The DOI matches its Crossref record.
Stability Analysis of Electrodeposition across a Structured Electrolyte with Immobilized Anions
Abstract
Instabilities in electrodeposition that lead to formation of dendrites on metal surfaces place a significant limitation on important technologies such as batteries and microcircuits. In this paper, we show that a structured electrolyte with immobilized anions can improve the stability of electrodeposition as well as enhance the conductivity of the electrolyte at large overpotentials. A linear stability analysis of electrodeposition incorporating the effect of surface tension shows that the electrode surface is more stable at higher fractions of immobilized anions. Immobilizing even a small fraction (10%) of anions significantly improves stability compared to conventional liquid electrolytes. The analysis shows that the structured electrolyte stabilizes a wider range of perturbations than surface tension alone and reduces the growth rate of the most unstable perturbation. The stabilizing effects arise primarily at overpotentials large enough so that the metallic electrode is nearly depleted of ions in a liquid electrolyte. Under these conditions, the structured electrolyte maintains immobilized anions and mobile cations providing a stable current density at the metal electrode.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
Cheng, X.-B., Zhang, R., Zhao, C.-Z., & Zhang, Q. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00115 · Cited by 6,197
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Tikekar, M. D., Choudhury, S., Tu, Z., & Archer, L. A. (2016) · Nature Energy · doi:10.1038/nenergy.2016.114 · Cited by 1,765
Self-citationStable lithium electrodeposition in liquid and nanoporous solid electrolytes
Lu, Y., Tu, Z., & Archer, L. A. (2014) · Nature Materials · doi:10.1038/nmat4041 · Cited by 1,592
Self-citationRecent Progress of the Solid‐State Electrolytes for High‐Energy Metal‐Based Batteries
Fan, L., Wei, S., Li, S., Li, Q., & Lu, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702657 · Cited by 1,179
Cheng, X., Hou, T., Zhang, R., Peng, H., Zhao, C., Huang, J., & Zhang, Q. (2016) · Advanced Materials · doi:10.1002/adma.201506124 · Cited by 994
An anion-immobilized composite electrolyte for dendrite-free lithium metal anodes
Zhao, C.-Z., Zhang, X.-Q., Cheng, X.-B., Zhang, R., Xu, R., Chen, P.-Y., Peng, H.-J., Huang, J.-Q., & Zhang, Q. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1708489114 · Cited by 849
Liu, W., Liu, P., & Mitlin, D. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202002297 · Cited by 687
Towards better Li metal anodes: Challenges and strategies
Zhang, Y., Zuo, T.-T., Popovic, J., Lim, K., Yin, Y.-X., Maier, J., & Guo, Y.-G. (2020) · Materials Today · doi:10.1016/j.mattod.2019.09.018 · Cited by 653
A stable room-temperature sodium–sulfur battery
Wei, S., Xu, S., Agrawral, A., Choudhury, S., Lu, Y., Tu, Z., Ma, L., & Archer, L. A. (2016) · Nature Communications · doi:10.1038/ncomms11722 · Cited by 589
Self-citationZheng, J., Kim, M. S., Tu, Z., Choudhury, S., Tang, T., & Archer, L. A. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00883g · Cited by 466
Self-citationStabilizing Lithium Metal Anodes by Uniform Li-Ion Flux Distribution in Nanochannel Confinement
Liu, W., Lin, D., Pei, A., & Cui, Y. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b08730 · Cited by 455
A highly reversible room-temperature lithium metal battery based on crosslinked hairy nanoparticles
Choudhury, S., Mangal, R., Agrawal, A., & Archer, L. A. (2015) · Nature Communications · doi:10.1038/ncomms10101 · Cited by 450
Self-citationChen, L., Li, W., Fan, L., Nan, C., & Zhang, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901047 · Cited by 421
Zhang, X., Li, J., Liu, D., Liu, M., Zhou, T., Qi, K., Shi, L., Zhu, Y., & Qian, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03898a · Cited by 400
Zhu, J., Zhang, Z., Zhao, S., Westover, A. S., Belharouak, I., & Cao, P. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202003836 · Cited by 399
Ren, W., Ding, C., Fu, X., & Huang, Y. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.018 · Cited by 385
Stable Cycling of Lithium Metal Batteries Using High Transference Number Electrolytes
Lu, Y., Tikekar, M., Mohanty, R., Hendrickson, K., Ma, L., & Archer, L. A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402073 · Cited by 377
Self-citationZou, P., Sui, Y., Zhan, H., Wang, C., Xin, H. L., Cheng, H.-M., Kang, F., & Yang, C. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01100 · Cited by 368
Critical effects of electrolyte recipes for Li and Na metal batteries
Zheng, X., Huang, L., Ye, X., Zhang, J., Min, F., Luo, W., & Huang, Y. (2021) · Chem · doi:10.1016/j.chempr.2021.02.025 · Cited by 367
Strategies towards the challenges of zinc metal anode in rechargeable aqueous zinc ion batteries
Wang, J., Yang, Y., Zhang, Y., Li, Y., Sun, R., Wang, Z., & Wang, H. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.10.027 · Cited by 359
Wang, Y., Zhang, B., Lai, W., Xu, Y., Chou, S., Liu, H., & Dou, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602829 · Cited by 349
Mobile Ions in Composite Solids
Zou, Z., Li, Y., Lu, Z., Wang, D., Cui, Y., Guo, B., Li, Y., Liang, X., Feng, J., Li, H., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00760 · Cited by 348
Sheng, O., Jin, C., Luo, J., Yuan, H., Huang, H., Gan, Y., Zhang, J., Xia, Y., Liang, C., Zhang, W., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b00659 · Cited by 343
An In Vivo Formed Solid Electrolyte Surface Layer Enables Stable Plating of Li Metal
Pang, Q., Liang, X., Shyamsunder, A., & Nazar, L. F. (2017) · Joule · doi:10.1016/j.joule.2017.11.009 · Cited by 315
A “cation-anion regulation” synergistic anode host for dendrite-free lithium metal batteries
Zhang, W., Zhuang, H. L., Fan, L., Gao, L., & Lu, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar4410 · Cited by 299
Wan, J., Xie, J., Mackanic, D. G., Burke, W., Bao, Z., & Cui, Y. (2018) · Materials Today Nano · doi:10.1016/j.mtnano.2018.12.003 · Cited by 281
Engineering of lithium-metal anodes towards a safe and stable battery
Wang, L., Zhou, Z., Yan, X., Hou, F., Wen, L., Luo, W., Liang, J., & Dou, S. X. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.014 · Cited by 270
Highly Stable Sodium Batteries Enabled by Functional Ionic Polymer Membranes
Wei, S., Choudhury, S., Xu, J., Nath, P., Tu, Z., & Archer, L. A. (2017) · Advanced Materials · doi:10.1002/adma.201605512 · Cited by 267
Self-citationInteractions between Lithium Growths and Nanoporous Ceramic Separators
Bai, P., Guo, J., Wang, M., Kushima, A., Su, L., Li, J., Brushett, F. R., & Bazant, M. Z. (2018) · Joule · doi:10.1016/j.joule.2018.08.018 · Cited by 256
Metadata
- Authors
- Tikekar, M. D., Archer, L. A., & Koch, D. L.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2014
- Volume
- 161
- Issue
- 6
- Pages
- A847-A855
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W1967394731
- Cited by
- 226
- References
- 0
- FWCI
- 7.25
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.