Battery Cycle Life Prediction with Coupled Chemical Degradation and Fatigue Mechanics
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
Coupled mechanical-chemical degradation of electrodes upon charging and discharging has been recognized as a major failure mechanism in lithium ion batteries. The instability of commonly employed electrolytes results in solid electrolyte interphase (SEI) formation. Although the SEI layer is necessary, as it passivates the electrode-electrolyte interface from further solvent decomposition, SEI formation consumes lithium and thus contributes to irreversible capacity loss. In this paper, we study irreversible capacity loss in a graphite-LiFePO 4 cell. Our results support the mechanism of irreversible capacity loss due to the consumption of lithium in forming SEI. We attribute irreversible capacity loss to diffusion induced stresses (DISs) that cause pre-existing cracks on the electrode surfaces to grow gradually upon cycling, leading to the growth of SEI on the newly exposed electrode surfaces. Because lithium is consumed in forming the new SEI, irreversible capacity loss continues with cycling. Along with the SEI formation upon newly exposed (cracked) surfaces, the existing SEI thickness also grows with cycling, resulting in additional loss of lithium. In this study, we provide, a simple mathematical model, based on the Paris’ Law formulation of mechanical fatigue, in combination with chemical degradation to explain battery life. We compare the predicted capacity at different temperatures with the experimental data obtained from electrochemical measurements on graphite-LiFePO 4 cells.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“which is why most physics-based models focus only on the most dominant mechanisms, such as the formation and growth of the solid electrolyte interphase (SEI) [11,12] or electronic contact loss through particle cracking [13,14].”
From Degradation diagnostics for lithium ion cells (2017) · cites this paper as [14]
Citations
Cites
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
A Critical Analysis of Crack Propagation Laws
Paris, P., & Erdogan, F. (1963) · Journal of Basic Engineering · doi:10.1115/1.3656900 · Cited by 7,122
Lawn, B. (1993) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623127 · Cited by 4,759
Suresh, S. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511806575 · Cited by 4,526
Battery materials for ultrafast charging and discharging
Kang, B., & Ceder, G. (2009) · Nature · doi:10.1038/nature07853 · Cited by 3,480
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<808::aid-adma808>3.0.co;2-r · Cited by 2,998
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
Electronically conductive phospho-olivines as lithium storage electrodes
Chung, S.-Y., Bloking, J. T., & Chiang, Y.-M. (2002) · Nature Materials · doi:10.1038/nmat732 · Cited by 2,939
Aurbach, D. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00431-6 · Cited by 2,130
Fracture Mechanics: Fundamentals and Applications, Third Edition
Anderson, T. L., & Anderson, T. L. (2005) · CRC Press eBooks · doi:10.1201/9781420058215 · Cited by 1,854
Research works printed but not linked: 1
- Ragab A. R. Bayoumi S. B. , Engineering Solid Mechanics- Fundamental and Applications. (CRC Press, Boca Ranton, FL, 1999).
Cited by
Items 201–300 of 389
Park, S. H., Lee, H., Park, J., Roh, Y., Byun, S., Lim, J., Jung, S.-W., Kim, N., Lee, K. T., & Lee, Y. M. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106420 · Cited by 22
Simulation and Analysis of Inhomogeneous Degradation in Large Format LiMn2O4/Carbon Cells
Dai, Y., Cai, L., & White, R. E. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.040408jes · Cited by 22
Liu, Z., Zhou, J., Chen, B., & Zhu, J.-W. (2015) · RSC Advances · doi:10.1039/c5ra13991k · Cited by 22
Sinusoidal current and stress evolutions in lithium-ion batteries
Yang, X., Bauer, C., & Wang, C. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.07.070 · Cited by 23
A Strain-Diffusion Coupled Electrochemical Model for Lithium-Ion Battery
Verma, M. K. S., Basu, S., Hariharan, K. S., Kolake, S. M., Song, T., & Jeon, J. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021714jes · Cited by 23
Bouibes, A., Sakaki, N., & Nagaoka, M. (2023) · ACS Omega · doi:10.1021/acsomega.2c06224 · Cited by 21
Attidekou, P. S., Wang, C., Armstrong, M., Lambert, S., & Christensen, P. A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0101709jes · Cited by 24
Hao, F., Fang, D., & Chen, X. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0341512jes · Cited by 21
Optimum Morphology of Mixed-Olivine Mesocrystals for a Li-Ion Battery
Park, K., Kim, J., Wi, S., Lee, S., Hwang, T., Kim, J., Kang, J., Choi, J., Nam, S., & Park, B. (2018) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.8b00501 · Cited by 21
Lithium-ion Battery SOH Estimation and Fault Diagnosis with Missing Data
Yang, A., Wang, Y., Tsui, K., & Zi, Y. (2019) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2019.8826888 · Cited by 21
Scaling Relations for Intercalation Induced Damage in Electrodes
Chen, C., Barai, P., Smith, K. A., & Mukherjee, P. P. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.03.106 · Cited by 20
Augustyn, V., Wang, R. J., Balke, N., Pharr, M., & Arnold, C. B. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c01823 · Cited by 24
Wang, Y., Li, J., Guo, S., Zhao, M. S., Cui, W., Li, L., Zhao, L., & Wang, Z. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233235 · Cited by 19
Lee, S.-C., Ko, H.-J., & Kim, J. (2025) · Micro and Nano Systems Letters · doi:10.1186/s40486-025-00222-8 · Cited by 24
“While batteries are used for miniaturization and portability, their limited lifespan, low capacity, and the inconvenience of replacement remain major challenges [19–21].”
Surface effected fracture behavior of nano-spherical electrodes during lithiation reaction
Hu, X., Zhao, Y., Cai, R., & Zhou, J. (2017) · Materials Science and Engineering A · doi:10.1016/j.msea.2017.09.033 · Cited by 19
Kim, D.-R., Kang, J.-W., Eom, T.-H., Kim, J.-M., Lee, J. E., & Won, C.-Y. (2018) · Applied Sciences · doi:10.3390/app8081251 · Cited by 19
Bagheri, A., Arghavani, J., Naghdabadi, R., & Brassart, L. (2020) · Mechanics of Materials · doi:10.1016/j.mechmat.2020.103663 · Cited by 19
Liang, H., Zhang, X., Yang, L., Wu, Y., Chen, H., Song, W., & Fang, D. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9485-6 · Cited by 19
An accelerated aging test procedure for lithium-ion battery based on a dual-temperature approach
Barcellona, S., Colnago, S., Codecasa, L., & Piegari, L. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237167 · Cited by 22
Song, S., Munk‐Nielsen, S., Knap, V., & Uhrenfeldt, C. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.103413 · Cited by 21
Pistorio, F., Clerici, D., & Somà, A. (2023) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2023.109597 · Cited by 18
Interfacial Fracture of Nanowire Electrodes of Lithium-Ion Batteries
Hardin, G. R., Zhang, Y., Fincher, C. D., & Pharr, M. (2017) · JOM · doi:10.1007/s11837-017-2411-x · Cited by 18
Chung, H., Kim, J. H., Bae, Y. S., & Moon, J. (2024) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-024-1031-y · Cited by 17
“An ordinary differential equation (ODE) based on Paris’ law was formulated to model this behavior, replacing the conventional cycle units with time units [19].”
The impact of thermal damage accumulation on thermal runaway behavior of lithium-ion batteries
Xiao, Y., Liu, M., Lu, H., Gao, Z., Wang, D., Yang, F., Wang, J., Kou, Z., Huang, Z., Zhang, S., et al. (2025) · Energy · doi:10.1016/j.energy.2025.138812 · Cited by 17
Self-citationLi, J.-F., Lin, C.-H., & Chen, K.-C. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0211816jes · Cited by 18
Baker, D. R., Verbrugge, M. W., & Bower, A. F. (2015) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-015-3012-7 · Cited by 17
Self-citationHong, L., Liang, L., Bhattacharyya, S., Xing, W., & Chen, L. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp00267f · Cited by 17
The Operation Dependence of C − N Fatigue for Lithium‐Ion Batteries
Chen, C., Zou, Q., Wen, J., Liu, J., Notten, P. H. L., & Wei, Y. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202300942 · Cited by 15
Liu, Y., Yang, B., Zhang, Y., Li, R., Chen, Z., & Zhou, X. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.109496 · Cited by 16
Zeng, K., Li, T., & Tian, T. (2017) · Journal of Physics D Applied Physics · doi:10.1088/1361-6463/aa7571 · Cited by 16
Verbrugge, M. W., Xiao, X., & Baker, D. R. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8ce7 · Cited by 14
Self-citationA thermo-chemo-mechanically coupled model for cathode particles in lithium–ion batteries
Nateghi, A., & Keip, M. (2021) · Acta Mechanica · doi:10.1007/s00707-021-02970-1 · Cited by 14
Roy, K., Bhunia, M. K., Karthik, P. E., Rana, A., Das, B., Banerjee, A., & Ogale, S. (2025) · Small · doi:10.1002/smll.202410167 · Cited by 16
Analysis of fracture behaviour in active materials for lithium ion batteries
Clerici, D., Mocera, F., & Pistorio, F. (2022) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1214/1/012018 · Cited by 14
Doubleday, K., Parker, A., Hafiz, F., Irwin, B., Hancock, S., Pless, S., & Hodge, B. S. (2019) · Journal of Renewable and Sustainable Energy · doi:10.1063/1.5093917 · Cited by 15
An insight into battery degradation for the proposal of a battery-friendly charging technique
Sah, B., & Kumar, P. (2023) · Energy Advances · doi:10.1039/d3ya00275f · Cited by 15
Stacked triboelectric nanogenerator with grating structures for harvesting vertical motion
Ko, H.-J., Seong, H., & Kim, J. (2024) · Nano Energy · doi:10.1016/j.nanoen.2024.110258 · Cited by 13
Simulation and understanding of degraded lithium-ion battery self-heating ignition
Gao, X., Li, K., Cao, Y., Offer, G. J., & Wang, H. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.125435 · Cited by 14
Investigation of the Applicability of Helium-Based Cooling System for Li-Ion Batteries
Alipour, M., Hassanpouryouzband, A., & Kizilel, R. (2021) · Electrochem · doi:10.3390/electrochem2010011 · Cited by 13
“As a result, the LiFePO 4 electrode forms a Fe +2 ion and catalyzes the side reactions on the anode, resulting in thicker SEI film [38–40].”
Gao, E., Lü, B., Zhao, Y., Feng, J., Song, Y., & Zhang, J. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac0bf4 · Cited by 14
Prognostics of Lithium ion battery using functional principal component analysis
Guo, J. H., & Li, Z. S. (2017) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm.2017.7998299 · Cited by 14
The effect of electrochemical cycling on the strength of LiCoO 2
Feng, L., Lu, X., Zhao, T., & Dillon, S. J. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.15893 · Cited by 13
Seong, M. J., & Yim, T. (2020) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2020.02.029 · Cited by 14
Morphology, Structure, and Thermal Stability Analysis of Aged Lithium-Ion Battery Materials
Wang, C., Zhu, Y., Gao, F., Wang, K.-K., Zhao, P., Meng, Q., & Wu, Q. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abc4ba · Cited by 13
Guo, M., Jin, X., & White, R. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0021711jes · Cited by 13
“Safari et al. 29 used the SP model to study capacity fade as did Deshpande et al. 30 who extended the SP model to include crack growth in a graphite particle followed by film formation in the resulting cracks with loss of lithium ions.”
MethodLi, D., Liu, H., Wan, H., Wang, Y., & Zhang, J. (2022) · Journal of Energy Storage · doi:10.1016/j.est.2022.106018 · Cited by 12
Mechanistic Elucidation of Si Particle Morphology on Electrode Performance
Verma, A., Franco, A. A., & Mukherjee, P. P. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0961915jes · Cited by 11
Verbrugge, M. W., Qi, Y., Baker, D. R., & Cheng, Y. (2015) · Advances in electrochemical science and engineering · doi:10.1002/9783527690633.ch6 · Cited by 11
Self-citationYu, H., Dezza, F. C., & Cheli, F. (2018) · arXiv (Cornell University) · Cited by 11
Petursdóttir, E., Kohlhuber, M., & Ehrenberg, H. (2024) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad5d1c · Cited by 11
Feng, Y., Xue, C., Han, F., Cao, Z., & Yang, R. J. (2024) · Batteries · doi:10.3390/batteries10080290 · Cited by 13
Liu, Y., Zhou, B., Pang, T., Fan, G., & Zhang, X. (2025) · eTransportation · doi:10.1016/j.etran.2025.100446 · Cited by 17
Lee, D., Koo, B., Shin, C. B., Lee, S., Song, J., Jang, I., & Woo, J. (2019) · Energies · doi:10.3390/en12224386 · Cited by 11
Hodson, T., Patil, S., & Steingart, D. A. (2021) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac0f86 · Cited by 12
Kumbhar, P. Y., Swaminathan, N., & Annabattula, R. K. (2022) · International Journal of Energy Research · doi:10.1002/er.7967 · Cited by 11
“As there is a huge difference in the order of the material parameters, Equations (11) and (12) are solved in their non-dimensionalised form (Please see Appendix A).”
BackgroundLiu, Z., Cai, R., Chen, B., Liu, T., & Zhou, J. (2016) · Ionics · doi:10.1007/s11581-016-1848-1 · Cited by 11
“[21] predicted the battery cycle life thought chemical degradation and fatigue mechanics.”
BackgroundPrinted Carbon Black Thermocouple as an In Situ Thermal Sensor for Lithium-Ion Cell
Talplacido, N. C., & Cumming, D. J. (2024) · Batteries · doi:10.3390/batteries10030078 · Cited by 10
Multiscale Mechanical Failures in Lithium-Ion Batteries: Experimental and Theoretical Approaches
Chen, C., Wu, Y., Fan, J., Wang, Z., Sun, L., & Chen, H. (2025) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-025-00584-x · Cited by 10
Lifetime extension of aged Li-ion prismatic batteries via mechanical constraints
Ihuaenyi, R. C., Fang, R., Ashok, A. S., Condon, A., Jiao, J., Attia, P. M., Li, W., & Zhu, J. (2025) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2025.102685 · Cited by 10
Multiscale Imaging Techniques for Real‐Time, Noninvasive Diagnosis of Li‐Ion Battery Failures
Lee, M., Lee, J., Shin, Y., & Lee, H. (2023) · Small Science · doi:10.1002/smsc.202300063 · Cited by 12
Hamidi, S., Javanbakht, M., Mousazadeh, M. H., & Tafreshi, S. S. (2023) · Ionics · doi:10.1007/s11581-023-05296-1 · Cited by 10
“Three distinct mechanisms have been suggested to elucidate the consumption of lithium due to SEI instability on the graphite surface: (I) electron leakage through the SEI layer, (II) dissolution of SEI species, and (III) mechanical cracking of the SEI film [18, 19].”
Testing protocols for battery characterization
Gallo, D., Landi, C., Luiso, M., Rosano, A., Landi, M., & Paciello, V. (2014) · IEEE International Instrumentation and Measurement Technology Conference · doi:10.1109/i2mtc.2014.6860771 · Cited by 10
Monitoring the length change of Ni@C composite electrodes during charging/discharging processes
An, C., Dong, C., Shao, L., & Deng, Q. (2019) · Electrochemistry Communications · doi:10.1016/j.elecom.2019.05.012 · Cited by 10
Particle- and crack-size dependency of lithium-ion battery materials LiFePO4
Stamps, M. A., Eischen, J. W., & Huang, H. S. (2016) · AIMS Materials Science · doi:10.3934/matersci.2016.1.190 · Cited by 10
“In their study, an isotropic core-shell model incorporating chemical and mechanical degradation was implemented, considering a surface crack that grows with each charge-discharge cycle [64].”
MethodEl‐Bayeh, C. Z., Mougharbel, I., Saad, M., Chandra, A., Lefebvre, S., Asber, D., & Lenoir, L. (2016) · International Conference on Renewable Energies for Developing Countries (REDEC) · doi:10.1109/redec.2016.7577540 · Cited by 12
“The predicted SOC defined in (3) takes into account many factors which are defined in table I: , = ∙ − ∙− ∑ , , , , (3) = [ ; ] ∙ , ∙ + , Where 0 ≤ ≤ 1 ; ≥ 1 (4) = Where ≤ 0 and ≥ 0 (5) , = [ ; ] ∙ , ∙ + , For = 1, 4,5,6,10 and , ≥ 0 (6) Symbol Meaning Originality initial SOC of the PEV before the trip (V) Exist [53]…”
A phenomenological ageing study of lithium-ion batteries under dynamic loads
Horstkötter, I., Gesner, P., Hadler, K., & Bäker, B. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102962 · Cited by 10
A Combined Multiple Factor Degradation Model and Online Verification for Electric Vehicle Batteries
Chen, Y., He, Y., Zhong, L., & Chen, L. (2019) · Energies · doi:10.3390/en12224376 · Cited by 11
Impedance studies of LiMn0.8Fe0.2PO4/C cathodes for lithium-ion batteries
Zhang, L., Zhang, X., Wang, L., Zhuang, Q., Ju, Z., & Cui, Y. (2021) · Ionics · doi:10.1007/s11581-021-04248-x · Cited by 9
“Since Goodenough and coworkers reported that olivine-type phosphates compounds such as LiAPO4 (A = Fe, Mn, Ni, and Co) were used as cathode materials for lithium-ion batteries in 1997 [1], they have been intensively investigated due to their excellent cycle life, high capacity, environmental benignity, thermal stabili…”
MethodYang, Y., Raymand, D., Guo, W., & Brandell, D. (2026) · Journal of Power Sources Advances · doi:10.1016/j.powera.2026.100203 · Cited by 9
Appiah, W. A., Roh, Y., Dzakpasu, C. B., Ryou, M., & Lee, Y. M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab9382 · Cited by 8
Electrochemical Preparation of Lithium-Rich Graphite Anode for LiFePO4 Battery
Song, Y., Song, J., Zhang, L.-L., Dai, B.-L., & Wei, C. (2020) · High Energy Chemistry · doi:10.1134/s0018143920060144 · Cited by 4
Chen, B., Chu, S., Cai, R., & Zhou, J. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0471613jes · Cited by 8
Li, J.-F., Lin, Y., Lin, C.-H., & Chen, K.-C. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1801712jes · Cited by 7
Pressure Monitoring Cell for Constrained Battery Electrodes
Singer, J., Sämann, C., Gössl, T., & Birke, K. P. (2018) · Sensors · doi:10.3390/s18113808 · Cited by 8
“Further, we monitor the cell pressure during cycling of the cell and are able to measure the increasing cell pressure as a consequence of increasing volume change due to interface formation and aging processes [12,16].”
Enhanced Lithium-Ion Battery SOH Estimation Using Bayesian-Optimized CNN Deep Learning Approach
Huang, X., Wei, J., Huang, J., Zhang, Q., Zhong, R., & Lai, R. (2024) · International Journal of Pattern Recognition and Artificial Intelligence · doi:10.1142/s0218001424520207 · Cited by 7
POLIDEMO: An electrochemical-mechanical framework for modeling lithium-ion batteries degradation
Pistorio, F., Clerici, D., & Somà, A. (2025) · Applied Energy · doi:10.1016/j.apenergy.2025.126744 · Cited by 7
Qi, Z., Shan, Z., Ma, W., Li, L., Wang, S., Li, C., & Wang, Z. (2020) · Applied Sciences · doi:10.3390/app10020468 · Cited by 7
Predictive Models of Li-ion Battery Lifetime
Smith, K. A., Wood, E. W., Santhanagopalan, S., Kim, G., Shi, Y., & Pesaran, A. A. (2015) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 7
Hulikal, S., Chen, C., Chason, E., & Bower, A. F. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0701613jes · Cited by 7
Lithium Diffusion and Stress in a Polycrystalline Film Electrode
Zhao, Y., Lü, B., & Zhang, J. (2018) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-018-0018-6 · Cited by 7
Lithium-ion Battery Aging Prediction with Electrochemical Models: P2D vs SPMe
Lopetegi, I., Plett, G. L., Trimboli, M. S., Yeregui, J., Oca, L., Rojas, C., Miguel, E., & Iraola, U. (2023) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc60535.2023.10403316 · Cited by 6
“[20].”
Samad, H., Malik, M. S. S., & Gulzar, M. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.108050 · Cited by 6
Zhang, J., Yin, X., Wang, W., Tham, N. N., Xing, Z., Zhang, S. L., Wang, X., & Liu, Z. (2023) · Chemical Communications · doi:10.1039/d3cc02246c · Cited by 6
Roque, E., Segurado, J., & Montero‐Chacón, F. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ad07ab · Cited by 7
Ly, S., Sadeghi, M. A., Misaghian, N., Fathiannasab, H., & Gostick, J. T. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.122803 · Cited by 6
Synthetic dataset of LG M50 batteries with different degradation pathways
Zhang, H., Altaf, F., & Wik, T. (2024) · Data in Brief · doi:10.1016/j.dib.2024.111076 · Cited by 7
Weakly Supervised Battery SOH Estimation With Imprecise Intervals
Wang, T., Ren, C., Dong, Z. Y., & Feng, L. (2025) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2025.3535522 · Cited by 10
“Taking into account the battery degradation with an accelerated trend, the initial and finite capacity loss results from SEI growth [29], [34], and cell-to-cell heterogeneity [35], the improved Verhulst dynamic model, i.e., empirical model of battery ageing, can be depicted in (6). where μ is the…”
Yang, X., Lin, Y., Tang, S., Zhou, Y., Huang, X., Song, W. L., Yang, W. J., & Yang, Y. (2025) · Energy storage materials · doi:10.1016/j.ensm.2025.104473 · Cited by 5
Mechanistic modeling of SEI-induced capacity fade in cell under external loads
Geng, S., Zhang, Y., Zhang, K., & Zheng, B. (2025) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2025.106308 · Cited by 5
Ai, W., & Liu, Y. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2024.111386 · Cited by 8
Factors affecting electrolytic level maintenance in acid batteries
Mamatkulov, A. K., & Ильясович, Э. Ф. (2023) · E3S Web of Conferences · doi:10.1051/e3sconf/202340103067 · Cited by 5
“The use of the principle of immobilization of the electrolyte requires a high degree of accuracy of the ratio of the pores of the battery block elements: the ratio of the pores must ensure the pores of the positive electrodes operating in liquid conditions, and the pores of the negative electrodes operating in the for…”
BackgroundSugumaran, N., & Everill, P. (2023) · Journal of Energy Storage · doi:10.1016/j.est.2023.110048 · Cited by 5
Analytical computation of stress intensity factor for multi-physics problems
Pistorio, F., & Clerici, D. (2024) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/1306/1/012009 · Cited by 5
Zhao, D., Chu, L., Hou, Z., Zhou, Q., Liu, Y., Huang, Y., Chen, Z., Zhao, D., & Zhang, Y. (2024) · Energy · doi:10.1016/j.energy.2024.133031 · Cited by 5
A fatigue perspective on damage accumulating in lithium-ion batteries under dynamic cycling
Liu, J., Chang, Z., Chen, C., Wen, J., Chen, X., Duan, C., & Wei, Y. (2024) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2024.108773 · Cited by 6
Kim, S. H., Heo, S., Mun, J., Kim, G., Baek, W. J., Kim, Y. S., Han, S. S., & Jung, H. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.1411709jes · Cited by 5
Communication—Precursors to Abrupt Capacity Loss in Li-Ion Batteries
Agarwal, S., Swernath, S., Hariharan, K. S., Han, S., Kaushik, A., Patil, R. S., Kolake, S. M., & Oh, B. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abbfdd · Cited by 5
Study on Prediction Model of Performance and Degradation of LFP/Graphite Lithium-ion Battery
Hashimoto, T., Munakata, H., & Kanamura, K. (2021) · Electrochemistry · doi:10.5796/electrochemistry.20-00140 · Cited by 5
Study of processes that cause degradation of lithium-ion batteries
Popov, N. S., Anibroev, V. I., & Mosin, M. (2021) · International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE) · doi:10.1109/reepe51337.2021.9388037 · Cited by 5
“Ignoring the manufacturer's recommendations and operating safety rules will lead to faster deterioration of the battery [9].”
BackgroundXiao, J., Jiang, C., Terzi, S., Zheng, C., & Macchi, M. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.147120 · Cited by 6
Metadata
- Authors
- Deshpande, R., Verbrugge, M., Cheng, Y.-T., Wang, J., & Liu, P.
- Affiliations
- University of Kentucky (US)
- General Motors (United States) (US)
- HRL Laboratories (United States) (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2012
- Volume
- 159
- Issue
- 10
- Pages
- A1730-A1738
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2021615999
- Cited by
- 389
- References
- 49
- Citations by year
- 2026: 33 · 2025: 30 · 2024: 33 · 2023: 31 · 2022: 27 · 2021: 29 · 2020: 31 · 2019: 25 · 2018: 25 · 2017: 30 · 2016: 28 · 2015: 29 · 2014: 21 · 2013: 17
- FWCI
- 38.54
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of The Electrochemical Society (publishedVersion)
- Funders
- National Science Foundation
- Topics
- Physical Sciences › Engineering › Automotive Engineering › Battery Modeling and Management
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advancements in Battery Materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Battery Materials and Technologies
- Keywords
- lithium-ion batteries, irreversible capacity, solid electrolyte interphase, lithium consumption, diffusion-induced stress, electrode cracking, Paris law, temperature effects, electrode-electrolyte interface
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.