Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
The aggregate size in fuel cell catalyst inks depends on the type of dispersion medium, particle concentration, and addition of stabilizing agents. In this work, ink stability and particle size of carbon black and carbon black/Nafion dispersions in four non-aqueous media, viz., methanol, ethanol, isopropanol and ethyl acetate are studied. Based on visual inspection, isopropanol is found to be the best medium for dispersion of carbon black inks. To rationalize this observation, a semi-empirical model based on diffusion-limited aggregation was developed to evaluate the rate of particle aggregation and predict the ink stability time for each dispersion medium. The proposed model supports the experimental observation by qualitatively predicting the same relationship between carbon stability and the dispersion media. The model also showed that the dielectric constant of the dispersion medium and the particle zeta potential are primarily responsible for the ink stability. Particle size for the different inks was determined by dynamic light scattering with and without dilution. Experimental results show that Nafion is a strong stabilizing agent, increasing the ink stability and decreasing the particle size of carbon aggregates. The beneficial effects of Nafion are independent of its concentration and are observed even at Nafion volume fractions of 10 wt%. The interaction energy is found to be a strong function of the surface potential for the dispersion medium with a higher dielectric constant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“al. found that the decrease in the primary and secondary agglomerates size resulting from dilution approaches 20%, through studying the ink with and without dilution by using a recent DLS apparatus [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“As the catalyst agglomerates are commonly covered by ionomer in the catalyst ink, solvent affects the dispersion or dispersion stability of catalyst likely through impacting the ionomer coverage on catalyst or the conformation of the adsorbed ionomer [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“When the I/C ratio reaches a certain value, increasing the content of ionomer in the catalyst ink further will not contribute to the size of agglomerates or increase the colloidal stability [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“As shown in Fig. 15a-c, the state of the catalyst ink remarkably changes within 24 h of storage [189].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [189]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“If the agglomerate size reaches a certain point, sedimentation would take place due to gravity, making the catalyst ink inhomogeneous [34,52].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Particle Deposition and Aggregation: Measurement, Modelling and Simulation
Elimelech, M. (1995) · Cited by 1,190
Electrokinetic and Colloid Transport Phenomena
Masliyah, J. H., & Bhattacharjee, S. (2006) · Wiley eBooks · doi:10.1002/0471799742 · Cited by 1,129
Self-citationFuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
The Impact of Platinum Loading on Oxygen Transport Resistance
Greszler, T. A., Caulk, D., & Sinha, P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.061212jes · Cited by 421
Anderson, W., Kozak, D., Coleman, V. A., Jämting, Å. K., & Trau, M. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.02.030 · Cited by 373
Unexplained transport resistances for low-loaded fuel-cell catalyst layers
Weber, A. Z., & Kusoglu, A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02952f · Cited by 333
Self-citationNew Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Wee, J.-H., Lee, K.-Y., & Kim, S. H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.051 · Cited by 261 · cited 1×
“UvdW = − A 6 · ( ai a j ai + a j ) · 1 r − (ai + a j ) [2]”
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Research works printed but not linked: 1
- Israelachvili J. , Intermolecular and surface forces: revised third edition. Academic press, 2011.
Cited by
Items 101–152 of 152
Suzuki, T., NAGAI, T., & Tsushima, S. (2020) · Journal of Thermal Science and Technology · doi:10.1299/jtst.2021jtst0012 · Cited by 7
Su, Y., Yuan, S., Li, J., Feng, Y., Shen, S., Yan, X., & Zhang, J. (2026) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2025.116163 · Cited by 6
Zhang, P., Yang, D., Li, B., Ming, P., Yang, D., & Zhang, C. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.069 · Cited by 6
Effects of Aemion and Aemion+ binders in oxygen evolution reaction catalyst layers
Mardle, P., Chen, B., Liu, H., Xie, Z., Qu, W., & Holdcroft, S. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.146273 · Cited by 6
Braig, M., Cho, H., Marchfelder, C., Atanasov, V. M., & Zeis, R. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151219 · Cited by 6
“While dilution of the sample could potentially improve data quality, it also affects particle size [29].”
Li, B., Ding, Z., Guo, Y., Wang, Y., Tang, H., Yang, D., Ming, P., & Zhang, C. (2021) · Physics of Fluids · doi:10.1063/5.0061704 · Cited by 6
Vu, T. H. T., Nguyen, M. D., & Ngoc, A. T. (2021) · Journal of Chemistry · doi:10.1155/2021/6649089 · Cited by 6
Ohtake, T., Ito, H., & Toyoda, N. (2022) · Polymer Journal · doi:10.1038/s41428-022-00673-5 · Cited by 6
Effects of Catalyst Ink Storage on Polymer Electrolyte Fuel Cells
Kircher, M., Roschger, M., Koo, W. Y., Blaschke, F., Grandi, M., Bodner, M., & Hacker, V. (2023) · Energies · doi:10.3390/en16197011 · Cited by 6
Merz, S., Wang, J., Galvosas, P., & Granwehr, J. (2021) · Molecules · doi:10.3390/molecules26216690 · Cited by 5
Cecchetti, M., Ebaugh, T. A., Bonville, L. J., Marić, R., Casalegno, A., & Zago, M. (2024) · Energy Technology · doi:10.1002/ente.202400410 · Cited by 5
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2022) · Membranes · doi:10.3390/membranes12050541 · Cited by 5
“The microscale mass transport in the CLs depends on the aggregate structure and ionomer distribution [55].”
BackgroundNanostructure of a Catalyst Ink Investigated by Contrast-Variation Small-Angle Neutron Scattering
Yoshimune, W., & Harada, M. (2020) · ECS Transactions · doi:10.1149/09809.0447ecst · Cited by 5
Liu, P., Yang, D., Li, B., Zhang, L., Xiao, L., & Chen, H. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151672 · Cited by 4
Chaurasia, S. B., Aravamuthan, S. R., Luo, D., Aküzüm, B., Wei, J., & Ağar, E. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/adee4f · Cited by 4
Hwang, M., Kim, D. Y., Ahn, K. H., Lee, S. S., & Jung, S. Y. (2025) · Physics of Fluids · doi:10.1063/5.0277046 · Cited by 4
Quarz, P., Zimmerer, N., Janning, L., Steck, A., Scharfer, P., & Schabel, W. (2025) · Energy Technology · doi:10.1002/ente.202501844 · Cited by 4
Oh, M. J., Shin, G. J., Lee, S., Kim, J.-W., Yang, S., & Lee, J. H. (2024) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2024.113810 · Cited by 3
Yoshino, S., Harada, M., Hasegawa, N., Yomo, S., Koiwai, A., Minami, S., Yamakawa, S., & Jinnouchi, R. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c17388 · Cited by 3
Su, Y., Yan, C., Zhao, C., Wang, E., Yin, J., Shen, S., Yan, X., & Zhang, J. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.173503 · Cited by 3
John, S. S., Ravindren, S., Nan, Z., Gunasekera, K., Boolchand, P., & Angelopoulos, A. P. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.04.015 · Cited by 3
Wei, J., Wang, Y., Ke, C., Liu, Y., Yang, S., Pan, M., & Li, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.134 · Cited by 3
Han, L., Gong, X. Q., Wang, Y., Wang, D., Ru, C., Wang, X., Guo, D., Liu, F., Sheng, X., & Ge, J. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111432 · Cited by 3
3D Imaging of Roadside and Underground Railway Particulate Matter Structures
Wertheim, D. F., Miyashita, L., Foley, G., Gill, I., Giddens, R., Gillmore, G. K., Dobson, R., Semple, S. E., Rule, A. M., & Grigg, J. (2023) · Environmental Science & Technology Letters · doi:10.1021/acs.estlett.2c00649 · Cited by 3
Yomo, S., Yoshino, S., Hasegawa, N., Harada, M., & Yamakawa, S. (2025) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae2261 · Cited by 2
Burghart, J., Meeker, S. P., Medina‐González, Y., & Ovarlez, G. (2026) · Macromolecules · doi:10.1021/acs.macromol.6c00383 · Cited by 2
Choi, W.-J., Kang, I., Oh, E.-S., Kim, W., Choe, Y., Kim, Y., Yoon, S. J., Yu, D. M., So, S., & Oh, K. (2025) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2025.100843 · Cited by 2
Predicting Particle-Size Distributions in Fuel-Cell Inks
Srivastav, H., Weber, A. Z., & Radke, C. J. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae5cd5 · Cited by 1
Self-citationGalkina, I. P., Faid, A. Y., Grigorev, N., Jiang, W., Borowski, P., Sunde, S., Shviro, M., Lehnert, W., Scheepers, F., & Mechler, A. K. (2026) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2026.155383 · Cited by 1
Suzuki, T., Akada, K., ENDO, K., Tokunaga, Y., Kitamura, S., Ishibashi, R., Sato, S., Sada, Y., Uesugi, M., Takeuchi, A., et al. (2026) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ae7194 · Cited by 1
The Effect of pH on Fuel-Cell Catalyst-Layer Inks
Berlinger, S. A., Dagan, N., McCloskey, B. D., & Weber, A. Z. (2018) · ECS Transactions · doi:10.1149/08613.0133ecst · Cited by 1
Self-citationLópez, J. J. C. (2019) · LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · Cited by 1
Jorshari, R. M. (2019) · UVic’s Research and Learning Repository (University of Victoria)
Suzuki, T., Doi, M., Shimizu, Y., TADENUMA, T., & Tsushima, S. (2020) · Transactions of the JSME (in Japanese) · doi:10.1299/transjsme.19-00364
“このうち,レーザーを用いた手法 ではその原理から再現性のあるデータを得るためには希薄スラリーを用いる必要があり,不透明なスラリーを評 価する場合には希釈による影響を考慮する必要がある(Shukla et al., 2017) .”
Bapat, S., & Segets, D. (2020) · ChemRxiv · doi:10.26434/chemrxiv.12278360
Advanced NMR methods and applications: diffusion, velocimetry and relaxation
Wang, J. (2023) · Open Access Victoria University of Wellington | Te Herenga Waka (Figshare) · doi:10.26686/wgtn.23643321
Yamada, M., & Norisuye, T. (2025) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2025.130777
Quantum Beam Analysis for Development of Polymer Electrolyte Fuel Cells
吉宗, 航., ヨシムネ, ワ., & YOSHIMUNE, W. (2024) · Institutional Repositories DataBase (IRDB)
呉, 丹. (2025) · Institutional Repositories DataBase (IRDB)
Ir–Ru Particles Enable Low-Loading Acidic Oxygen Evolution for Integrated Solar Devices
Conrad, C. L., Fehr, A., Botello, C. R., Elias, W. C., Jacobs, H. P., Yazdi, S., Terlier, T., Mohite, A. D., & Wong, M. S. (2026) · ACS electrochemistry. · doi:10.1021/acselectrochem.5c00473
Interface Engineering of Anode Layers for Alkaline Water Electrolysis
Jain, A. (2026) · DuEPublico (University of Duisburg-Essen) · doi:10.17185/duepublico/85195
Advanced Catalyst, Ink, and Emulsion Designs for Reductive Organic Electrosynthesis
Kräenbring, M. (2026) · DuEPublico (University of Duisburg-Essen) · doi:10.17185/duepublico/85207
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Heckenbach, S., Kubina, A., Kohsakowski, S., Özcan, F., & Segets, D. (2026) · Engineering Archive (engrXiv) · doi:10.31224/7584
Quarz, P. (2026) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000195965
Maulana, M. I., & Yu, J. (2026) · Chemical Communications · doi:10.1039/d6cc04009h
Choi, Y.-J., Kim, J. E., Jeong, M., Lee, M. S., Kim, J., Yoo, J.-Y., & Chin, B. D. (2026) · Journal of Information Display · doi:10.1007/s44469-026-00025-6
Functional inks for direct-write inkjet printing: materials, processing, and applications
Singh, A., Shad, F., & Mian, A. (2026) · Materials Design Synthesis and Processing · doi:10.1080/30666600.2026.2730067
Wei, F., Liu, J., Kosakian, A., Mouallem, J., & Secanell, M. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.183071
Self-citation
Metadata
- Authors
- Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M.
- Affiliations
- University of Alberta (CA)
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 6
- Pages
- F600-F609
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2604338135
- Cited by
- 137
- References
- 43
- Citations by year
- 2026: 10 · 2025: 21 · 2024: 23 · 2023: 18 · 2022: 12 · 2021: 19 · 2020: 14 · 2019: 10 · 2018: 9 · 2017: 1
- FWCI
- 3.87
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- Natural Science and Engineering Research Council of Canada (371088-10)
- Helmholtz-Alberta Innitiative (0)
- APC/NSERC Catalyst Research for Polymer Electrolyte Fuel Cell Network (14323)
- Canadian Foundation for Innovation (0)
- Department of Energy | EERE | Fuel Cell Technologies Program (FCT) (DE-AC02-05CH11231)
- Canadian School of Energy and Environment (0)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- proton exchange membrane fuel cells, catalyst ink, ink stability, carbon black, Nafion, particle aggregation, dispersion medium, isopropanol, dielectric constant, zeta potential, particle size, interaction energy, non-aqueous media
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.