The DOI matches its Crossref record; 53 of the 57 references it cites were found in a registry or an index.
Silica Aerogel: Synthesis and Applications
Open accessAbstract
Silica aerogels have drawn a lot of interest both in science and technology because of their low bulk density (up to 95% of their volume is air), hydrophobicity, low thermal conductivity, high surface area, and optical transparency. Aerogels are synthesized from molecular precursors by sol‐gel processing. Special drying techniques must be applied to replace the pore liquid with air while maintaining the solid network. Supercritical drying is most common; however, recently developed methods allow removal of the liquid at atmospheric pressure after chemical modification of the inner surface of the gels, leaving only a porous silica network filled with air. Therefore, by considering the surprising properties of aerogels, the present review addresses synthesis of silica aerogels by the sol‐gel method, as well as drying techniques and applications in current industrial development and scientific research.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“The aerogel network is established through two primary processes: the breakdown of the precursor (hydrolysis) and the subsequent condensation of the gel.”
From Silica Aerogels as a Promising Vehicle for Effective Water Splitting for Hydrogen Production (2025) · cites this paper as [46]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(1990) · Cited by 9,358
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-22386-5 · Cited by 3,311
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Studien über die Bildung und Umwandlung fester Körper
Ostwald, W. (1897) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1897-2233 · Cited by 2,173
Hydrolysis and condensation of silicates: Effects on structure
Brinker, C. J. (1988) · Journal of Non-Crystalline Solids · doi:10.1016/0022-3093(88)90005-1 · Cited by 1,303
(2002) · Wiley eBooks · doi:10.1002/9783527618286 · Cited by 1,226
Kistler, S. S. (1932) · The Journal of Physical Chemistry · doi:10.1021/j150331a003 · Cited by 948
Woolcock, W. J. U. (1924) · Journal of the Society of Chemical Industry · doi:10.1002/jctb.5000434102 · Cited by 882
Aerogels and related porous materials
Gesser, H. D., & Goswami, P. C. (1989) · Chemical Reviews · doi:10.1021/cr00094a003 · Cited by 567
Synthesis of flexible silica aerogels using methyltrimethoxysilane (MTMS) precursor
Rao, A. V., Bhagat, S. D., Hirashima, H., & Pajonk, G. M. (2006) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2006.03.044 · Cited by 420
Research works printed but not linked: 9
- Flory P. J., 1953, Principal of Polymer Chemistry
- Livage J., 1986, Science of Ceramic Processing
- Bradley D. C., 1978, Metal Alkoxides
- MurataK. J.andSchlechtW. G. The significance of internal structure in gelatinizing silicate minerals U.S. Geological Survey Bulletin 1946 950 no. 25–33 35–82.
- Vorankov M. G., 1978, The Siloxane Bond
- Nicolaon G. A., 1968, New preparation process for silica xerogels and aerogels, and their textural properties, Bulletin de la Société Chimique de France, 5, 1900
- Brinker C. J., 1990, The Processing and the Chemistry of Sol-Gel Processing
- 10.1111/j.1151-2916.2001.tb00677.x · DOI
- Juzkow M., 2002, Aerogel Capacitors Support Pulse, Hold-Up, and Main Power Applications
Cited by
Sorted by citations
Items 101–200 of 755
The effect of synthesis conditions and process parameters on aerogel properties
Konuk, Ö. P., Alsuhile, A. A. A. M., Yousefzadeh, H., Ülker, Z., Bozbağ, S. E., García‐González, C. A., Smirnova, I. V., & Erkey, C. (2023) · Frontiers in Chemistry · doi:10.3389/fchem.2023.1294520 · Cited by 81
Baskaran, K., Ali, M., Gingrich, K., Porter, D. L., Chong, S., Riley, B. J., Peak, C. W., Naleway, S. E., Zharov, I., & Carlson, K. L. (2022) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2022.111874 · Cited by 80
A comprehensive study on the gelation process of silica gels from sodium silicate
Katoueizadeh, E., Rasouli, M., & Zebarjad, S. M. (2020) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2020.07.020 · Cited by 75
Recent trends and future prospects of nanostructured aerogels in water treatment applications
Mariana, M., Khalil, H. P. S. A., Yahya, E. B., Olaiya, N. G., Alfatah, T., Suriani, A. B., & Mohamed, A. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.102481 · Cited by 76
Shi, D., Sun, Y., Feng, J., Yang, X., Han, S., Mi, C., Jiang, Y., & Qi, H. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.07.029 · Cited by 74
Aerogels for Biomedical, Energy and Sensing Applications
Noman, M. T., Amor, N., Ali, A., Petrik, S., Coufal, R., Adach, K., & Fijalkowski, M. (2021) · Gels · doi:10.3390/gels7040264 · Cited by 73
N., N. H., Tran, V. T., Tran, Q. B. M., Le, K. A., Thai, Q. B., Nguyen, P. T. T., Duong, H. M., & Le, P. K. (2020) · Journal of Polymers and the Environment · doi:10.1007/s10924-020-01955-w · Cited by 76
Wen Jei, Y. A. N. G., Liu, J., Wang, Y., & Gao, S. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.109583 · Cited by 72
Mechanical Properties of Metal Oxide Aerogels
Benad, A., Jürries, F., Vetter, B., Klemmed, B., Hübner, R., Leyens, C., & Eychmüller, A. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03911 · Cited by 72
Advances in multiple reinforcement strategies and applications for silica aerogel
Xue, J., Han, R., Li, Y., Zhang, J., Liu, J., & Yang, Y. (2023) · Journal of Materials Science · doi:10.1007/s10853-023-08945-y · Cited by 71
Modeling silica aerogel optical performance by determining its radiative properties
Zhao, L., Yang, S., Bhatia, B., Strobach, E., & Wang, E. N. (2016) · AIP Advances · doi:10.1063/1.4943215 · Cited by 71
Flexible Polyimide Aerogels Derived from the Use of a Neopentyl Spacer in the Backbone
Cashman, J. L., Nguyen, B. N., Dosa, B., & Meador, M. A. B. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.0c00153 · Cited by 68
Nguyen, P. T. T., N., N. H., Goh, X. Y., Goh, C., Ong, R. H., Le, P. K., Phan-Thien, N., & Duong, H. M. (2021) · Waste and Biomass Valorization · doi:10.1007/s12649-021-01627-3 · Cited by 72
Han, X., Liang, J., Fukuda, S., Zhu, L., & Wang, S. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106424 · Cited by 68
Li, D., Ke, Z., Xu, K., Dai, F., Wang, M., Chen, C., Qian, G., & Yu, Y. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.141722 · Cited by 68
Adsorption and thermal properties of the bovine serum albumin–silicon dioxide system
Wisniewska, M. A., Szewczuk‐Karpisz, K., & Sternik, D. (2014) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-014-4300-7 · Cited by 68
Graphene oxide enhanced polyacrylamide-alginate aerogels catalysts
Shan, C., Wang, L., Li, Z., Zhong, X., Hou, Y., Zhang, L., & Shi, F. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.024 · Cited by 68
Cai, H., Jiang, Y., Feng, J., Chen, Q., Zhang, S., Li, L., & Feng, J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.02.011 · Cited by 68
Mishra, R., Militký, J., & Venkataraman, M. (2019) · Elsevier eBooks · doi:10.1016/b978-0-08-102609-0.00007-9 · Cited by 67
Chen, C., Ding, R., Yang, S., Wang, J., Chen, W., Zong, L., & Xie, J. (2020) · LWT · doi:10.1016/j.lwt.2020.109568 · Cited by 66
Novel nanostructured composites of silica aerogels with a metal organic framework
Ülker, Z., Eruçar, İ., Keskın, S., & Erkey, C. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.11.040 · Cited by 65
Kim, M., Eo, K., Lim, H. J., & Kwon, Y. K. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.07.021 · Cited by 64
Fabrication of bioaerogels from camelina seed mucilage for food applications
Ubeyitogullari, A., & Ciftci, O. N. (2019) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2019.105597 · Cited by 64
Featherlight, Mechanically Robust Cellulose Ester Aerogels for Environmental Remediation
Tripathi, A., Parsons, G. N., Rojas, O. J., & Khan, S. A. (2017) · ACS Omega · doi:10.1021/acsomega.7b00571 · Cited by 65
Three-Dimensional Reticulated, Spongelike, Resilient Aerogels Assembled by SiC/Si3N4 Nanowires
Zhang, X., Zhang, Y., Qu, Y., Wu, J., Zhang, S., & Yang, J. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04917 · Cited by 63
Jayakumar, S., Saravanan, T., & Philip, J. (2023) · Hybrid Advances · doi:10.1016/j.hybadv.2023.100100 · Cited by 66
Ma, J., Ye, F., Yang, C., Ding, J., Lin, S., Zhang, B., & Liu, Q. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.06.036 · Cited by 62
Kang, A.-H., Shang, K., Ye, D., Wang, Y.-T., Wang, H., Zhu, Z., Liao, W., Xu, S., Wang, Y., & Schiraldi, D. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.158 · Cited by 62
Vareda, J. P., Maximiano, P., Cunha, L. P. A. H., Ferreira, A. F., Simões, P. N., & Durães, L. M. R. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.10.035 · Cited by 62
Investigation of Carrageenan Aerogel Microparticles as a Potential Drug Carrier
Obaidat, R., Alnaief, M., & Mashaqbeh, H. (2018) · AAPS PharmSciTech · doi:10.1208/s12249-018-1021-4 · Cited by 62
Jiang, F., Hu, S., & Hsieh, Y. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b01515 · Cited by 62
Song, S., Cho, H., & Kim, H. T. (2017) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.12.025 · Cited by 61
Awang, N., Nasir, A. M., Yajid, M. A. M., & Jaafar, J. (2021) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2021.105437 · Cited by 58
Polysaccharide-Based Aerogel Production for Biomedical Applications: A Comparative Review
Guastaferro, M., Reverchon, E., & Baldino, L. (2021) · Materials · doi:10.3390/ma14071631 · Cited by 60
Walker, R. C., Potochniak, A. E., Hyer, A. P., & Ferri, J. K. (2021) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102464 · Cited by 61
Tripathi, A., Parsons, G. N., Khan, S. A., & Rojas, O. J. (2018) · Scientific Reports · doi:10.1038/s41598-018-19720-4 · Cited by 59
Effect of micro-sized silica aerogel on the properties of lightweight cement composite
Shah, S. N., Mo, K. H., Yap, S. P., & Radwan, M. K. H. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.123229 · Cited by 58
Towards an energy efficient cement composite incorporating silica aerogel: A state of the art review
Shah, S. N., Mo, K. H., Yap, S. P., & Radwan, M. K. H. (2021) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103227 · Cited by 58
Experimental and theoretical investigation of supercritical drying of silica alcogels
Özbakır, Y., & Erkey, C. (2014) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2014.12.001 · Cited by 58
Kucharek, M., MacRae, W., & Yang, L. (2020) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2020.106108 · Cited by 58
Zhang, H., Zhang, C., Ji, W., Wang, X., Li, Y., & Tao, W.-Q. (2018) · Molecules · doi:10.3390/molecules23092198 · Cited by 57
Organic–Inorganic Polymer Hybrids: Synthetic Strategies and Applications
Krasia‐Christoforou, T. (2015) · Springer eBooks · doi:10.1007/978-3-319-12868-9_2 · Cited by 57
A fast synthesis of silica aerogel powders-based on water glass via ambient drying
Pan, Y., He, S., Cheng, X., Li, Z., Li, C., Huang, Y., & Gong, L. (2017) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-017-4312-4 · Cited by 57
Hydrophobic silica aerogel reinforced with carbon nanotube for oils removal
Sun, T., Zhuo, Q., Liu, X., Sun, Z., Wu, Z., & Fan, H. (2014) · Journal of Porous Materials · doi:10.1007/s10934-014-9845-0 · Cited by 56
Efficient adsorption of multiple heavy metals with tailored silica aerogel-like materials
Vareda, J. P., & Durães, L. M. R. (2017) · Environmental Technology · doi:10.1080/09593330.2017.1397766 · Cited by 54
Parale, V. G., Lee, K.-Y., Jung, H.-N.-R., Nah, H.-Y., Choi, H., Kim, T.-H., Phadtare, V. D., & Park, H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.189 · Cited by 56
Self-citationMesoporous composite Ni-C-N/SA for selective adsorption of methylene blue from water
Dai, C., Zhang, M., Guo, X., & Ma, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127181 · Cited by 55
Hydroxyl modification of silica aerogel: An effective adsorbent for cationic and anionic dyes
Chen, K., Feng, Q., Ma, D., & Huang, X. (2021) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2021.126331 · Cited by 55
Yang, H., Zhu, M., & Li, Y. (2022) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-022-05750-y · Cited by 55
Kaya, G. G., Yılmaz, E., & Deveci, H. (2019) · Advanced Powder Technology · doi:10.1016/j.apt.2019.12.013 · Cited by 54
Optically-switchable thermally-insulating VO2-aerogel hybrid film for window retrofits
Zhao, X., Mofid, S. A., Jelle, B. P., Tan, G., Yin, X., & Yang, R. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115663 · Cited by 54
Ahmad, A., Noor, A. E., Anwar, A., Majeed, S., Khan, S., Nisa, Z. U., Ali, S., Gnanasekaran, L., Rajendran, S., & Li, H. (2024) · Environmental Research · doi:10.1016/j.envres.2024.119481 · Cited by 52
RetractedQuero, F., & Rosenkranz, A. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202100952 · Cited by 53
Almeida, C. M. R., Ghica, M. E., Ramalho, A. L., & Durães, L. M. R. (2021) · Journal of Materials Science · doi:10.1007/s10853-021-06142-3 · Cited by 52
Nguyen, V. T., Ha, L. Q., Van, L. C. T., Huynh, P. T. B., Nguyen, D. M., Nguyen, V. P., Tran, T. H., & Hoang, D. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.109523 · Cited by 52
From bamboo leaf to aerogel: Preparation of water glass as a precursor
Kow, K.-W., Yusoff, R. B., Raman, A. A. A., & Abdullah, E. C. (2013) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.11.041 · Cited by 52
Ambient pressure dried tetrapropoxysilane-based silica aerogels with high specific surface area
Parale, V. G., Han, W., Jung, H.-N.-R., Lee, K.-Y., & Park, H. (2017) · Solid State Sciences · doi:10.1016/j.solidstatesciences.2017.10.016 · Cited by 53
Self-citationCurrent Status of Cellulosic and Nanocellulosic Materials for Oil Spill Cleanup
Fürtauer, S., Hassan, M., El-Sherbiny, A., Gabal, S. A., Mehanny, S., & Abushammala, H. (2021) · Polymers · doi:10.3390/polym13162739 · Cited by 52
Ma, H., Zheng, X., Luo, X., Yi, Y., & Yang, F. (2018) · Materials · doi:10.3390/ma11020214 · Cited by 51
N., N. H., Le, T. M., Tran, H. Q., Pham, N. Q., Le, K. A., Nguyen, P. T. T., Duong, H. M., Lê, A. T., & Le, P. K. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129138 · Cited by 50
3D assembly of preformed colloidal nanoparticles into gels and aerogels: function-led design
Wen, D., & Eychmüller, A. (2017) · Chemical Communications · doi:10.1039/c7cc03862c · Cited by 53
Synthesis and characterization of silica aerogel as a promising drug carrier system
Mohammadian, M., Kashi, T. S. J., Erfan, M., & Soorbaghi, F. P. (2017) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2017.12.017 · Cited by 50
Cai, H., Jiang, Y., Chen, Q., Zhang, S., Li, L., Feng, J., & Feng, J. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.09.014 · Cited by 50
Synthesis of inorganic aerogels via rapid gelation using chloride precursors
Schäfer, H., Milow, B., & Ratke, L. (2013) · RSC Advances · doi:10.1039/c3ra41688g · Cited by 49
Ferreiro-Rangel, C. A., & Gelb, L. D. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp3128737 · Cited by 49
Mechanical and thermal conductive properties of fiber‐reinforced silica‐alumina aerogels
Yu, Y., Peng, K., Fang, J., Zhang, R., Wang, G., & Peng, X. (2018) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12891 · Cited by 49
Ülker, Z., & Erkey, C. (2016) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.05.033 · Cited by 48
Safaei‐Ghomi, J., Tavazo, M., & Mahdavinia, G. H. (2017) · Ultrasonics Sonochemistry · doi:10.1016/j.ultsonch.2017.07.015 · Cited by 48
Nguyen, Q., Rizvandi, R., Karimipour, A., Malekahmadi, O., & Bach, Q. (2020) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-020-04885-w · Cited by 48
The Synthesis and Polymer-Reinforced Mechanical Properties of SiO2 Aerogels: A Review
Zhan, W., Chen, L., Kong, Q., Li, L., Chen, M., Jiang, J., Li, W., Shi, F., & Xu, Z. (2023) · Molecules · doi:10.3390/molecules28145534 · Cited by 47
Xu, Y., Sui, Z., Xu, B., Duan, H., & Zhang, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30565h · Cited by 49
Sorour, M. H., Hani, H. A., Bazedi, G. A. A., & EL-Rafei, A. M. (2016) · Journal of Porous Materials · doi:10.1007/s10934-016-0200-5 · Cited by 47
Chen, Y., Li, D., Xie, X.-Q., Gao, Y., & He, Y. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.118842 · Cited by 47
Choi, H., Parale, V. G., Kim, T., Choi, Y., Tae, J., & Park, H. (2020) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2020.110092 · Cited by 47
Self-citationToward Tailoring Chemistry of Silica-Based Phase Change Materials for Thermal Energy Storage
Chen, X., Tang, Z., Chang, Y., Gao, H., Cheng, P., Tao, Z., & Lv, J. (2020) · iScience · doi:10.1016/j.isci.2020.101606 · Cited by 47
Wu, H., Liao, Y., Ding, Y., Wang, H., Peng, C., & Yin, S. (2013) · Heat Transfer Engineering · doi:10.1080/01457632.2013.863090 · Cited by 46
The role of aerogel-based sorbents in microextraction techniques
Jalili, V., Barkhordari, A., & Heidari, M. (2019) · Microchemical Journal · doi:10.1016/j.microc.2019.04.028 · Cited by 46
Mattarelli, M., Vassalli, M., & Caponi, S. (2020) · ACS Photonics · doi:10.1021/acsphotonics.0c00801 · Cited by 46
Atomistic-level study of the mechanical behavior of amorphous and crystalline silica nanoparticles
Issa, H. K., Taherizadeh, A., & Maleki, A. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.05.272 · Cited by 45
Sodium silicate-derived aerogels: effect of processing parameters on their applications
Minju, N., Nair, B. N., & Savithri, S. (2021) · RSC Advances · doi:10.1039/d0ra09793d · Cited by 45
Wang, Q., Chen, J., Gui, B., Zhai, T., & Yang, D. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.12.003 · Cited by 45
Sanli, D., & Erkey, C. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am403200d · Cited by 45
Physical properties of clay aerogel composites: An overview
Madyan, O. A., Fan, M., Feo, L., & Hui, D. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.06.057 · Cited by 45
Manufacturing silica aerogel and cryogel through ambient pressure and freeze drying
Luigi, M. D., Guo, Z., An, L., Armstrong, J. N., Zhou, C., & Ren, S. (2022) · RSC Advances · doi:10.1039/d2ra03325a · Cited by 44
Mechanical properties of silica aerogels controlled by synthesis parameters
Babiarczuk, B., Lewandowski, D., Kierzek, K., Detyna, J. D., Jones, W., Kaleta, J., & Krzak, J. (2023) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2023.122171 · Cited by 45
Advances in copper-based catalysts for sustainable hydrogen production via methanol steam reforming
Abiso, A. M., Fasanya, O. O., Suleiman, M. Y., Atta, A. Y., Dutta, J., & Jibril, B. E.-Y. (2024) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2024.100625 · Cited by 44
Liu, S., Wu, X., Li, Y., Cui, S., Shen, X., & Tan, G. (2021) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2021.116745 · Cited by 44
Muhammad, S., Yahya, E. B., Khalil, H. P. S. A., Marwan, M., & Albadn, Y. M. (2023) · Agriculture · doi:10.3390/agriculture13010208 · Cited by 45
Talebi, Z., Shoushtari, A. M., Bahramian, A. R., & Abdouss, M. (2014) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.04.015 · Cited by 43
New porous polycaprolactone–silica composites for bone regeneration
Bonilla, C. E. P., Trujillo, S., Demirdögen, B., Perilla, J. E., Elçin, Y. M., & Ribelles, J. L. G. (2014) · Materials Science and Engineering C · doi:10.1016/j.msec.2014.04.024 · Cited by 43
Synthesis, structure and thermal protective behavior of silica aerogel/PET nonwoven fiber composite
Talebi, Z., Shoushtari, A. M., Bahramian, A. R., & Abdouss, M. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-2154-z · Cited by 43
Datta, D., & Halder, G. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01386-2 · Cited by 43
KALKAN, Ş. O., & Gündüz, L. (2023) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2023.134066 · Cited by 42
Zhu, Z., Zhang, W., Huang, H., Li, W., Ling, H., & Zhang, H. (2025) · Gels · doi:10.3390/gels11050357 · Cited by 42
Production of Porous Silica Microparticles by Membrane Emulsification
Dragosavac, M. M., Vladisavljević, G. T., Holdich, R. G., & Stillwell, M. T. (2011) · Langmuir · doi:10.1021/la202974b · Cited by 42
Hydrophobic silica aerogels by silylation
Duan, Y., Jana, S. C., Lama, B., & Espe, M. P. (2016) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2016.01.016 · Cited by 42
Pineda-Vásquez, T., Botero, A. E. C., Ramírez-Carmona, M., Torres-Taborda, M., Soares, C. H. L., & Hotza, D. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie404318w · Cited by 42
Effective and simple methodology to produce nanocellulose-based aerogels for selective oil removal
Tarrés, Q., Oliver-Ortega, H., Llop, M. F., Pèlach, M. À., Delgado‐Aguilar, M., & Mutjé, P. (2016) · Cellulose · doi:10.1007/s10570-016-1017-8 · Cited by 42
Sol–Gel-Derived Silver-Nanoparticle-Embedded Thin Film for Mass Spectrometry-Based Biosensing
Gamez, R. C., Castellana, E. T., & Russell, D. H. (2013) · Langmuir · doi:10.1021/la4008526 · Cited by 41
Aerogel Spring‐Back Correlates with Strain Recovery: Effect of Silica Concentration and Aging
Sivaraman, D., Zhao, S., Iswar, S., Lattuada, M., & Malfait, W. J. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202100376 · Cited by 40
Metadata
- Authors
- Gurav, J. L., Jung, I.-K., Park, H.-H., Kang, E. S., & Nadargi, D. Y.
- Affiliations
- Yonsei University (KR)
- Agency for Defense Development (KR)
- Empa (CH)
- Corresponding author
- Park, Hyung-Ho
- Venue
- Journal of Nanomaterials
- Publisher
- Wiley
- Published
- 2010-01
- Volume
- 2010
- Issue
- 1
- ISSN
- 1687-4110 (ISSN-L)
- 1687-4129
- OpenAlex
- W2007762157
- Cited by
- 756
- References
- 57
- Citations by year
- 2026: 32 · 2025: 59 · 2024: 69 · 2023: 74 · 2022: 58 · 2021: 104 · 2020: 56 · 2019: 52 · 2018: 42 · 2017: 54 · 2016: 38 · 2015: 37 · 2014: 30 · 2013: 27 · 2012: 16
- FWCI
- 7.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Journal of Nanomaterials (publishedVersion, cc-by)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion, cc-by)
- Funders
- Drug and Alcohol Peer Advisors
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Aerogels and thermal insulation
- Physical Sciences › Materials Science › Materials Chemistry › Mesoporous Materials and Catalysis
- Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis
- Keywords
- silica aerogel, sol-gel synthesis, supercritical drying, atmospheric pressure drying, low thermal conductivity, high surface area, optical transparency, hydrophobicity, aerogel applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
