Synthesis of Block Copolymers of Varying Architecture Through Suppression of Transesterification during Coordinated Anionic Ring Opening Polymerization
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Well-defined di- and triblock copolymers consisting of ε-caprolactone (CL), L-lactide (LA), and trimethylene carbonate (TMC) were synthesized via “PLA first route” in coordinated anionic ring opening polymerization/copolymerization (CAROP) with tin (II) octoate as catalyst. The desired block structure was preserved by use of protective additive α-methylstyrene by preventing the transesterification side-reactions. MALDI-TOF analysis revealed that the protection mechanism is associated with α-methylstyrene and tin (II) octoate complexation. Additionally, it was shown that use of α-methylstyrene in ring opening polymerization allowed the formation of polyesters with high molar mass.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Later, this study has been widely used as reference to demonstrate the presence of transesterification for any type of block copolymers based on poly(lactide) [19, 20, 22].”
From A simple and general approach for the synthesis of biodegradable triblock copolymers by organocatalytic ROP from poly(lactide) macroinitiators (2020) · cites this paper as [20]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The return of a forgotten polymer—Polycaprolactone in the 21st century
Woodruff, M. A., & Hutmacher, D. W. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.04.002 · Cited by 4,033 · cited 1×
“However, it is difficult to reach molar masses greater than 60–70 kDa for these polymers using the CAROP reaction due to transesterification [33, 34].”
MethodRecent Developments in Ring Opening Polymerization of Lactones for Biomedical Applications
Albertsson, A.-C., & Varma, I. K. (2003) · Biomacromolecules · doi:10.1021/bm034247a · Cited by 1,582 · cited 1×
“Biodegradable block copolymers prepared from L-lactide, εcaprolactone, 1,4-dioxan-2-one, and trimethylene carbonate have been synthesised and studied extensively during recent decades [1, 2].”
BackgroundGee, G. (1972) · Polymer · doi:10.1016/0032-3861(72)90025-0 · Cited by 1,360
The mechanical design of spider silks: from fibroin sequence to mechanical function
Gosline, J. M., Guerette, P. A., Ortlepp, C. S., & Savage, K. N. (1999) · Journal of Experimental Biology · doi:10.1242/jeb.202.23.3295 · Cited by 1,165
Biodegradable polymers applied in tissue engineering research: a review
Martina, M., & Hutmacher, D. W. (2007) · Polymer International · doi:10.1002/pi.2108 · Cited by 449 · cited 1×
“Additionally, when crosslinked, block structures with flanking hydrophobic regions allow the formation of hydrogels with high swelling capacity, a feature required in scaffold-based tissue engineering [19].”
BackgroundAmgoune, A., Thomas, C. M., Roisnel, T., & Carpentier, J. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200500856 · Cited by 423 · cited 3×
“It is possible that the slight difference in structure between αmethylstyrene and styrene is important as it is known that the difference in one methyl group in a ligand for a given catalyst can influence the resulting product of the CAROP reaction [16].”
BackgroundKowalski, A., Duda, A., & Penczek, S. (2000) · Macromolecules · doi:10.1021/ma9906940 · Cited by 407
Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture
Stridsberg, K. M., Ryner, M., & Albertsson, A.-C. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_2 · Cited by 375 · cited 1×
“Biodegradable block copolymers prepared from L-lactide, εcaprolactone, 1,4-dioxan-2-one, and trimethylene carbonate have been synthesised and studied extensively during recent decades [1, 2].”
BackgroundHuang, M.-H., Li, S., & Vert, M. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.054 · Cited by 222 · cited 2×
“However, a random copolymer is obtained when PLA is initially synthesised followed by PCL [5, 6].”
BackgroundMethodJacobs, C., Dubois, P., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00011a001 · Cited by 218
Melt block copolymerization of ?-caprolactone andL-lactide
In't Veld, P. J. A., Velner, E. M., Van De Witte, P., Hamhuis, J., Dijkstra, P. J., & Feijen, J. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(19970130)35:2<219::aid-pola3>3.0.co;2-n · Cited by 197
Rhazi, M., Desbri�res, J., Tolaimate, A., Alagui, A., & Vottero, P. (2000) · Polymer International · doi:10.1002/(sici)1097-0126(200004)49:4<412::aid-pi395>3.0.co;2-j · Cited by 155 · cited 1×
“The propensity of tin octoate to form complexes with nucleophilic substances has been well established [14].”
BackgroundShen, Y., Shen, Z., Zhang, Y., & Yao, K. (1996) · Macromolecules · doi:10.1021/ma9518060 · Cited by 153 · cited 1×
“have shown that the steric and electronic factors of catalysts and type of monomers utilised influence the formation of block copolymers [15, 16].”
BackgroundMacromolecular engineering of polylactones and polylactides
Dúbois, P., Jérôme, R., & Teyssié, P. (1989) · Polymer Bulletin · doi:10.1007/bf00718922 · Cited by 144
Control ofMn,Mw/Mn, end-groups, and kinetics in living polymerization of cyclic esters
Biela, T., Duda, A., & Penczek, S. (2002) · Macromolecular Symposia · doi:10.1002/1521-3900(200207)183:1<1::aid-masy1>3.0.co;2-q · Cited by 129 · cited 1×
“Comparing the influence of styrene and α-methylstyrene, we propose that the mechanism of segment protection with α-methylstyrene is a result of its higher propensity to participate in nucleophilic substitution reactions compared to styrene.”
BackgroundAndronova, N., & Albertsson, A.-C. (2006) · Biomacromolecules · doi:10.1021/bm060081c · Cited by 103 · cited 1×
“The varying physical properties of block polymers allows for the combination of “soft” and “hard” polymers giving rise to copolymers that can be tuned for specific function such as elasticity [3, 4].”
BackgroundDegée, P., Dúbois, P., Jacobsen, S., Fritz, H. ‐., & Jérôme, R. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990715)37:14<2413::aid-pola15>3.0.co;2-# · Cited by 98
Non-entropic and reversible long-range deformation of an encapsulating bioelastomer
Miserez, A., Wasko, S. S., Carpenter, C. F., & Waite, J. H. (2009) · Nature Materials · doi:10.1038/nmat2547 · Cited by 96
Dubois, P., Barakat, I., Jerome, R., & Teyssie, P. (1993) · Macromolecules · doi:10.1021/ma00069a003 · Cited by 86
Degée, P., Dubois, P., & Jérôme, R. (1997) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1997.021980623 · Cited by 59 · cited 1×
“Additionally, it has been found that the block structure PCL-PLA-PCL can be obtained using tetrakis Sn (IV) alkoxides [10], and it has been shown that additives (triphenylphosphine and 4picoline (C6H7N)) can direct the CAROP reaction [11, 12].”
MethodL,L‐Lactide and ε‐Caprolactone Block Copolymers by a ‘Poly(L,L‐lactide) Block First’ Route
Florczak, M., Libiszowski, J., Mosnacek, J., Duda, A., & Penczek, S. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700160 · Cited by 57
Synthesis and characterization of poly(?-caprolactone)-poly(ethylene glycol) block copolymer
Zhu, Z., Xiong, C., Zhang, L., & Deng, X. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(199703)35:4<709::aid-pola14>3.0.co;2-r · Cited by 51
Odelius, K., & Albertsson, A. (2008) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.22466 · Cited by 37 · cited 1×
“Average lengths of poly (ε-caprolactone) (LCL) and poly(L-lactide) blocks (LLA) were calculated from the intensities of the carbonyl signals [23, 24] using the equations below:”
MethodTetrakis Sn(IV) alkoxides as novel initiators for living ring‐opening polymerization of lactides
Kalmi, M., Lahcini, M., Castro, P. M., Lehtonen, O., Belfkira, A., Leskelä, M. A., & Repo, T. (2004) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.20028 · Cited by 33 · cited 1×
“Additionally, it has been found that the block structure PCL-PLA-PCL can be obtained using tetrakis Sn (IV) alkoxides [10], and it has been shown that additives (triphenylphosphine and 4picoline (C6H7N)) can direct the CAROP reaction [11, 12].”
MethodNucleation and crystallization of PS-b-PEO-b-PCL triblock copolymers
Müller, A. J., Arnal, M. L., & López-Carrasquero, F. (2002) · Macromolecular Symposia · doi:10.1002/1521-3900(200207)183:1<199::aid-masy199>3.0.co;2-s · Cited by 32
Andronova, N., Finne‐Wistrand, A., & Albertsson, A. (2003) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10781 · Cited by 25 · cited 1×
“…during Coordinated Anionic Ring Opening Polymerization Vitali T. Lipik1 and Marc J. M. Abadie1, 2 1 School of Materials Science and Engineering, Nanyang Technological University, Nanyang Avenue 50, Singapore 639798 2 Laboratory of Polymer Science and Advanced Organic Materials, LEMP/MAO,…”
BackgroundTin-initiated polymerizations of lactones: mechanistic and preparative aspects
Kricheldorf, H. R. (2000) · Macromolecular Symposia · doi:10.1002/1521-3900(200003)153:1<55::aid-masy55>3.0.co;2-t · Cited by 25 · cited 13×
“Additionally, these improvements would allow incorporation of CAROP reaction into the field of biomimetics whereby the properties of naturally occurring materials could be mimicked such as the adhesive materials of sea shells [20] or spiders silks [21].”
BackgroundInfluentialZhong, Z., Yu, D., Meng, F., Gan, Z., & Jing, X. (1999) · Polymer Journal · doi:10.1295/polymj.31.633 · Cited by 23 · cited 1×
“For example, Y(CF3COO)3/Al(iso-Bu)3 catalyst or the complex [Y(L6){N(SiHMe2)2}(THF)] promotes the initial synthesis of the PLA block, followed by the PCL block [7].”
BackgroundBaimark, Y., & Molloy, R. (2005) · Polymers for Advanced Technologies · doi:10.1002/pat.588 · Cited by 23 · cited 1×
“where ΔH is the experimental melting enthalpy of polymer in J/g and ΔH100 is the melting enthalpy of the polymer with 100% crystallinity and ΔH100 = 139 J/g for polycaprolactone [6] and ΔH100 = 93 J/g for polylactide [25].”
BackgroundTsutsumi, C., Yamamoto, K., Ichimaru, A., Nodono, M., Nakagawa, K., & Yasuda, H. (2003) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.10828 · Cited by 23 · cited 1×
“Commonly, blocks possessing high degradability that terminate the macromolecule lead to a high rate of degradability for the entire copolymer and vice versa [17].”
BackgroundKricheldorf, H. R., Behnken, G., Schwarz, G., & KOPF, J. (2008) · Macromolecules · doi:10.1021/ma071797i · Cited by 22 · cited 1×
“However, it is difficult to reach molar masses greater than 60–70 kDa for these polymers using the CAROP reaction due to transesterification [33, 34].”
MethodWidjaja, L. K., Kong, J. F., Chattopadhyay, S., Lipik, V. T., Liow, S. S., Abadie, M. J. M., & Venkatraman, S. S. (2011) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2011.11.001 · Cited by 21
Self-citationSynthesis and characterization of poly(ε‐caprolactone)‐poly(ethylene glycol) block copolymer
Zhu, Z., Xiong, C., Zhang, L., & Deng, X. (1997) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(199703)35:4<709::aid-pola14>3.3.co;2-j · Cited by 16
Tabka, M. T., & Widmaier, J. M. (1999) · Macromolecules · doi:10.1021/ma981751c · Cited by 8 · cited 1×
“Studies have shown the capability of tin octoate to react with AIBN, producing a complex with better catalytic working capacity [29].”
Background(1999) · doi:10.1002/(sici)1521-3935(19990701)200:7
(2000) · doi:10.1002/1521-3927(20001201)21:18
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e · cited 1×
“These features are desirable properties in the production of biodegradable packaging that are expected to have long enough shelf life time [18].”
BackgroundOn the mechanism of polymerization of cyclic esters induced by tin (II) octoate
(2000) · doi:10.1002/1521-3900(200007)157:1<61::aid-masy61>3.0.co;2-6 · cited 1×
“Comparing the influence of styrene and α-methylstyrene, we propose that the mechanism of segment protection with α-methylstyrene is a result of its higher propensity to participate in nucleophilic substitution reactions compared to styrene.”
Background
Research works printed but not linked: 5
- 1997, Journal of Polymer Science A, 35, 709
- 1999, Journal of Polymer Science A, 37, 2413
- 1997, Journal of Polymer Science A, 35, 219
- 2000, Macromolecular Rapid Communications, 21, 1327, 10.1002/1521-3927(20001201)21:18<1327::aid-marc1327>3.0.co;2-9 · doi:10.1002/1521-3927(20001201)21:18<1327::aid-marc1327>3.0.co;2-9
- 1999, Macromolecular Chemistry and Physics, 200, 1726, 10.1002/(sici)1521-3935(19990701)200:7<1726::aid-macp1726>3.0.co;2-b · doi:10.1002/(sici)1521-3935(19990701)200:7<1726::aid-macp1726>3.0.co;2-b
Cited by
Kaur, J., Gulati, M., Jha, N. K., Disouza, J., Patravale, V. B., Dua, K., & Singh, S. K. (2022) · Drug Discovery Today · doi:10.1016/j.drudis.2022.02.005 · Cited by 91
Tang, B., Schneiderman, D. K., Bidoky, F. Z., Frisbie, C. D., & Lodge, T. P. (2017) · ACS Macro Letters · doi:10.1021/acsmacrolett.7b00582 · Cited by 59
Quan, S. M., Wei, J., & Diaconescu, P. L. (2017) · Organometallics · doi:10.1021/acs.organomet.7b00672 · Cited by 50
Toshikj, N., Robin, J.-J., & Blanquer, S. (2020) · European Polymer Journal · doi:10.1016/j.eurpolymj.2020.109599 · Cited by 24
“Later, this study has been widely used as reference to demonstrate the presence of transesterification for any type of block copolymers based on poly(lactide) [19, 20, 22].”
MethodWord Prediction System for Text Entry in Hindi
Sharma, M. K., & Samanta, D. (2014) · ACM Transactions on Asian Language Information Processing · doi:10.1145/2617590 · Cited by 18
Metadata
- Authors
- Lipik, V. T., & Abadie, M. J. M.
- Affiliations
- Nanyang Technological University (SG)
- Corresponding author
- Lipik, Vitali T.
- ORCID
- Lipik, Vitali T.
- Venue
- International Journal of Biomaterials
- Publisher
- Hindawi Limited
- Published
- 2012
- Volume
- 2012
- Pages
- 1-11
- ISSN
- 1687-8787 (ISSN-L)
- 1687-8795
- PMC
- PMC3398607
- OpenAlex
- W2165332795
- Cited by
- 11
- References
- 37
- Citations by year
- 2024: 2 · 2022: 1 · 2021: 1 · 2020: 3 · 2017: 2 · 2015: 1 · 2014: 1
- FWCI
- 0.26
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- International Journal of Biomaterials (publishedVersion, cc-by)
- Europe PMC (PubMed Central) (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
- DR-NTU (Nanyang Technological University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- block copolymers, α-methylstyrene, ε-caprolactone, L-lactide, trimethylene carbonate, polyester synthesis
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.