, D. P., & Zhang, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00196 · Cited by 347
Effect of Low Temperature on Electric Vehicle Range
Steinstraeter, M., Heinrich, T., & Lienkamp, M. (2021) · World Electric Vehicle Journal · doi:10.3390/wevj12030115 · Cited by 122
Metadata
- Authors
- Janakiraman, U., Garrick, T. R., & Fortier, M. E.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2020-12-01
- Volume
- 167
- Issue
- 16
- Pages
- 160552
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W3112368936
- Cited by
- 169
- References
- 13
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review—Lithium Plating Detection Methods in Li-Ion Batteries. https://app.cochat.ai/papers/10.1149/1945-7111/abd3b8
- The paper
- Janakiraman, U., Garrick, T. R., & Fortier, M. E. (2020). Review—Lithium Plating Detection Methods in Li-Ion Batteries. Journal of The Electrochemical Society. https://doi.org/10.1149/1945-7111/abd3b8
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.