The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Rechargeable Batteries: Grasping for the Limits of Chemistry
Open accessAbstract
The demand for rechargeable batteries with high gravimetric and volumetric energy density will continue to grow due to the rapidly increasing integration of renewable energy into the global energy scheme. In terms of energy density, modern high-end rechargeable-battery technology is reaching its fundamental limits and no big advancement leaps in this field are expected. The energy-cost model, developed for comparative evaluation of battery cell chemistries in a commercial type pouch cell configuration, helps us to find the relationship between cost and energy density, enabling the prediction of the most promising material combinations for near-future non-aqueous rechargeable batteries for portable electronics and automotive applications. Among the wide variety of positive electrode materials only few show enough potential for commercialization, and, clearly, the immediate future will still be dominated by Li-ion technology, with Li-rich and Ni-rich materials as definite winners, and with Li–S and Na-ion emerging as contestants due to low cost and abundance of their key components. As further significant improvements in gravimetric/volumetric energy density and cost cannot be achieved through new battery chemistries, then the engineering, targeting cost reduction and safety assurance, will most likely be the main driving force behind future rechargeable battery development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Opportunities and challenges for a sustainable energy future
Chu, S., & Majumdar, A. (2012) · Nature · doi:10.1038/nature11475 · Cited by 12,550
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
Towards greener and more sustainable batteries for electrical energy storage
Larcher, D., & Tarascon, J.-M. (2015) · Nature Chemistry · doi:10.1038/nchem.2085 · Cited by 7,872
Research Development on Sodium-Ion Batteries
Yabuuchi, N., Kubota, K., Dahbi, M., & Komaba, S. (2014) · Chemical Reviews · doi:10.1021/cr500192f · Cited by 6,478
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Lithium metal anodes for rechargeable batteries
Xu, W., Wang, J., Ding, F., Chen, X., Nasybulin, E., Zhang, Y., & Zhang, J.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee40795k · Cited by 4,704
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Self-citationA review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Self-citationElectrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Cabana, J., Monconduit, L., Larcher, D., & Palacín, M. R. (2010) · Advanced Materials · doi:10.1002/adma.201000717 · Cited by 2,361
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Komaba, S., Murata, W., Ishikawa, T., Yabuuchi, N., Ozeki, T., Nakayama, T., Ogata, A., Gotoh, K., & Fujiwara, K. (2011) · Advanced Functional Materials · doi:10.1002/adfm.201100854 · Cited by 2,116
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Ji, X., & Nazar, L. F. (2010) · Journal of Materials Chemistry · doi:10.1039/b925751a · Cited by 1,967
Nanostructured sulfur cathodes
Yang, Y., Zheng, G., & Cui, Y. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35256g · Cited by 1,947
High-energy cathode material for long-life and safe lithium batteries
Sun, Y.-K., Myung, S.-T., Park, B.-C., Prakash, J., Belharouak, I., & Amine, K. (2009) · Nature Materials · doi:10.1038/nmat2418 · Cited by 1,519
Ultimate Limits to Intercalation Reactions for Lithium Batteries
Whittingham, M. S. (2014) · Chemical Reviews · doi:10.1021/cr5003003 · Cited by 1,130
Nonaqueous Li–Air Batteries: A Status Report
Luntz, A. C., & McCloskey, B. D. (2014) · Chemical Reviews · doi:10.1021/cr500054y · Cited by 925
Origin of voltage decay in high-capacity layered oxide electrodes
Sathiya, M., Abakumov, A. M., Foix, D., Rousse, G., Ramesha, K., Saubanère, M., Doublet, M. L., Vezin, H., Laisa, C. P., Prakash, A. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4137 · Cited by 922
History, Evolution, and Future Status of Energy Storage
Whittingham, M. S. (2012) · Proceedings of the IEEE · doi:10.1109/jproc.2012.2190170 · Cited by 873
Carbon–sulfur composites for Li–S batteries: status and prospects
Wang, D.-W., Zeng, Q., Zhou, G., Yin, L., Li, F., Cheng, H.-M., Gentle, I. R., & Lu, G. Q. M. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11045a · Cited by 816
Na2Ti3O7: Lowest Voltage Ever Reported Oxide Insertion Electrode for Sodium Ion Batteries
Senguttuvan, P., Rousse, G., Seznec, V., Tarascon, J.-M., & Palacín, M. R. (2011) · Chemistry of Materials · doi:10.1021/cm202076g · Cited by 807
Practical Handbook of Physical Properties of Rocks and Minerals (1988)
Carmichael, R. S. (2017) · CRC Press eBooks · doi:10.1201/9780203710968 · Cited by 777
Rougier, A., Gravereau, P., & Delmas, C. (1996) · Journal of The Electrochemical Society · doi:10.1149/1.1836614 · Cited by 609
Recent Achievements on Inorganic Electrode Materials for Lithium-Ion Batteries
Croguennec, L., & Palacín, M. R. (2015) · Journal of the American Chemical Society · doi:10.1021/ja507828x · Cited by 539
Structural Design of Cathodes for Li‐S Batteries
Pope, M. A., & Aksay, I. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500124 · Cited by 500
From lithium to sodium: Cell chemistry of room temperature sodium–air and sodium–sulfur batteries
Adelhelm, P., Hartmann, P., Bender, C. L., Busche, M., Eufinger, C., & Janek, J. (2015) · Beilstein Journal of Nanotechnology · doi:10.3762/bjnano.6.105 · Cited by 478
Boulineau, A., Simonin, L., Colin, J.-F., Bourbon, C., & Patoux, S. (2013) · Nano Letters · doi:10.1021/nl4019275 · Cited by 467
Quantifying the promise of lithium–air batteries for electric vehicles
Gallagher, K. G., Goebel, S., Greszler, T., Mathias, M., Oelerich, W., Eroglu, D., & Srinivasan, V. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43870h · Cited by 460
A New High-Energy Cathode for a Na-Ion Battery with Ultrahigh Stability
Park, Y.-U., Seo, D.-H., Kwon, H.-S., Kim, B., Kim, J., Kim, H., Kim, I., Yoo, H.-I., & Kang, K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406016j · Cited by 442
Zheng, H., Sun, Q., Liu, G., Song, X., & Battaglia, V. S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.01.122 · Cited by 433
Na2Ti3O7: an intercalation based anode for sodium-ion battery applications
Rudola, A., Saravanan, K., Mason, C. W., & Balaya, P. (2013) · Journal of Materials Chemistry A · doi:10.1039/c2ta01057g · Cited by 421
Progress Towards Commercially Viable Li–S Battery Cells
Urbonaite, S., Poux, T., & Novák, P. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500118 · Cited by 406
Self-citationModeling the performance and cost of lithium-ion batteries for electric-drive vehicles.
Nelson, P., Gallagher, K., Bloom, I., & Dees, D. (2011) · doi:10.2172/1027714 · Cited by 238
Performance of LiNiCoO2 materials for advanced lithium-ion batteries
Itou, Y., & Ukyo, Y. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.03.091 · Cited by 209
Jarry, A., Gottis, S., Yu, Y.-S., Roque-Rosell, J., Kim, C., Cabana, J., Kerr, J., & Kostecki, R. (2015) · Journal of the American Chemical Society · doi:10.1021/ja5116698 · Cited by 206
Cost modeling of lithium‐ion battery cells for automotive applications
Patry, G., Romagny, A., Martinet, S., & Froelich, D. (2015) · Energy Science & Engineering · doi:10.1002/ese3.47 · Cited by 194
Electrochemical and thermal properties of hard carbon-type anodes for Na-ion batteries
Zhao, J., Zhao, L., Chihara, K., Okada, S., Yamaki, J.-I., Matsumoto, S., Kuze, S., & Nakane, K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.109 · Cited by 182
Tool for Tortuosity Estimation in Lithium Ion Battery Porous Electrodes
Ebner, M., & Wood, V. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0111502jes · Cited by 181
Heß, M., & Novák, P. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.056 · Cited by 148
Self-citationInternational Meeting on Lithium Batteries.
Smith, J. J. (1983) · NASA STI/Recon Technical Report N · Cited by 83
Importance of ‘unimportant’ experimental parameters in Li–S battery development
Trabesinger, S., & Novák, P. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.10.095 · Cited by 80
Self-citationVillevieille, C., Ebner, M., Gómez‐Cámer, J. L., Marone, F., Novák, P., & Wood, V. C. (2015) · Advanced Materials · doi:10.1002/adma.201403792 · Cited by 50
Self-citationThe Impact of Electrolyte Additives Determined Using Isothermal Microcalorimetry
Downie, L. E., Nelson, K. J., Petibon, R., Chevrier, V. L., & Dahn, J. R. (2013) · ECS Electrochemistry Letters · doi:10.1149/2.010310eel · Cited by 40
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Issues and opportunities facing aqueous zinc-ion batteries
Tang, B., Shan, L., Liang, S., & Zhou, J. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02526j · Cited by 2,182
Polymer-Based Organic Batteries
Muench, S., Wild, A., Friebe, C., Häupler, B., Janoschka, T., & Schubert, U. S. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00070 · Cited by 1,163
Odyssey of Multivalent Cathode Materials: Open Questions and Future Challenges
Canepa, P., Sai Gautam, G., Hannah, D. C., Malik, R., Liu, M., Gallagher, K. G., Persson, K. A., & Ceder, G. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00614 · Cited by 1,159
Metadata
- Authors
- Berg, E. J., Villevieille, C., Streich, D., Trabesinger, S., & Novák, P.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2015
- Volume
- 162
- Issue
- 14
- Pages
- A2468-A2475
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2252945038
- Cited by
- 270
- References
- 45
- FWCI
- 12.19
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.