Experimental and Theoretical Analysis of Ink Dispersion Stability for Polymer Electrolyte Fuel Cell Applications
Open accessThe DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Abstract
The aggregate size in fuel cell catalyst inks depends on the type of dispersion medium, particle concentration, and addition of stabilizing agents. In this work, ink stability and particle size of carbon black and carbon black/Nafion dispersions in four non-aqueous media, viz., methanol, ethanol, isopropanol and ethyl acetate are studied. Based on visual inspection, isopropanol is found to be the best medium for dispersion of carbon black inks. To rationalize this observation, a semi-empirical model based on diffusion-limited aggregation was developed to evaluate the rate of particle aggregation and predict the ink stability time for each dispersion medium. The proposed model supports the experimental observation by qualitatively predicting the same relationship between carbon stability and the dispersion media. The model also showed that the dielectric constant of the dispersion medium and the particle zeta potential are primarily responsible for the ink stability. Particle size for the different inks was determined by dynamic light scattering with and without dilution. Experimental results show that Nafion is a strong stabilizing agent, increasing the ink stability and decreasing the particle size of carbon aggregates. The beneficial effects of Nafion are independent of its concentration and are observed even at Nafion volume fractions of 10 wt%. The interaction energy is found to be a strong function of the surface potential for the dispersion medium with a higher dielectric constant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures













Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“al. found that the decrease in the primary and secondary agglomerates size resulting from dilution approaches 20%, through studying the ink with and without dilution by using a recent DLS apparatus [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“As the catalyst agglomerates are commonly covered by ionomer in the catalyst ink, solvent affects the dispersion or dispersion stability of catalyst likely through impacting the ionomer coverage on catalyst or the conformation of the adsorbed ionomer [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“When the I/C ratio reaches a certain value, increasing the content of ionomer in the catalyst ink further will not contribute to the size of agglomerates or increase the colloidal stability [34].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Experimental — accuracy not yet measuredThe source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“As shown in Fig. 15a-c, the state of the catalyst ink remarkably changes within 24 h of storage [189].”
From Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly (2023) · cites this paper as [189]
Experimental — accuracy not yet measuredThe cited source says what the claim attributes to it.
In the citing paper
“If the agglomerate size reaches a certain point, sedimentation would take place due to gravity, making the catalyst ink inhomogeneous [34,52].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [34]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Particle Deposition and Aggregation: Measurement, Modelling and Simulation
Elimelech, M. (1995) · Cited by 1,190
Electrokinetic and Colloid Transport Phenomena
Masliyah, J. H., & Bhattacharjee, S. (2006) · Wiley eBooks · doi:10.1002/0471799742 · Cited by 1,129
Self-citationFuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Soboleva, T., Zhao, X., Malek, K., Xie, Z., Navessin, T., & Holdcroft, S. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am900600y · Cited by 424
The Impact of Platinum Loading on Oxygen Transport Resistance
Greszler, T. A., Caulk, D., & Sinha, P. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.061212jes · Cited by 421
Anderson, W., Kozak, D., Coleman, V. A., Jämting, Å. K., & Trau, M. (2013) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2013.02.030 · Cited by 373
Unexplained transport resistances for low-loaded fuel-cell catalyst layers
Weber, A. Z., & Kusoglu, A. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02952f · Cited by 333
Self-citationNew Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Wee, J.-H., Lee, K.-Y., & Kim, S. H. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.12.051 · Cited by 261 · cited 1×
“UvdW = − A 6 · ( ai a j ai + a j ) · 1 r − (ai + a j ) [2]”
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Particle size and zeta potential of carbon black in liquid media
Xu, R., Wu, C., & Xu, H. (2007) · Carbon · doi:10.1016/j.carbon.2007.09.010 · Cited by 208
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Self-Organization in Catalyst Layers of Polymer Electrolyte Fuel Cells
Malek, K., Eikerling, M., Wang, Q., Navessin, T., & Liu, Z. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp072692k · Cited by 200
An Introduction to Interfaces and Colloids: The Bridge to Nanoscience
Berg, J. C. (2009) · WORLD SCIENTIFIC eBooks · doi:10.1142/7579 · Cited by 196
Uchida, M., Fukuoka, Y., Sugawara, Y., Ohara, H., & Ohta, A. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838863 · Cited by 191
Hao, L., Moriyama, K., Gu, W., & Wang, C.-Y. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0221508jes · Cited by 178
Modeling Low-Platinum-Loading Effects in Fuel-Cell Catalyst Layers
Yoon, W., & Weber, A. Z. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3597644 · Cited by 154
Self-citationWater in polymer electrolyte fuel cells: Friend or foe?
Eikerling, M. H., Kornyshev, A. A., & Kucernak, A. R. (2006) · Physics Today · doi:10.1063/1.2387087 · Cited by 144
Millington, B., Whipple, V., & Pollet, B. G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.024 · Cited by 141 · cited 1×
“i=1 ni ⎞ ⎠ [8] The collision efficiency, α, is the inverse of the stability ratio, W .”
BackgroundShukla, S., Domican, K., Karan, K., Bhattacharjee, S., & Secanell, M. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.01.028 · Cited by 133
Self-citationSmall-angle neutron scattering of perfluorosulfonated ionomers in solution
Aldebert, P., Dreyfus, B., & Pinéri, M. (1986) · Macromolecules · doi:10.1021/ma00164a035 · Cited by 118
Analysis of Inkjet Printed PEFC Electrodes with Varying Platinum Loading
Shukla, S., Stanier, D., Saha, M. S., Stumper, J., & Secanell, M. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.1111607jes · Cited by 106
Self-citationA kinetic theory approach to primary and secondary minimum coagulations and their combination
Marmur, A. (1979) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(79)90178-4 · Cited by 103
Fuel cell cathode catalyst layers from “green” catalyst inks
Xie, Z., Zhao, X., Adachi, M., Shi, Z., Mashio, T., Ohma, A., Shinohara, K., Holdcroft, S., & Navessin, T. (2008) · Energy & Environmental Science · doi:10.1039/b808613n · Cited by 96
Effect of dispersion solvent in catalyst ink on proton exchange membrane fuel cell performance
Huang, D.-C., Yu, P.-J., Liu, F.-J., Huang, S.-L., Hsueh, K.-L., Chen, Y.-C., Wu, C.-H., Chang, W.-C., & Tsau, F.-H. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18202-2 · Cited by 93
Understanding the Effect of Kinetic and Mass Transport Processes in Cathode Agglomerates
Moore, M. S., Wardlaw, P., Dobson, P., Boisvert, J. J., Putz, A. M. V., Spiteri, R. J., & Secanell, M. (2014) · Journal of The Electrochemical Society · doi:10.1149/2.010408jes · Cited by 86
Self-citationXu, F., Zhang, H., Ilavsky, J., Stanciu, L., Ho, D., Justice, M. J., Petrache, H. I., & Xie, J. (2010) · Langmuir · doi:10.1021/la1028228 · Cited by 82
The effect of materials on proton exchange membrane fuel cell electrode performance
Millington, B., Du, S., & Pollet, B. G. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.043 · Cited by 81
Takahashi, S., Shimanuki, J., Mashio, T., Ohma, A., Tohma, H., Ishihara, A., Ito, Y., Nishino, Y., & Miyazawa, A. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.068 · Cited by 76
Nanoporous Pt with High Surface Area by Reaction-Limited Aggregation of Nanoparticles
Viswanath, B., Patra, S., Munichandraiah, N., & Ravishankar, N. (2009) · Langmuir · doi:10.1021/la802938d · Cited by 73
SANS studies on catalyst ink of fuel cell
Shibayama, M., Matsunaga, T., Kusano, T., Amemiya, K., Kobayashi, N., & Yoshida, T. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.39842 · Cited by 66
High reflectance ta-C coatings in the extreme ultraviolet
Larruquert, J. I., Marcos, L. R.-D., Méndez, J. A., Martin, P. J., & Bendavid, A. (2013) · Optics Express · doi:10.1364/oe.21.027537 · Cited by 65
Santiago, D., Rodríguez-Calero, G. G., Rivera, H., Tryk, D. A., Scibioh, M. A., & Cabrera, C. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3489948 · Cited by 64
Colloidal structure of ionomer solutions in polar solvents
Gebel, G., & Loppinet, B. (1996) · Journal of Molecular Structure · doi:10.1016/s0022-2860(96)09266-6 · Cited by 45
Criterion for electrostatic stability of dispersions at low ionic strength
Morrison, I. D. (1991) · Langmuir · doi:10.1021/la00057a017 · Cited by 38
Effect of Organic Solvents on Catalyst Layer Structure in Polymer Electrolyte Membrane Fuel Cells
Chisaka, M., & Daiguji, H. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.3000592 · Cited by 28
Xiao, Y., Dou, M., Yuan, J., Hou, M., Song, W., & Sunden, B. A. (2012) · Journal of The Electrochemical Society · doi:10.1149/2.064203jes · Cited by 26
Rationalizing Catalyst Inks for PEMFC Electrodes Based on Colloidal Interactions
Shukla, S., Bhattacharjee, S., & Secanell, M. (2013) · ECS Transactions · doi:10.1149/05801.1409ecst · Cited by 22
Self-citationEffect of Electrode Patterning on PEM Fuel Cell Performance using Ink-Jet Printing Method
Shukla, S., Domican, K., & Secanell, M. (2014) · ECS Transactions · doi:10.1149/06403.0341ecst · Cited by 22
Self-citationCharacterization and Performance of Catalyst Layers Prepared by Inkjet Printing Technology
Saha, M. S., Tam, M., Berejnov, V., Susac, D., McDermid, S., Hitchcock, A. P., & Stumper, J. (2013) · ECS Transactions · doi:10.1149/05801.0797ecst · Cited by 19 · cited 1×
“A = 3 4 kB T ( p − m p + m )2 + 3hνe 16 √ 2 (n(2)p − n(2)m)(2) (n(2)p + n(2)m) [3]”
Experimental Analysis of Inkjet Printed Polymer Electrolyte Fuel Cell Electrodes
Shukla, S. (2016) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r3xk8516j · Cited by 10
Self-citationElectrical Double-Layer Interactions of Regular Arrays of Spheres
Kwon, G. W., Won, Y. S., & Yoon, B. J. (1998) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1998.5675 · Cited by 8
Sun, L., Zhang, H., Ilavsky, J., Li, Z., & Xie, J. (2013) · ECS Transactions · doi:10.1149/05002.1461ecst · Cited by 6
Research works printed but not linked: 1
- Israelachvili J. , Intermolecular and surface forces: revised third edition. Academic press, 2011.
Cited by
Rabiee, H., Ge, L., Zhang, X., Hu, S., Li, M., & Yuan, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03756g · Cited by 509
Recent Advances on PEM Fuel Cells: From Key Materials to Membrane Electrode Assembly
Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., Meng, L., Wang, N., Xing, L., Zhao, M., et al. (2023) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00190-w · Cited by 277
“15a–c, the state of the catalyst ink remarkably changes within 24 h of storage [189].”
Wang, M., Park, J. H., Kabir, S., Neyerlin, K. C., Kariuki, N. N., Lv, H., Stamenkovic, V. R., Myers, D. J., Ulsh, M., & Mauger, S. A. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b01037 · Cited by 192
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“Overall, many factors can affect ink stability, including the dispersion medium dielectric constant, zeta potential, ionomer loading and carbon support structure [94, 131, 178, 179].”
BackgroundMethodInfluentialRheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Khandavalli, S., Park, J. H., Kariuki, N. N., Myers, D. J., Stickel, J. J., Hurst, K., Neyerlin, K. C., Ulsh, M., & Mauger, S. A. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b15039 · Cited by 153
Metadata
- Authors
- Shukla, S., Bhattacharjee, S., Weber, A. Z., & Secanell, M.
- Affiliations
- University of Alberta (CA)
- Lawrence Berkeley National Laboratory (US)
- Venue
- Journal of The Electrochemical Society
- Publisher
- The Electrochemical Society
- Published
- 2017
- Volume
- 164
- Issue
- 6
- Pages
- F600-F609
- ISSN
- 0013-4651 (ISSN-L)
- 1945-7111
- OpenAlex
- W2604338135
- Cited by
- 137
- References
- 43
- Citations by year
- 2026: 10 · 2025: 21 · 2024: 23 · 2023: 18 · 2022: 12 · 2021: 19 · 2020: 14 · 2019: 10 · 2018: 9 · 2017: 1
- FWCI
- 3.87
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- cc-by
- Locations
- Journal of The Electrochemical Society (publishedVersion, cc-by)
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- Natural Science and Engineering Research Council of Canada (371088-10)
- Helmholtz-Alberta Innitiative (0)
- APC/NSERC Catalyst Research for Polymer Electrolyte Fuel Cell Network (14323)
- Canadian Foundation for Innovation (0)
- Department of Energy | EERE | Fuel Cell Technologies Program (FCT) (DE-AC02-05CH11231)
- Canadian School of Energy and Environment (0)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Keywords
- proton exchange membrane fuel cells, catalyst ink, ink stability, carbon black, Nafion, particle aggregation, dispersion medium, isopropanol, dielectric constant, zeta potential, particle size, interaction energy, non-aqueous media
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.