Gravure Coating for Roll-to-Roll Manufacturing of Proton-Exchange-Membrane Fuel Cell Catalyst Layers
Open accessThe DOI matches its Crossref record; 31 of the 33 references it cites were found in a registry or an index.
Abstract
In this work, we demonstrate gravure coating as a highly relevant technology for the production of roll-to-roll coated catalyst layers. Our results showed gravure coating is capable of coating multi-meter lengths of platinum on carbon catalyst layers at industrially-relevant loadings. Multiple characterization methods were used to examine the microscale and macroscale morphology of the coated layer. Using full-web inspection it was shown that gravure coating produced uniform films in both the cross-web and down-web directions. Using electron microscopy, it was observed that gravure coating produced catalyst layers with larger pores than catalyst layers produced by ultrasonic spray coating. In situ performance testing of the gravure-coated electrodes showed promising results, though additional modifications to the catalyst layer ink and/or drying process are needed to match the catalytic activity of spray-coated catalyst layers. This study lays the foundation for future process science studies to understand the science of scale up.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source doesn’t support the claim as written.
In the citing paper
“The penetration degree depends on the deposition method due to the difference in the viscosity of the used ink or the drying rates for various coating techniques [38].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Checked by a reasoning model — may be wrong.
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“However, for screen printing, slot-die coating, or gravure coating, the viscosity of the catalyst ink needs to be increased [38,39].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The ink coating techniques commonly used include spray coating, brush coating, doctor blades coating, screen printing, inkjet-print coating, slot-die coating, or gravure coating [29,38,170].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“In addition to the composition and preparation process of the catalyst ink, the CL formation process, namely, depositing catalyst ink onto a substrate by ink coating techniques and then drying to form a CL, also regulates the morphology and structure of CL, e.g., thickness [162], uniformity [163], porosity [38,162], cracking [104], surface roughness [38], ionomer distribution [41]; thereby impact”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“The slot-die-coated or gravure-coated CLs show significantly larger porosity or thickness than the spray-coated CLs, because of the concentrated ink and the application of the ink at one time [38].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [38]
Experimental — accuracy not yet measured
6 more claims about this paper
Create a free account to see every claim other papers make about this one.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
(1997) · Springer eBooks · doi:10.1007/978-94-011-5342-3 · Cited by 442
A review of the operating limits in slot die coating processes
Ding, X., Liu, J., & Harris, T. A. L. (2016) · AIChE Journal · doi:10.1002/aic.15268 · Cited by 294
Morphological features (defects) in fuel cell membrane electrode assemblies
Kundu, S., Fowler, M. W., Simon, L. C., & Grot, S. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.027 · Cited by 244
Drying regime maps for particulate coatings
Cardinal, C. M., Jung, Y. D., Ahn, K. H., & Francis, L. F. (2010) · AIChE Journal · doi:10.1002/aic.12190 · Cited by 154
Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b03005 · Cited by 143
Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0961706jes · Cited by 137
Effects of Catalyst Carbon Support on Proton Conduction and Cathode Performance in PEM Fuel Cells
Liu, Y., Ji, C., Gu, W., Jorné, J., & Gasteiger, H. A. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3562945 · Cited by 132
Fernández, R., Ferreira-Aparicio, P., & Daza, L. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.02.048 · Cited by 120
3D Failure Analysis of Pure Mechanical and Pure Chemical Degradation in Fuel Cell Membranes
Singh, Y., Orfino, F. P., Dutta, M., & Kjeang, E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0451713jes · Cited by 107
Research works printed but not linked: 1
- Myers D. , Rationally Designed Catalyst Layers for PEMFC Performance Optimization, 2016 DOE Hydrogen and Fuel Cell Program Review. (2016).
Cited by
Status and perspectives of key materials for PEM electrolyzer
Zhang, K., Liang, X., Wang, L., Sun, K., Wang, Y., Xie, Z., Wu, Q., Bai, X., Hamdy, M. S., Chen, H., et al. (2022) · Nano Research Energy · doi:10.26599/nre.2022.9120032 · Cited by 497
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
Self-citationThe Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“For example, the solid content of inks required for spraying is relatively low, whereas the solid content of inks required for the gravure coating technique can be relatively high [21].”
BackgroundMethodInfluentialYang, G., Lee, C., Qiao, X., Babu, S. K., Martinez, U., & Spendelow, J. S. (2024) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00208-3 · Cited by 156
Roll-to-roll production of catalyst coated membranes for low-temperature electrolyzers
Park, J., Kang, Z., Bender, G., Ulsh, M., & Mauger, S. A. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228819 · Cited by 115
Self-citationOsmieri, L., Wang, G., Cetinbas, F. C., Khandavalli, S., Park, J. H., Medina, S., Mauger, S. A., Ulsh, M., Pylypenko, S., Myers, D. J., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104943 · Cited by 92
Self-citationLiu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“However, for screen printing, slot-die coating, or gravure coating, the viscosity of the catalyst ink needs to be increased [38,39].”
BackgroundMethodInfluentialKhandavalli, S., Park, J. H., Kariuki, N. N., Zaccarine, S. F., Pylypenko, S., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b14415 · Cited by 74
Self-citationActivation mechanisms in the catalyst coated membrane of PEM fuel cells
Christmann, K., Friedrich, K. A., & Zamel, N. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100924 · Cited by 78
Electrocatalytic water splitting over perovskite oxide catalysts
Wang, Y., Wang, L., Zhang, K., Xu, J., Wu, Q., Xie, Z., An, W., Liang, X., & Zou, X. (2023) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(23)64452-3 · Cited by 77
Wang, M., Medina, S., Pfeilsticker, J. R., Pylypenko, S., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01871 · Cited by 74
Self-citationMulticomponent, multiphase interactions in fuel-cell inks
Berlinger, S. A., Garg, S., & Weber, A. Z. (2021) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2021.100744 · Cited by 62
Creel, E. B., Tjiptowidjojo, K., Alex Lee, J., Livingston, K. M., Randall Schunk, P., Bell, N. S., Serov, A., & Wood III, D. L. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2021.11.047 · Cited by 67
Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Fixation of nanoparticles on fabric: Applications in general health management
Jalali, E., Erasmus, E., Schutte‐Smith, M., & Visser, H. G. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.110577 · Cited by 60
Wang, G., Osmieri, L., Star, A. G., Pfeilsticker, J., & Neyerlin, K. C. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab7aa1 · Cited by 59
Self-citationWillert, A., Tabary, F. Z., Zubkova, T., Santangelo, P. E., Romagnoli, M., & Baumann, R. R. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.04.197 · Cited by 55
Advancements in printed components for proton exchange membrane fuel cells: A comprehensive review
da Costa, G. P., Garcia, D. M. E., Nguyen, T. H. V., Lacharmoise, P. D., & Simao, C. D. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.072 · Cited by 55
Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells
Bodner, M., García, H. R., Steenberg, T., Terkelsen, C., Alfaro, S. M., Avcioglu, G. S., Vassiliev, A., Primdahl, S., & Hjuler, H. A. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.11.091 · Cited by 54
Ma, M., Shen, L., Liu, J., Xu, B., Zhang, Y., Zhao, L., & Wang, Z. (2024) · Rare Metals · doi:10.1007/s12598-024-02698-6 · Cited by 53
Scaling electrocatalysts for reduction of CO2 or CO to multicarbon products
Moon, H. S., Jaffer, S. A., Miao, R. K., Sargent, E. H., & Sinton, D. A. (2026) · Nature Reviews Materials · doi:10.1038/s41578-025-00875-2 · Cited by 52
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
Yang, D., Guo, Y., Tang, H., Wang, Y., Yang, D., Ming, P., Zhang, C., Li, B., & Zhu, S. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.07.172 · Cited by 44
Wang, M., Medina, S., Ochoa-Lozano, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.186 · Cited by 42
Self-citationOn the state and stability of fuel cell catalyst inks
Bapat, S., Giehl, C., Kohsakowski, S., Peinecke, V., Schäffler, M., & Segets, D. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.08.030 · Cited by 38
Bapat, S., & Segets, D. (2020) · ACS Applied Nano Materials · doi:10.1021/acsanm.0c01467 · Cited by 37
Koch, S., Metzler, L., Kilian, S. K., Heizmann, P. A., Lombeck, F., Breitwieser, M., & Vierrath, S. (2022) · Advanced Sustainable Systems · doi:10.1002/adsu.202200332 · Cited by 35
Kabir, S., Cleve, T. V., Khandavalli, S., Medina, S., Pylypenko, S., Mauger, S. A., Ulsh, M., & Neyerlin, K. C. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c03073 · Cited by 34
Self-citationWang, M., Rome, G., Medina, S., Pfeilsticker, J. R., Kang, Z., Pylypenko, S., Ulsh, M., & Bender, G. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228344 · Cited by 31
Self-citationOsmieri, L., Mauger, S. A., Ulsh, M., Neyerlin, K. C., & Bender, G. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.227829 · Cited by 31
Self-citationBaez-Cotto, C. M., Pfeilsticker, J., Godoy, A. O., Batool, M., Zaccarine, S. F., Wang, M., Bird, O. F., Pylypenko, S., Janković, J., Ulsh, M., et al. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233567 · Cited by 25
Self-citationReview—Graded Catalyst Layers in Hydrogen Fuel Cells - A Pathway to Application-Tailored Cells
Ayoub, M., Böhm, T., Bierling, M., Thiele, S., & Brodt, M. W. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad73a7 · Cited by 25
Impacts of cathode catalyst layer defects on performance and durability in PEM fuel cells
Stoll, J., Zhao, N., Yuan, X., Girard, F., Kjeang, E., & Shi, Z. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233565 · Cited by 24
Wang, M., Peng, F., Zou, J., Zhao, W. G., Wu, M., Williams, M. C., Yu, G., & Wang, H. (2025) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.115707 · Cited by 23
Impacts of bubble defects in proton exchange membranes on fuel cell performance and durability
Stoll, J., Zhao, N., Yuan, X., Girard, F., Kjeang, E., & Shi, Z. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234072 · Cited by 23
Challenges of fabricating catalyst layers for PEM fuel cells using flatbed screen printing
Ney, L., Hog, J., Singh, R., Göttlicher, N., Schneider, P., Tepner, S., Klingele, M., Keding, R. J., Clement, F., & Groos, U. (2022) · Journal of Coatings Technology and Research · doi:10.1007/s11998-022-00710-1 · Cited by 21
Printable and Flexible Iridium Oxide-Based pH Sensor by a Roll-to-Roll Process
Chawang, K., Bing, S., & Chiao, J. ‐. (2023) · Chemosensors · doi:10.3390/chemosensors11050267 · Cited by 20
Ouimet, R. J., Ebaugh, T. A., Mirshekari, G., Bliznakov, S., Bonville, L. J., & Marić, R. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03670 · Cited by 19
Liu, G., Peng, S., Hou, F., Wang, X., & Fang, B. (2022) · Membranes · doi:10.3390/membranes13010024 · Cited by 18
Quarz, P., Zimmerer, N., Scharfer, P., & Schabel, W. (2024) · Fuel Cells · doi:10.1002/fuce.202300252 · Cited by 17
Jung, G., Chan, S.-H., Lai, C.-J., Yeh, C.-C., & Yu, J.-W. (2019) · Energies · doi:10.3390/en12214218 · Cited by 17
The interplay between impedance parameters, structure, and performance of fuel cell catalyst layers
Moghaddam, R. B., & Easton, E. B. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115792 · Cited by 17
Medina, S., Foster, J. G., Dzara, M. J., Wang, M., Ulsh, M., Mauger, S. A., & Pylypenko, S. (2022) · SSRN Electronic Journal · doi:10.2139/ssrn.4265709 · Cited by 17
Self-citationWang, H., Osmieri, L., Yu, H., Zachman, M. J., Park, J. H., Kariuki, N. N., Cetinbas, F. C., Khandavalli, S., Mauger, S. A., Myers, D. J., et al. (2022) · SusMat · doi:10.1002/sus2.106 · Cited by 16
Self-citationTuntanatewin, W., Tani, K., Ishikura, K., Zhang, H., & Okamura, Y. (2019) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2019.124274 · Cited by 16
Romagnoli, M., & Testa, V. (2023) · IntechOpen eBooks · doi:10.5772/intechopen.1002872 · Cited by 15
Huang, Y., Hsu, Y.-H., & Pan, Y.-T. F. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c03568 · Cited by 15
Electrode optimization for efficient hydrogen production using an SO2-depolarized electrolysis cell
Colón-Mercado, H., Mauger, S. A., Gorensek, M. B., Fujimoto, C. H., Lando, A. A., Ganesan, P., Meekins, B. H., & Meeks, N. D. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.02.166 · Cited by 14
Self-citationSantangelo, P. E., Romagnoli, M., & Puglia, M. (2022) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2022.110631 · Cited by 13
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Park, J., Ulsh, M., & Mauger, S. A. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.06.168 · Cited by 12
Self-citationLongitudinal strand ordering leads to shear thinning in Nafion
Michelarakis, N., Franz, F., Gkagkas, K., & Gräter, F. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp02024b · Cited by 11
Felix, C., & Barron, O. (2025) · Journal of the Southern African Institute of Mining and Metallurgy · doi:10.17159/2411-9717/818/2025 · Cited by 9
Xing, Y., Liu, L., Fu, Z., Li, Y., & Li, H. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c01800 · Cited by 9
Esfahani, R. A. M., Black‐Araujo, K., Melino, P. D., Sullivan, M. T., & Easton, E. B. (2022) · Results in Engineering · doi:10.1016/j.rineng.2022.100767 · Cited by 8
Seetharamiahsrinivasaraju, C., Shetty, R., Saxena, S., Sharma, P., Cohen, D. K., Springstead, J. R., & Oldenzijl, R. (2024) · Advanced Materials · doi:10.1002/adma.202413551 · Cited by 7
Li, G., Xu, T., Luo, S., Wang, Q., Li, X., Xing, D., Ming, P., Li, B., & Zhang, C. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235415 · Cited by 7
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Stoll, J., Jeong, J., Huynh, P., & Kjeang, E. (2024) · Journal of the Electrochemical Society · doi:10.1149/1945-7111/ad4c11 · Cited by 6
Acheampong, R., Stewart-Thomas, K., Islam, M. N., Dhawan, H., Eastcott, J. I., & Shahgaldi, S. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138741 · Cited by 6
Swain, R., & Ramarao, S. D. (2026) · ECS Advances · doi:10.1149/2754-2734/ae43da · Cited by 6
Jacobsen, D., Porter, J. M., Ulsh, M., & Rupnowski, P. (2022) · Applied Spectroscopy · doi:10.1177/00037028221080177 · Cited by 6
Self-citationGao, F., Hoffman, J. R., Xu, J., Ievlev, A. V., Whitmer, J. K., & Phillip, W. A. (2025) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2504069122 · Cited by 4
Hog, J., Goya, D. M., Wild, J., Ney, L., & Zamel, N. (2026) · Fuel Cells · doi:10.1002/fuce.70058 · Cited by 4
Force uniformity control for large-area roll-to-roll process
Nguyen, T. S., Lee, S.-H., Kim, G. E., Kwon, S., Kim, K.-R., Park, P., Kim, K.-Y., Kim, S., Choi, Y., & Kim, K. (2021) · Review of Scientific Instruments · doi:10.1063/5.0059365 · Cited by 4
Han, L., Gong, X. Q., Wang, Y., Wang, D., Ru, C., Wang, X., Guo, D., Liu, F., Sheng, X., & Ge, J. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111432 · Cited by 3
Kumar, N., Chen, Y., Bahrami, M., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.239967 · Cited by 3
Shelf-life of ball-milled catalyst inks for the fabrication of fuel cell electrodes
Baez-Cotto, C. M., Foster, J. G., Godoy, A. O., Cleve, T. V., Young, E., Pylypenko, S., Janković, J., Ulsh, M., & Mauger, S. A. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.10.273 · Cited by 2
Self-citationKumar, N., Chen, Y., Bahrami, M., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240005 · Cited by 2
Kumar, N., Bahrami, M., Chen, Y., Lowe, O. C., Orfino, F. P., Dutta, M., Lauritzen, M. V., Setzler, E., Agapov, A. L., & Kjeang, E. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240057 · Cited by 2
Novel Materials and Architecture for Cathode of Polymer Electrolyte Fuel Cells
Islam, M. N. (2020) · doi:10.11575/prism/38255 · Cited by 2
Mauger, S. A., Lee, S., Rice, R., Padgett, E., Zaccarine, S. F., Ahmadi, M. F., Batool, M., Reeves, K. S., Cullen, D. A., Pylypenko, S., et al. (2026) · Energy Advances · doi:10.1039/d5ya00309a · Cited by 1
Self-citationTemplate‐Based Structured Electrodes for High Power and Durable Proton Exchange Membrane Fuel Cells
Ren, Y., Liu, L., Hwang, D. K., & Lee, C. (2026) · SusMat · doi:10.1002/sus2.70081 · Cited by 1
Free Ionomer Controls Adsorption in Electrolyzer Inks
Degirmenci, M., Rajupet, S., Soestrino, D., Khandavalli, S., Park, J., Perales, L., Blair, S. J., Weber, A. Z., & Berlinger, S. A. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/aeb7d2 · Cited by 1
Managing Alkaline CO2 Electrolyzer Flooding using a Grooved Cathode Gas Diffusion Electrode
Farsi, A., Batta, V., Chan, J. K. D., Miao, R. K., Sarma, P. V., Sinton, D. A., & Bazylak, A. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.6c01086 · Cited by 1
Tang, J., Su, C., & Shao, Z. (2024) · Springer eBooks · doi:10.1007/978-981-97-5706-0_3 · Cited by 1
Mrad, C. (2023) · theses.fr (ABES) · doi:10.70675/7cc83a81ze1a6z45c8zb320zd529ffbdfc78 · Cited by 1
Model-informed strategies for mitigating platinum loss in polymer electrolyte membrane fuel cellsPreprint
Agravante, G., & Gostick, J. T. (2026) · ChemRxiv · doi:10.26434/chemrxiv.15001758/v1 · Cited by 1
Jacobsen, D. W. (2019) · Digital Collections of Colorado (Colorado State University)
Bapat, S., & Segets, D. (2020) · ChemRxiv · doi:10.26434/chemrxiv.12278360
DOE EERE AMO Electrochemistry for Manufacturing (Workshop Report)
Peretti, K., Lucci, F. R., Kidder, M. K., Deutsch, T. G., & Oshman, C. J. (2022) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · doi:10.2172/1871276
Methods for Roll-to-Roll Vapor Deposition of Organic Semiconductors
Qu, B. (2023) · Deep Blue (University of Michigan) · doi:10.7302/8429
The Role of Dispersion Solvent Composition in Pemfc Electrodes: Performance and Durability InsightsPreprint
Luo, S., Li, G., Zang, Z., Li, X., Wang, Q., Wang, Q., Xu, T., Xing, D., & Yi, B. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5081104
Synergy Analysis Methodology For Decreasing Fuel Cell Production Costs
Heimes, H. H., Kampker, A., Kehrer, M., Hagedorn, S., Hinrichs, N., & Pfeifer, T. (2023) · Institutional Repository of Leibniz Universität Hannover (Leibniz Universität Hannover) · doi:10.15488/13446
Scalable and Printable Three-Phase Ion Gel Electrocatalyst Device
Hopkins, J. A., Kim, C., Xiong, R., Lee, W., Canavan, J. R., Abdelrahman, O. A., Stoerzinger, K. A., Frisbie, C. D., & Dauenhauer, P. J. (2026) · ACS Applied Catalysis · doi:10.1021/acsappcat.6c00054
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Heckenbach, S., Kubina, A., Kohsakowski, S., Özcan, F., & Segets, D. (2026) · Engineering Archive (engrXiv) · doi:10.31224/7584
Marinoiu, A., D’Urso, C., Iordache, M., Ion‐Ebrasu, D., Iliescu, M., & Varlam, M. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.156751
Quarz, P. (2026) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000195965
Zhang, D. Y., Young, E., Cleve, T. V., Yu, H., Soetrisno, D. D., Reeves, K. S., Mauger, S. A., & Baez-Cotto, C. M. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.157024
Self-citationZirconium(IV)-promoted colloidal stability of carbon black particles and Pt/carbon catalysts
Brigl, D., Wolf, M., & Distaso, M. (2026) · Carbon Trends · doi:10.1016/j.cartre.2026.100700
Pore-Scale Modeling of Platinum Degradation in PEM Fuel Cells
Agravante, G. (2026) · UWSpace (University of Waterloo)
Metadata
- Authors
- Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M.
- Affiliations
- National Laboratory of the Rockies (US)
- Colorado School of Mines (US)
- Oak Ridge National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2018
- Volume
- 165
- Issue
- 11
- Pages
- F1012-F1018
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2890145237
- Cited by
- 81
- References
- 33
- Citations by year
- 2026: 13 · 2025: 8 · 2024: 12 · 2023: 7 · 2022: 14 · 2021: 12 · 2020: 9 · 2019: 6
- FWCI
- 2.58
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- Funders
- Department of Energy (DE-AC36-08GO28308)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- roll-to-roll processing, proton exchange membrane fuel cells, catalyst layer, platinum on carbon, ultrasonic spray coating, coating uniformity, film morphology, electrode performance, scale-up
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.