Gravure Coating for Roll-to-Roll Manufacturing of Proton-Exchange-Membrane Fuel Cell Catalyst Layers
Open accessThe DOI matches its Crossref record; 31 of the 33 references it cites were found in a registry or an index.
Abstract
In this work, we demonstrate gravure coating as a highly relevant technology for the production of roll-to-roll coated catalyst layers. Our results showed gravure coating is capable of coating multi-meter lengths of platinum on carbon catalyst layers at industrially-relevant loadings. Multiple characterization methods were used to examine the microscale and macroscale morphology of the coated layer. Using full-web inspection it was shown that gravure coating produced uniform films in both the cross-web and down-web directions. Using electron microscopy, it was observed that gravure coating produced catalyst layers with larger pores than catalyst layers produced by ultrasonic spray coating. In situ performance testing of the gravure-coated electrodes showed promising results, though additional modifications to the catalyst layer ink and/or drying process are needed to match the catalytic activity of spray-coated catalyst layers. This study lays the foundation for future process science studies to understand the science of scale up.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The penetration degree depends on the deposition method due to the difference in the viscosity of the used ink or the drying rates for various coating techniques [38].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, for screen printing, slot-die coating, or gravure coating, the viscosity of the catalyst ink needs to be increased [38,39].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The ink coating techniques commonly used include spray coating, brush coating, doctor blades coating, screen printing, inkjet-print coating, slot-die coating, or gravure coating [29,38,170].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In addition to the composition and preparation process of the catalyst ink, the CL formation process, namely, depositing catalyst ink onto a substrate by ink coating techniques and then drying to form a CL, also regulates the morphology and structure of CL, e.g., thickness [162], uniformity [163], porosity [38,162], cracking [104], surface roughness [38], ionomer distribution [41]; thereby impact”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The slot-die-coated or gravure-coated CLs show significantly larger porosity or thickness than the spray-coated CLs, because of the concentrated ink and the application of the ink at one time [38].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measured
6 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
(1997) · Springer eBooks · doi:10.1007/978-94-011-5342-3 · Cited by 442
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Morphological features (defects) in fuel cell membrane electrode assemblies
Kundu, S., Fowler, M. W., Simon, L. C., & Grot, S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.027 · Cited by 244
Drying regime maps for particulate coatings
Cardinal, C. M., Jung, Y. D., Ahn, K. H., & Francis, L. F. (2010) · AIChE Journal · doi:10.1002/aic.12190 · Cited by 154
Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Effects of Catalyst Carbon Support on Proton Conduction and Cathode Performance in PEM Fuel Cells
Liu, Y., Ji, C., Gu, W., Jorné, J., & Gasteiger, H. A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3562945 · Cited by 132
Fernández, R., Ferreira-Aparicio, P., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.048 · Cited by 120
3D Failure Analysis of Pure Mechanical and Pure Chemical Degradation in Fuel Cell Membranes
Singh, Y., Orfino, F. P., Dutta, M., & Kjeang, E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0451713jes · Cited by 107
Coating and Drying Defects: Troubleshooting Operating Problems
Gutoff, E. B., & Cohen, E. D. (2006) · Wiley eBooks · doi:10.1002/0470044136 · Cited by 106
Clustering and Percolation in Suspensions of Carbon Black
Richards, J. J., Hipp, J. B., Riley, J. K., Wagner, N. J., & Butler, P. D. (2017) · Langmuir · doi:10.1021/acs.langmuir.7b02538 · Cited by 102
The Effect of Mechanical Fatigue on the Lifetimes of Membrane Electrode Assemblies
Pestrak, M. T., Li, Y., Case, S. W., Dillard, D., Ellis, M. W., Lai, Y.-H., & Gittleman, C. S. (2010) · Journal of Electrochemical Energy Conversion and Storage · doi:10.1115/1.4000629 · Cited by 85
Xu, F., Zhang, H., Ilavsky, J., Stanciu, L., Ho, D., Justice, M. J., Petrache, H. I., & Xie, J. (2010) · Langmuir · doi:10.1021/la1028228 · Cited by 82
Roll-to-roll coated PBI membranes for high temperature PEM fuel cells
Steenberg, T., Hjuler, H. A., Terkelsen, C., Sánchez, M. T. R., Cleemann, L. N., & Krebs, F. C. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02936g · Cited by 76
Kusano, T., Hiroi, T., Amemiya, K., Ando, M., Takahashi, T., & Shibayama, M. (2015) · Polymer Journal · doi:10.1038/pj.2015.36 · Cited by 74
Fabrication of a thin catalyst layer using organic solvents
Yang, T.-H., Yoon, Y.-G., Park, G.-G., Lee, W.-Y., & Kim, C.-S. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.09.018 · Cited by 74
Kim, S. M., Ahn, C.-Y., Cho, Y.-H., Kim, S., Hwang, W., Jang, S., Shin, S., Lee, G., Sung, Y.-E., & Choi, M. (2016) · Scientific Reports · doi:10.1038/srep26503 · Cited by 73
SANS studies on catalyst ink of fuel cell
Shibayama, M., Matsunaga, T., Kusano, T., Amemiya, K., Kobayashi, N., & Yoshida, T. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39842 · Cited by 66
Mauger, S. A., Neyerlin, K. C., Alia, S. M., Ngo, C., Babu, S. K., Hurst, K. E., Pylypenko, S., Litster, S., & Pivovar, B. S. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1061803jes · Cited by 44
Self-citationZenyuk, I. V., Taspinar, R., Kalidindi, A. R., Kumbur, E. C., & Litster, S. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.0161411jes · Cited by 42
Khandavalli, S., & Rothstein, J. P. (2017) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2017.02.005 · Cited by 36
Fultz, D. W., & Chuang, P.-Y. A. (2011) · Journal of Fuel Cell Science and Technology · doi:10.1115/1.4003632 · Cited by 35
The effect of shear-thickening on liquid transfer from an idealized gravure cell
Khandavalli, S., Lee, J. A., Pasquali, M., & Rothstein, J. P. (2015) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2015.03.007 · Cited by 25
Defect Detection in Fuel Cell Gas Diffusion Electrodes Using Infrared Thermography
Ulsh, M., Porter, J. M., Bittinat, D. C., & Bender, G. (2016) · Fuel Cells · doi:10.1002/fuce.201500137 · Cited by 23
Self-citationLiquid transfer from single cavities to rotating rolls
Campana, D. M., & Carvalho, M. S. (2014) · Journal of Fluid Mechanics · doi:10.1017/jfm.2014.175 · Cited by 21
Predicting fluid penetration during slot die coating onto porous substrates
Ding, X., Fuller, T. F., & Harris, T. A. L. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2013.05.039 · Cited by 18
Reactive impinging-flow technique for polymer-electrolyte-fuel-cell electrode-defect detection
Zenyuk, I. V., Englund, N., Bender, G., Weber, A. Z., & Ulsh, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.09.109 · Cited by 17
Self-citationElastohydrodynamic Coating Systems
Pranckh, F. R., & Coyle, D. J. (1997) · Springer eBooks · doi:10.1007/978-94-011-5342-3_17 · Cited by 15
Stähler, M., & Friedrich, I. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.05.073 · Cited by 8
Neyerlin, K. C., Christ, J. M., Zack, J. W., Gu, W., Kumaraguru, S., Kongkanand, A., & Kocha, S. S. (2016) · ECS Meeting Abstracts · doi:10.1149/ma2016-02/38/2492 · Cited by 5
Self-citation
Research works printed but not linked: 1
- Myers D. , Rationally Designed Catalyst Layers for PEMFC Performance Optimization, 2016 DOE Hydrogen and Fuel Cell Program Review. (2016).
Cited by
Status and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“For example, the solid content of inks required for spraying is relatively low, whereas the solid content of inks required for the gravure coating technique can be relatively high [21].”
BackgroundMethodInfluentialYang, G., Lee, C., Qiao, X., Babu, S. K., Martinez, U., & Spendelow, J. S. (2024) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00208-3 · Cited by 156
Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Self-citation
Metadata
- Authors
- Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M.
- Affiliations
- National Laboratory of the Rockies (US)
- Colorado School of Mines (US)
- Oak Ridge National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2018
- Volume
- 165
- Issue
- 11
- Pages
- F1012-F1018
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2890145237
- Cited by
- 81
- References
- 33
- Citations by year
- 2026: 13 · 2025: 8 · 2024: 12 · 2023: 7 · 2022: 14 · 2021: 12 · 2020: 9 · 2019: 6
- FWCI
- 2.58
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Department of Energy (DE-AC36-08GO28308)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- roll-to-roll processing, proton exchange membrane fuel cells, catalyst layer, platinum on carbon, ultrasonic spray coating, coating uniformity, film morphology, electrode performance, scale-up
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.