The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Preparation and Evaluation of Gelatin-Chitosan-Nanobioglass 3D Porous Scaffold for Bone Tissue Engineering
Open accessAbstract
The aim of the present study was to prepare and characterize bioglass-natural biopolymer based composite scaffold and evaluate its bone regeneration ability. Bioactive glass nanoparticles (58S) in the size range of 20–30 nm were synthesized using sol-gel method. Porous scaffolds with varying bioglass composition from 10 to 30 wt% in chitosan, gelatin matrix were fabricated using the method of freeze drying of its slurry at 40 wt% solids loading. Samples were cross-linked with glutaraldehyde to obtain interconnected porous 3D microstructure with improved mechanical strength. The prepared scaffolds exhibited >80% porosity with a mean pore size range between 100 and 300 microns. Scaffold containing 30 wt% bioglass (GCB 30) showed a maximum compressive strength of2.2±0.1 MPa. Swelling and degradation studies showed that the scaffold had excellent properties of hydrophilicity and biodegradability. GCB 30 scaffold was shown to be noncytotoxic and supported mesenchymal stem cell attachment, proliferation, and differentiation as indicated by MTT assay and RUNX-2 expression. Higher cellular activity was observed in GCB 30 scaffold as compared to GCB 0 scaffold suggesting the fact that 58S bioglass nanoparticles addition into the scaffold promoted better cell adhesion, proliferation, and differentiation. Thus, the study showed that the developed composite scaffolds are potential candidates for regenerating damaged bone tissue.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exploring and Engineering the Cell Surface Interface
Stevens, M. M., & George, J. H. (2005) · Science · doi:10.1126/science.1106587 · Cited by 2,607
Characterization of a bovine collagen–hydroxyapatite composite scaffold for bone tissue engineering
Rodrigues, C. V. M., Serricella, P., Linhares, A. B. R., Guerdes, R. M., Borojevic, R., Rossi, M. A., Duarte, M. E. L., & Farina, M. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00410-1 · Cited by 322
Cited by
Afewerki, S., Sheikhi, A., Kannan, S., Ahadian, S., & Khademhosseini, A. (2019) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10124 · Cited by 409
Preethi Soundarya, S., Haritha Menon, A., Viji Chandran, S., & Selvamurugan, N. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.08.056 · Cited by 305
A review on chitosan centred scaffolds and their applications in tissue engineering
Ahmed, S., Annu, Ali, A., & Sheikh, J. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.176 · Cited by 264
Recent trends on biomaterials for tissue regeneration applications: Review
Farag, M. M. (2023) · Journal of Materials Science · doi:10.1007/s10853-022-08102-x · Cited by 173
Hybrid gelatin hydrogels in nanomedicine applications
Salahuddin, B., Wang, S., Sangian, D., Aziz, S., & Gu, Q. (2021) · ACS Applied Bio Materials · doi:10.1021/acsabm.0c01630 · Cited by 134
Metadata
- Authors
- Maji, K., Dasgupta, S., Pramanik, K., & Bissoyi, A.
- Venue
- International Journal of Biomaterials
- Publisher
- Wiley
- Published
- 2016
- Volume
- 2016
- Pages
- 1-14
- ISSN
- 1687-8787 (ISSN-L)
- 1687-8795
- OpenAlex
- W2276693205
- Cited by
- 224
- References
- 2
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Evaluation of Gelatin-Chitosan-Nanobioglass 3D Porous Scaffold for Bone Tissue Engineering. https://app.cochat.ai/papers/10.1155/2016/9825659
- The paper
- Maji, K., Dasgupta, S., Pramanik, K., & Bissoyi, A. (2016). Preparation and Evaluation of Gelatin-Chitosan-Nanobioglass 3D Porous Scaffold for Bone Tissue Engineering. International Journal of Biomaterials. https://doi.org/10.1155/2016/9825659
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.