Temperature-Adaptive Alternating Current Preheating of Lithium-Ion Batteries with Lithium Deposition Prevention
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Alternating current (AC) is capable of heating up a lithium-ion battery efficiently before charging at low temperature. Generally, the lower the frequency of the AC current, the higher the heat generation rate. Yet at low frequency, there is a risk of lithium-ion deposition during the half cycle of charging. This study develops a temperature-adaptive, deposition-free AC preheating method. The electrochemical impedance spectroscopies (EIS) of both positive and negative electrodes are measured at different temperatures using a three-electrode lithium-ion cell. The equivalent electric circuit (EEC) models are fitted through the EIS data. The maximum permissible amplitudes of the heating current without incurring lithium deposition at different frequencies are determined at each temperature using the fitted EEC model and the lithium deposition potential. Combining the maximum permissible AC current and the heat generation rate model in the frequency domain, a multistep AC preheating method, in which the amplitude is adjusted according to the cell temperature, is developed. Using this method, the cell can be heated from −20°C to 5°C within 800 s at 100 Hz frequency with the multistep temperature-adaptive amplitude profile.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328
Andre, D., Meiler, M., Steiner, K., Wimmer, C., Soczka-Guth, T., & Sauer, D. U. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.102 · Cited by 703
Arora, P., Doyle, M., & White, R. E. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392512 · Cited by 586
Petzl, M., & Danzer, M. A. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.12.060 · Cited by 511
Karimi, G., & Li, X. (2013) · International Journal of Energy Research · doi:10.1002/er.1956 · Cited by 411
Cited by
A review on the key issues of the lithium ion battery degradation among the whole life cycle
Han, X., Lu, L., Zheng, Y., Feng, X., Li, Z., Li, J., & Ouyang, M. (2019) · eTransportation · doi:10.1016/j.etran.2019.100005 · Cited by 1,745
Self-citationLithium-ion battery fast charging: A review
Tomaszewska, A., Chu, Z., Feng, X., O'Kane, S., Liu, X., Chen, J., Ji, C., Endler, E., Li, R., Liu, L., et al. (2019) · eTransportation · doi:10.1016/j.etran.2019.100011 · Cited by 1,592
Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review
Meddings, N., Heinrich, M., Overney, F., Lee, J.-S., Ruiz, V., Napolitano, E., Seitz, S., Hinds, G., Raccichini, R., Gaberšček, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228742 · Cited by 885
Lithium Plating Mechanism, Detection, and Mitigation in Lithium-Ion Batteries
Lin, X., Khosravinia, K., Hu, X., Li, J., & Lu, W. (2021) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100953 · Cited by 490
Understanding undesirable anode lithium plating issues in lithium-ion batteries
Liu, Q., Du, C., Shen, B., Zuo, P., Cheng, X., Ma, Y., Yin, G., & Gao, Y. (2016) · RSC Advances · doi:10.1039/c6ra19482f · Cited by 473
Hu, X., Zheng, Y., Howey, D. A., Perez, H., Foley, A., & Pecht, M. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100806 · Cited by 443
Panchal, S., Khasow, R., Dincer, I., Agelin-Chaab, M., Fraser, R., & Fowler, M. (2017) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2017.05.010 · Cited by 397
Challenges and development of lithium-ion batteries for low temperature environments
Piao, N., Gao, X., Yang, H., Guo, Z., Hu, G., Cheng, H.-M., & Li, F. (2022) · eTransportation · doi:10.1016/j.etran.2021.100145 · Cited by 324
Wang, Y., Zhang, X., & Chen, Z. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.118832 · Cited by 283
Advances in thermal management systems for next-generation power batteries
Yue, Q. L., He, C. X., Wu, M. C., & Zhao, T. S. (2021) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2021.121853 · Cited by 273
Wang, N., Li, C., Li, W., Chen, X., Li, Y., & Qi, D. (2021) · Journal of Energy Storage · doi:10.1016/j.est.2021.102771 · Cited by 183
Metadata
- Authors
- Ge, H., Huang, J., Zhang, J., & Li, Z.
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2015-12-01
- Volume
- 163
- Issue
- 2
- Pages
- A290-A299
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2539880537
- Cited by
- 150
- References
- 5
- FWCI
- 6.83
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.